Stops for swing gates and pedestrian gates

Our range includes a variety of mechanisms and products for securely closing and securing swing gates and pedestrian gates.

Centre stops for swing gates securely anchor both gate leaves in the closed position and safely stop them at the end of their travel. They can be installed on the ground or on a post, where they catch the lower or upper part of the gate.

Lock keeps are the counterparts for locking mechanisms. They allow the gate or pedestrian gate to be closed accurately and securely with a lock.

Rubber stops cushion the impact when doors or gates are open.

Bolts and gate latches are used to hold the gate in position when closed.

Swing Gate Stops

Gate stops and strike plates

Rubber stops

Stops and strike plates by Locinox

Sets with a lock

Gate bolts, hasps, and locking bars

NEW Gate stop, galvanized, universal – right-hand or left-hand

Galvanized universal gate stop.

€ excluding VAT 12,44 € including VAT 15,30
In stock Details

Universal gate stop, right or left

Universal gate stop, right or left
for screws

€ excluding VAT 11,39 € including VAT 14,01
In stock Details

Gate stop - universal, 40x20 mm, stainless steel

Gate stop for pedestrian gates, stainless steel, universal.

€ excluding VAT 26,69 € including VAT 32,83
In stock Details

Weld-on gate stop, universal, right- or left-hand, for 40 mm profile

Universal stop for a right- or left-hand pedestrian gate
Weld-on
For a profile with a width of 40mm

€ excluding VAT 4,90 € including VAT 6,03
In stock Details

Gate stop - universal, 40x40mm, stainless steel

Gate stop for pedestrian gates, stainless steel, universal. 40x40

€ excluding VAT 27,95 € including VAT 34,38
In stock Details

Gate stop - universal, for 30x40 mm box section, galvanized

Universal galvanized stop for gate, for 30x40mm profile

€ excluding VAT 6,05 € including VAT 7,44
In stock Details

NEW Door stop, chrome-plated brass with rubber buffer

Package includes: stopper, wall plug, screw.

€ excluding VAT 4,80 € including VAT 5,90
In stock Details

Gate stop – universal, for a 40x40mm box section, galvanized

Universal galvanized gate stop for 40x40mm profile

€ excluding VAT 6,05 € including VAT 7,44
In stock Details

Gate stop – for ZE-05 electric lock, universal

Stop for electric lock ZE-05, universal, unfinished

€ excluding VAT 16,48 € including VAT 20,28
In stock Details

Round stop for setting in concrete for swing gates

Round bottom stop for concreting in

€ excluding VAT 5,10 € including VAT 6,27
In stock Details

Screw-on bottom stop for swing gates

Screw-on bottom stop in two versions: 140x160x48mm 120x100x44mm

€ excluding VAT 4,84 € including VAT 5,95
In stock Details

Screw-on bottom stop for swing gates, with a hole for the latch

Bolt-on lower stop with a hole for securing the gate

€ excluding VAT 7,45 € including VAT 9,16
In stock Details

Screw-on bottom stop for swing gates, stainless steel

Screw-on lower stop in two versions: 120x100x42mm 150x138x50mm

€ excluding VAT 10,60 € including VAT 13,03
In stock Details

Round rubber stop

Round, conical rubber gate stop, d=24mm

€ excluding VAT 0,68 € including VAT 0,83
In stock Details

Round rubber stop 2

Round, conical rubber gate stop,

€ excluding VAT 0,39 € including VAT 0,48
In stock Details

Elliptical rubber stop

Elliptical rubber gate stop, 60x25mm

€ excluding VAT 2,69 € including VAT 3,31
In stock Details

Central stop made of rubber-coated steel, 150x130x65mm

Rubber-coated central gate stop, 150x130x65mm.

€ excluding VAT 13,10 € including VAT 16,12
In stock Details

Rubber round stopper for a 7 mm hole

Round stop for holes with a diameter of 7 mm.

€ excluding VAT 0,38 € including VAT 0,46
In stock Details

Universal left/right electric lock strike cassette + electric lock 6–14 V (AC/DC), ZK-03

6-14V (AC/DC) Galvanized left/right stop cassette with ZE-05 electric lock, 260x30x30mm

€ excluding VAT 50,86 € including VAT 62,55
In stock Details

Electric lock case – lock strike, ZK-01

You can fit an electric lock into the lock case, which then serves as the lock's strike plate.

