NICE ERA Transponder Reader ETPB – contactless card reader with BlueBUS technology
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€129.18 including VAT
| Weight |
|---|
| 0,27 kg |
Description of NICE ERA Transponder Reader ETPB – contactless card reader with BlueBUS technology
Card reader NICE ERA Transponder Reader ETPB is a device that allows only authorized persons to enter a building or operate the gate or other automation. This person is assigned a card or key fob, which sends a command to the drive when held up to the card reader. Cards are stored in the reader's memory; the card itself stores no information, so it can be used to operate any number of automation systems.
The NICE ETPB reader communicates with the drive using the BlueBUS system, connecting the reader to the control unit with just a two-core cable, for which polarity does not need to be observed. Up to four card readers can be connected to one drive. Each reader is assigned a unique address using a jumper, allowing the drive to identify each reader.
The reader can store up to 255 cards, or key fobs.
When installed correctly, the detection range is up to 4 cm.
A set number of access attempts can be programmed for a given card, for example, for visitors.
The drive can be permanently locked and subsequently unlocked again.
Easy reader programming
The ETPB reader can send two commands to the control unit:
- command 1: step-by-step
- command 2: partial opening
Simple programming mode:
1) Press the T button. The reader will beep every 30 seconds.
2) Select the next command and program it onto the card
- to program command 1: present the new card to the reader once
- to program command 2: present the new card to the reader twice
3) You can program another new card within 10 seconds of presenting the previous card
4) To exit programming mode, wait more than 10 seconds
| Reader beeps during programming | |
|---|---|
| 1 beep | Indicates that a valid card was presented to the reader |
| 2 beeps | Indicates that an invalid card was presented to the reader |
| 3 beeps | Indicates that programming was completed successfully |
| 5 beeps | Minor error; operation failed |
| 10 beeps | Indicates a programming error or fault |
Technical specifications of the NICE ERA Transponder Reader ETPB
| Description | Access control device using passive 125 kHz, 32-bit transponder cards. Reader only. |
|---|---|
| Technology |
NICE BlueBUS |
| Material | Aluminium housing |
| Connection cable length | Depending on the control unit |
| Power supply | Exclusively via the NICE BlueBUS terminal, which powers the reader and provides communication with the control unit |
| Power consumption | 2 BlueBUS units |
| Detection range | up to 4 cm |
| Magnetic induction | At a distance of 10 cm from the reader: < 2 microT |
| Memory capacity | One NICE BM1000 memory module (255 cards) |
| Protection class | Class III |
| Ingress protection rating | IP54 |
| Operating temperature | -20°C to +50°C |
| Use in acidic or salty environments, or in areas with an increased risk of explosion | No |
| Installation | Vertically on a wall or post |
| Dimensions | 70x70x26mm |
| Weight | 270g |
Manuals and documents for download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
