Sliding gate operator kit for gates up to 1000 kg / 12 m NICE Robus RB1000 (D)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€962.02 including VAT
| Weight |
|---|
| 14 kg |
Description of Sliding gate operator kit for gates up to 1000 kg / 12 m NICE Robus RB1000 (D)
NICE Robus RB1000 operator is designed for sliding gates weighing up to 1000 kg and a passage width of up to 12 m. It has an electromechanical stop switch. The operator is non-reversible. Detailed technical specifications ». Download the manual ».
| The set includes: | NICE-RB1000-D | |||
|---|---|---|---|---|
 |
1 × | NICE Robus RB1000 operator | NICE-RB1000 | |
|
NICE Robus RB1000 electromechanical operator with RBA3R10 control unit, for gates weighing up to 1000 kg and with a gate leaf length of up to 12 m. |
Details  |
|||
 |
1 × | NICE MYGO4 remote control | NICE-MYGO4 | |
|
Four-button remote control for operating an automatic gate remotely. Use it to control four devices or send four different commands to one device. Compatible with all NICE operators using O-Code rolling-code technology (the 72-bit code allows 4.7 quadrillion combinations, making it practically impossible to compromise) and an LED indicator for the transmitted signal. |
Details |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the passage. They create an infrared beam which, when interrupted by a vehicle or pedestrian, for example, sends a signal to the operator to stop the gate or prevent it from opening. |
Details |
|||
 |
1 × | NICE ELDC LED warning light with antenna |
NICE-ELDC | |
|
NICE LED flashing ELDC warning light made from impact-resistant polycarbonate, with a built-in antenna to extend the remote control's range (up to 150 m). |
Details |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Receiver for radio signals from remote controls. |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it disengages the operator's drive gear so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Robus RB1000 installation manual | ||
|
Installation manual with illustrative wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
 |
2 × | Limit stop (left + right) | ||
|
The operator limit stops are fitted to the rack and limit the gate's travel distance. |
||||
| 1 × | Installation accessories | |||
|
Operator installation components, height adjustment screws, mounting plate, anchor caps, operator sensor stops. |
||||
(Is this operator right for me?)
Compare with other operator kits:
| « Lower-powered kit | Alternative kit | Higher-powered kit » |
|---|---|---|
|
|
|
|
Drive features NICE ROBUS RB1000
The drive is compact, safe and practical, making it ideal for both residential and commercial use. Impact-resistant housing, body made of aluminium alloy with an epoxy coating.
The drive is suitable for automating sliding gates weighing up to 1000 kg and with a leaf length of up to 12 m. These values apply under the conditions specified by the manufacturer, such as weather conditions, temperature variations, gate rigidity and, above all, smooth gate movement. These conditions cannot always be achieved or controlled, so we recommend using the NICE Robus RB1000 drive with gates at no more than 80% of these limits. See the Choosing a drive chapter for more information.
Very user- friendly technology BlueBUS allows you to power and control up to 7 pairs of photocells using a two-core cable.
The temperature sensor adjusts the drive's pulling force according to the weather conditions. The drive also features a thermal fuse.
Adjustable speed,, force and pause time for automatic drive closing, and many more; see Programming.
Diagnostics using warning beacon.
Gear module 4 is compatible with the gear rack available in our range.
Robus 1000 drive functions "The slave unit" ensures automatic synchronisation of two motors. This means that two sliding gates moving towards each other can be automated.
The NICE Robus RB1000 drive is an electromechanical operator suited to Slovakia's climate and complies with all European safety standards.
The ROBUS RB1000 drive in pictures
| manual release | control unit | wiring diagram |
|---|---|---|
 |
 |
 |
| Instructions for manual release > |
Programming the drive > |
Detailed wiring diagram > |
You can find the detailed wiring diagram and other technical information on the NICE Robus RB1000 drive's own page, or in the manual..
Drive specifications NICE ROBUS RB1000
| Speed | 0,14 - 0,28 m/s |
|---|---|
| Power supply | 230V, 50/60Hz |
| Power consumption | 450W |
| Torque | 15Nm |
| Max. torque | 27Nm |
| Max. gate weight | 1000kg |
| Protection rating | IP 44 |
| Operating temperature | -20°C to +50°C |
| Insulation class | 1 |
| Gear module | 4 |
Full technical specifications on the NICE Robus RB1000 drive's own page.
Accessories compatible with the NICE Robus RB1000 drive
We also recommend purchasing compatible optional accessories for the drive, or choosing one of our pre-assembled discounted kits:
| What | Why | Type |
|---|---|---|
| Warning beacon | The beacon flashes to indicate gate movement—ideal for exits with limited visibility. It also has a built-in antenna for a longer remote-control range. | - LED warning beacon with antenna ELDC - multifunction light WLT - wireless solar LED warning light LLW |
| Photocells | They detect an obstacle as the gate closes and stop its movement, preventing it from hitting a car or anyone nearby. | - Era Photocell Medium EPMB - Era Photocell Large EPLB - Era Photocell Slim EPSB - wireless FT210B - wireless EPMOW - solar-powered PHW |
| Transmitter | For remote gate control. |
- MYGO4 - Era One ON2E, ON3EBD, ON3ELR, ON4E, ON9E |
| Receiver | Required for remote gate control. | - OXI - OXIBD - OXILR - Wi-Fi receiver IT4WIFI - GSM receiver GSM LITE3+, GSM SMART3, GSM PROFI3 |
| Antenna | For improved remote-control range. | - integrated into the warning light ELDC - standalone antenna ABFKIT |
| Keypad | Useful if you forget your remote, if many vehicles or people need access, or if you don't want to give everyone a remote or open the gate manually. | - wireless EDSWG - wired EDSB |
| Key switch | Control the gate with a key using a switch wired to the drive at any convenient location. | - surface-mounted, with standard cylinder EKS - surface-mounted, with European cylinder EKSEU - flush-mounted, with standard cylinder EKSI - flush-mounted, with European cylinder EKSIEU |
| Card readers | Control the drive by presenting a card or key fob to the card reader. | - ERA Transponder Reader ETPB |
| Rack | Required for automating the drive—without a rack, the drive has nothing to move the gate with. | - nylon, with steel reinforcement, 33cm LZ-1 - nylon, with steel reinforcement, 1m LZ-10 - nylon, with steel reinforcement, reverse, 1m LZ-15 - steel, 30x8mm, 1m LZ-3 - steel, 30x12mm, 1m LZ-5 - stainless steel, 30x10mm, 1m LZ-7 |
| Backup power supply | Keeps the gate operating in the event of a power outage. | - backup battery PS124 - solar power supply SYKCE |
Manuals and documents for download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