€ excluding VAT 18,40 € including VAT 22,63
In stock Details

NICE PLA13 – mechanical travel stop for Wingo and Toona swing gate operators

It is used to stop the motor in the exact position when opening or closing.

€ excluding VAT 4,43 € including VAT 5,45
In stock Details

Gate latch, galvanized

Gate or door drop bolt, 200mm, 300mm, 500mm, d=16mm

€ excluding VAT 5,72 € including VAT 7,04
In stock Details

TOP Gate bolt with spring, galvanized

Spring-loaded drop bolt for swing gates, 200 mm, d=12 mm

€ excluding VAT 5,55 € including VAT 6,83
In stock Details

Gate bolt, Zn

Various bolt sizes

€ excluding VAT 18,98 € including VAT 23,35
In stock Details

Gate stop - stainless steel

Stainless steel gate or door drop bolt, 300mm, 16mm diameter

€ excluding VAT 21,49 € including VAT 26,43
In stock Details

Gate bolt (sliding gate bolt), galvanized

Various bolt sizes

€ excluding VAT 18,40 € including VAT 22,63
In stock Details

Folding gate support leg for securing the gate, 220 mm

Folding support leg to prevent the gate from swinging.

€ excluding VAT 4,98 € including VAT 6,12
In stock Details

Folding gate support leg, 300 mm

Folding support leg to prevent the gate from swinging.

€ excluding VAT 6,23 € including VAT 7,66
In stock Details

NEW Support wheel for a swing gate, galvanised steel

Load capacity: 70 kg.

€ excluding VAT 23,65 € including VAT 29,09
In stock Details

Lever latch for 10x10 mm rod, two-point, without lock

Height 162 mm. For a 10 × 10 mm bar.

€ excluding VAT 16,68 € including VAT 20,52
In stock Details

Lever latch for 10x10mm rod, two-point, without lock, steel

Height: 170 mm. For a 10x10 mm rod

€ excluding VAT 15,47 € including VAT 19,03
In stock Details

Locking lever system for a 12 × 12 mm control rod

Lever system for closing the gate

€ excluding VAT 6,23 € including VAT 7,66
In stock Details

Lever latch for 14x14mm rod, two-point, lockable, galvanized

Height: 265 mm. For a 14 × 14 mm bar. Galvanized

€ excluding VAT 42,93 € including VAT 52,80
In stock Details

Mechanical gravity (latch) lock, ZN

Self-latching lock for swing gates

€ excluding VAT 2,70 € including VAT 3,33
In stock Details

Mechanical stop (stopper) for a swing gate

Securing for swing gates

€ excluding VAT 17,04 € including VAT 20,96
In stock Details

Mechanical end stop with locking latch for swing gates

Height-adjustable end stop with a locking latch.

€ excluding VAT 37,65 € including VAT 46,31
In stock Details

Support wheel for a swing gate, galvanised steel, load capacity 70 kg

Support wheel for swing gate, wheel load capacity 70 kg, galvanized steel

€ excluding VAT 18,27 € including VAT 22,47
In stock Details

CAIS Round snap-on rubber stop, END O

Round, conical rubber gate stop, snap-on

€ excluding VAT 1,35 € including VAT 1,66
In stock Details

CAIS Lever-operated closer for 10x30 rod KL 70

Handle with vertical movement for 10x30 rod. Left / right side

€ excluding VAT 65,33 € including VAT 80,35
In stock Details

CAIS Centre Stop for LIMIT H Swing Gates

Bolt-down bottom stop.

€ excluding VAT 22,75 € including VAT 27,98
In stock Details

Door and shutter stop with a clamp mechanism

For stopping doors with a stop

€ excluding VAT 2,68 € including VAT 3,29
In stock Details

Universal extended electric lock strike box

You can install an electric lock in the lock case, which then acts as the lock strike.

