Drive kit for sliding gates up to 600 kg/8 m NICE Robus RB600 (X)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
In stock
€712.35 including VAT
| Weight |
|---|
| 13 kg |
Description of Drive kit for sliding gates up to 600 kg/8 m NICE Robus RB600 (X)
The NICE RB600 drive will soon be replaced by a newer model NICE RBS600. See the benefits of the newer NICE RBS400 and RBS600 models.
NICE Robus RB600 gate opener is designed for sliding gates weighing up to 600 kg and a passage width of up to 8 m. It has an electromechanical stop switch. The opener is non-reversible. Detailed technical specifications ». Download the manual ».
| The set includes: | NICE-RB600-X | |||
|---|---|---|---|---|
 |
1 × | NICE Robus RB600 gate opener | NICE-RB600 | |
|
Electromechanical NICE Robus RB600 gate opener with an RBA3R10 control unit, suitable for gates weighing up to 600 kg and with a gate leaf length of up to 8 m. |
Details  |
|||
 |
2 × | NICE Era Flor FLO2RE remote control | NICE-FLO2RE | |
|
Two-button remote control for operating a gate automatically from a distance. You can use it to control two devices or send two types of commands to one device. |
Details |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the passageway. They create an infrared beam which, when interrupted by a vehicle or pedestrian, for example, signals the opener to stop the gate or prevent it from opening. |
Details |
|||
 |
1 × | NICE ELDC LED warning light with antenna | NICE-ELDC | |
|
NICE LED flashing ELDC warning light made of impact-resistant polycarbonate, with a built-in antenna to increase the remote control's range (up to 150 m). |
Details |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Receiver for radio signals from remote controls. |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it disengages the opener's gear wheel so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Robus RB600 installation manual | ||
|
Installation manual for successful setup, with wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
 |
2 × | Limit stop (left + right) | ||
|
The opener switch stops are fitted to the rack and limit the gate's travel distance. |
||||
| 1 × | Installation accessories | |||
|
Opener installation components, height adjustment screws, mounting plate, anchor caps, stops for the opener sensor. |
||||
(Is this opener right for me?)
Compare with other opener kits:
| « Lower-capacity kit | Alternative kit | Higher-capacity kit » |
|---|---|---|
|
|
|
|
Gate opener features NICE ROBUS RB600
The gate opener is compact, safe and practical, making it ideal for both residential and commercial use. Impact-resistant housing, aluminium alloy body with an epoxy coating.
The gate opener is suitable for automating sliding gates weighing up to 600 kg, with a leaf length of up to 8 m. These figures apply under the conditions specified by the manufacturer, such as weather conditions, temperature variations, gate rigidity and, above all, smooth gate movement. These conditions cannot always be achieved or controlled, so we recommend using the NICE Robus RB600 gate opener ideally with gates rated at 80% of these values. See the Choosing a gate opener chapter for more information.
Very user- friendly technology BlueBUS allows to power and control up to 7 pairs of photocells using a two-core cable.
Temperature sensor adjusts the gate opener's driving force according to the climatic conditions. The gate opener also includes a thermal cut-out.
Adjustable speed,, force and pause time for automatic gate-opener closing and much more; see Programming.
Diagnostics using warning beacon.
The pinion module 4 is compatible with the rack available in our range.
Robus 600 gate opener functions "The slave unit" ensures automatic synchronisation of two motors. This means that two sliding gates moving towards each other can be automated.
The gate opener NICE Robus RB600 is an electromechanical gate opener suited to Slovakia's climatic conditions and compliant with all European safety standards.
The gate opener ROBUS RB600 in pictures
| manual release | control unit | wiring diagram |
|---|---|---|
 |
 |
 |
| Instructions for manual release > |
Programming the gate opener > |
Detailed wiring diagram > |
You can find the detailed wiring diagram and further technical information on the NICE Robus RB600 gate opener's own page, or in the manual..
Gate opener technical specifications NICE ROBUS RB600
| Speed | 0,15 - 0,31 m/s |
|---|---|
| Power supply | 230V, 50/60Hz |
| Power consumption | 515W |
| Torque | 9Nm |
| Max. torque | 18Nm |
| Max. gate weight | 600kg |
| Protection rating | IP 44 |
| Operating temperature | -20°C to +50°C |
| Insulation class | 1 |
| Rack module | 4 |
Full technical specifications on the NICE Robus RB600 gate opener's own page.
Accessories compatible with the NICE Robus RB600 gate opener
We also recommend purchasing compatible optional accessories for the gate opener, or choosing one of the pre-assembled discounted bundle:
| What | Why | Type |
|---|---|---|
| Beacon | The beacon flashes to indicate gate movement—ideal for driveways with limited visibility. It also has a built-in antenna for greater remote-control range. | - LED beacon with antenna ELDC - multifunction light WLT - wireless solar LED beacon LLW |
| Photocells | They detect obstacles while closing and stop the movement—the gate won't hit a car or anyone. | - Era Photocell Medium EPMB - Era Photocell Large EPLB - Era Photocell Slim EPSB - wireless FT210B - wireless EPMOW - solar-powered PHW |
| Transmitter | For remote gate control. | - Era One ON2E, ON3EBD, ON3ELR, ON4E, ON9E - Era Flor Flo2RE, Flo4RE - FloR Flo2R-s, Flo4R-s - Inti INTI2, INTI2Y, INTI2L, INTI2B, INTI2R, INTI2G |
| Receiver | Required for remote gate control. | - OXI - OXIBD - OXILR - Wi-Fi receiver IT4WIFI - GSM receiver GSM LITE3+, GSM SMART3, GSM PROFI3 |
| Antenna | For improved remote-control range. | - integrated into the beacon ELDC - standalone antenna ABFKIT |
| Keypad | If you forget your remote, have a lot of vehicles or visitors, or don't want to give everyone a remote or open the gate alone. | - wireless EDSWG - wired EDSB |
| Key switch | Control the gate with a key using a switch wired to the drive at any convenient location. | - surface-mounted, with a standard cylinder EKS - surface-mounted, with a European cylinder, EKSEU - flush-mounted, with a standard cylinder EKSI - flush-mounted, with a European cylinder EKSIEU |
| Card readers | Control the drive by presenting a card or key fob to the card reader. | - ERA Transponder Reader ETPB |
| Rack | Required for the drive's automation—the drive cannot move the gate without a rack. | - nylon, with steel reinforcement, 33 cm LZ-1 - nylon, with steel reinforcement, 1 m LZ-10 - nylon, with steel reinforcement, reverse, 1m LZ-15 - steel, 30x8mm, 1m LZ-3 - steel, 30x12mm, 1m LZ-5 - stainless steel, 30x10mm, 1m LZ-7 |
| Backup power supply | Keeps the gate operating in the event of a power outage. | - backup battery PS124 - solar power supply SYKCE |
Manuals and documents to download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
