Drive kit for sliding gates up to 600 kg/8 m NICE Robus RB600 (C)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€943.07 including VAT
| Weight |
|---|
| 12 kg |
Description of Drive kit for sliding gates up to 600 kg/8 m NICE Robus RB600 (C)
The NICE RB600 gate operator has been replaced by a newer model NICE RBS600. See the benefits of the newer NICE RBS400 and RBS600 models.
The NICE RB600 (C) operator kit will be replaced by the NICE RBS600 (C) kit.
NICE Robus RB600 gate operator is designed for sliding gates weighing up to 600 kg and a passage width of up to 8 m. It has an electromechanical stop switch. The operator is non-reversible. Detailed technical specifications ». Download the manual ».
| The set includes: | NICE-RB600-C | |||
|---|---|---|---|---|
 |
1 × | NICE Robus RB600 gate operator | NICE-RB600 | |
|
Electromechanical NICE Robus RB600 gate operator with RBA3R10 control unit, for gates with a total weight of up to 600 kg and a leaf length of up to 8 m. |
Details  |
|||
 |
1 × | NICE Era One ON2E remote control | NICE-ON2E | |
|
Two-channel remote control from the NICE Opera family, compatible with all NICE operators using O-Code rolling code. This remote control lets you operate two NICE devices, or, with the NICE FloX2R receiver, a device from another brand. With the NICE FloX2R receiver, you can also operate a device from another brand. |
Details |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the passage. They emit an infrared beam. When the beam is interrupted, for example by a car or pedestrian, a signal is sent to the operator to stop the gate or prevent it from opening. |
Details |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Receiver for radio signals from remote controls. |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it disengages the operator's gear wheel so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Robus RB600 installation manual | ||
|
Installation manual with illustrative wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
 |
2 × | Limit stop (left + right) | ||
|
The operator switch stops are mounted on the rack and limit the gate's travel. |
||||
| 1 × | Installation accessories | |||
|
Operator installation components, height adjustment screws, mounting plate, anchor caps, and stops for the operator sensor. |
||||
(Is this operator right for me?)
Compare it with other operator sets:
| « Lower-powered set | Alternative set | Higher-powered set » |
|---|---|---|
|
|
|
|
Operator features NICE ROBUS RB600
The operator is compact, safe and practical, making it ideal for both residential and commercial use. Impact-resistant cover, aluminium alloy body with an epoxy coating.
The operator is suitable for automating sliding gates weighing up to 600 kg, with a leaf length of up to 8 m. These values apply under the conditions specified by the manufacturer, including weather conditions, temperature variations, gate stiffness and, above all, smooth gate movement. This is not always possible or controllable, so we recommend using the NICE Robus RB600 drive for gates with a level of 80% of these values. See the chapter Choosing a Drive for more information.
Very user- friendly technology BlueBUS allows and powered, and controls up to 7 pairs of photocells using a two-core cable.
Temperature sensor adjusts the drive's pulling force according to the weather conditions. The drive also includes a thermal fuse.
Adjustable speed,, force and pause time for the drive's automatic closing and much more; see Programming.
Diagnostics using warning light.
Pinion module 4 is compatible with the rack in our range.
Robus 600 drive features "The slave unit" ensures automatic synchronisation of two motors. This means two sliding gates moving towards each other can be automated.
The NICE Robus RB600 is an electromechanical drive suitable for Slovakia's climate and meets all European safety standards.
The ROBUS RB600 in pictures
| manual release | control unit | wiring diagram |
|---|---|---|
 |
 |
 |
| Instructions for manual release > |
Programming the drive > |
Detailed wiring diagram > |
For a detailed wiring diagram and more technical information, see on the NICE Robus RB600 drive's own product page, or in the manual..
Drive technical specifications NICE ROBUS RB600
| Speed | 0.15–0.31 m/s |
|---|---|
| Power supply | 230V, 50/60Hz |
| Power consumption | 515W |
| Torque | 9Nm |
| Max. torque | 18Nm |
| Max. gate weight | 600kg |
| IP rating | IP 44 |
| Operating temperature | -20°C to +50°C |
| Insulation class | 1 |
| Rack module | 4 |
Complete technical specifications on the page for the NICE Robus RB600 drive itself.
Accessories compatible with the NICE Robus RB600 drive
We also recommend purchasing compatible optional accessories for the drive, or choosing one of our ready-made at a reduced price:
| What | Why | Type |
|---|---|---|
| Warning light | The warning light flashes to indicate gate movement—ideal for driveways with limited visibility. It also has a built-in antenna for greater remote-control range. | - LED warning light with antenna ELDC - multifunction light WLT - wireless solar-powered LED warning light LLW |
| Photocells | They detect obstacles while the gate is closing and stop it, preventing the gate from hitting a car or a person. | - Era Photocell Medium EPMB - Era Photocell Large EPLB - Era Photocell Slim EPSB - wireless FT210B - wireless EPMOW - solar-powered PHW |
| Transmitter | For remote gate control. | - Era One ON2E, ON3EBD, ON3ELR, ON4E, ON9E - Era Flor Flo2RE, Flo4RE - FloR Flo2R-s, Flo4R-s - Inti INTI2, INTI2Y, INTI2L, INTI2B, INTI2R, INTI2G |
| Receiver | Required for remote gate control. | - OXI - OXIBD - OXILR - Wi-Fi receiver IT4WIFI - GSM receiver GSM LITE3+, GSM SMART3, GSM PROFI3 |
| Antenna | For improved remote control range. | - integrated into the warning light ELDC - antenna only ABFKIT |
| Keypad | If you forget your remote control, if many vehicles or people visit you, or if you don't want to give everyone a remote or open the gate manually. | - wireless EDSWG - wired EDSB |
| Key switch | Control the gate with a key using a switch wired to the drive from any location. | - surface-mounted, with a standard cylinder EKS - surface-mounted, with a European cylinder, EKSEU - flush-mounted, with a standard cylinder EKSI - flush-mounted, with a European cylinder EKSIEU |
| Card readers | Control the drives by presenting a card or key fob to the card reader. | - ERA Transponder Reader ETPB |
| Rack | Essential for automating the gate drive—the rack is what allows the drive to move the gate. | - nylon, steel-reinforced, 33 cm LZ-1 - nylon, steel-reinforced, 1 m LZ-10 - nylon, steel-reinforced, reverse profile, 1 m LZ-15 - steel, 30x8mm, 1 m LZ-3 - steel, 30x12mm, 1 m LZ-5 - stainless steel, 30x10mm, 1 m LZ-7 |
| Backup power supply | Keeps the gate operating in the event of a power failure. | - backup battery PS124 - solar power supply SYKCE |
Manuals and documents to download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