€ excluding VAT 17,36 € including VAT 21,35
In stock Details

Weld-on gate stop, universal, right- or left-hand, for 30 mm profile

Universal gate stop, right or left
Weld-on
For a 30mm-wide profile

€ excluding VAT 4,47 € including VAT 5,50
In stock Details

Gate center stop, for concrete

Heavy-duty stop for swing gates

€ excluding VAT 8,01 € including VAT 9,85
In stock Details

LOCINOX SHKM-9005 Stainless Steel Strike Plate with Stop for H-METAL, H-METAL-WB, H-COMPACT and H-WOOD Locks, for 40–60 mm Profiles, Black

Stainless steel lock strike plate with an aluminum gate stop.

€ excluding VAT 22,09 € including VAT 27,17
In stock Details

LOCINOX SHKM-ALUM Stainless steel strike plate with stop for H-METAL, H-METAL-WB, H-COMPACT, H-WOOD locks

All-stainless-steel strike plate with stop for mortise locks.

€ excluding VAT 20,32 € including VAT 24,99
In stock Details

LOCINOX Stainless Steel Strike Plate with Stop for Wooden Posts SHKW-ALUM

Stainless steel lock strike plate with a gate stop for wooden posts.

€ excluding VAT 20,32 € including VAT 24,99
In stock Details

LOCINOX Stainless Steel Stop for Mortise Locks, for 30 mm Profile, SFKI QF30

Universal stainless steel stop for mounting in a profile. For Locinox FORTYLOCK, FIFTYLOCK and SIXTYLOCK locks.

€ excluding VAT 14,24 € including VAT 17,51
In stock Details

LOCINOX Stainless Steel Stop for Mortise Locks, for 40 mm Profile, SFKI QF40

Universal stainless steel stop for mounting in a profile. For Locinox FORTYLOCK, FIFTYLOCK and SIXTYLOCK locks.

€ excluding VAT 14,24 € including VAT 17,51
In stock Details

LOCINOX Polyamide Stop for Mortise Locks, for 40 mm Profile, SFKP QF40

Universal stop for mounting on a profile. For Locinox FORTYLOCK, FIFTYLOCK and SIXTYLOCK locks.

€ excluding VAT 11,84 € including VAT 14,57
In stock Details

LOCINOX Stainless Steel Stop for Mortise Locks, for 40–60 mm Profile, SFKB QF

Universal stainless steel stop for mounting on a profile. For Locinox FORTYLOCK, FIFTYLOCK and SIXTYLOCK locks.

€ excluding VAT 29,71 € including VAT 36,54
In stock Details

LOCINOX SHKC Stainless Steel Stop for H-COMPACT Mortise Lock

Stainless steel stop for recessed installation in the profile.

€ excluding VAT 17,50 € including VAT 21,52
In stock Details

LOCINOX Stainless Steel Stop for Mortise Locks, for 40–60 mm Profile, Black, SFKO 9005QF

Stainless steel lock strike plate.
Aluminium gate stop.

€ excluding VAT 20,68 € including VAT 25,44
In stock Details

LOCINOX Stainless Steel Stop for Mortise Locks, for 40–60 mm Profiles, Silver, SFKO ALUMQF

Stainless steel lock strike plate.
Aluminium gate stop.

€ excluding VAT 18,89 € including VAT 23,23
In stock Details

Locinox stainless steel stop for mortise locks, for 40–60 mm profiles, black, SFKM 9005QF

Stainless steel lock strike plate.
Aluminium gate stop in black.

€ excluding VAT 20,85 € including VAT 25,65
In stock Details

Locinox Stainless Steel Stop for Mortise Locks, for 40–60 mm Profile, Silver, SFKM ALUMQF

Stainless steel lock keeper.
Gate stop made of aluminium, in silver.

€ excluding VAT 18,17 € including VAT 22,35
In stock Details

Universal left/right electric lock strike cassette + electric lock with stainless steel strip, 12–24 V (AC/DC), ZK-03-INOX

12-24V (AC/DC)Galvanized left/right stop box, with ZE-05-INOX electric lock. 260x30x30mm

€ excluding VAT 70,46 € including VAT 86,67
In stock Details

Print page

Stops for swing gates and pedestrian gates

Shop:

Articles:

CONTACT FORM