Sliding gate operator kit for gates up to 1000kg/12m NICE Robus RB1000 (C)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€911.05 including VAT
| Weight |
|---|
| 14 kg |
Description of Sliding gate operator kit for gates up to 1000kg/12m NICE Robus RB1000 (C)
NICE Robus RB1000 gate opener is designed for sliding gates weighing up to 1000 kg and a passage width of up to 12 m. It has an electromechanical limit switch. The opener is non-reversible. Detailed technical specifications ». Download the manual ».
| The set includes: | NICE-RB1000-C | |||
|---|---|---|---|---|
 |
1 × | NICE Robus RB1000 gate opener | NICE-RB1000 | |
|
Electromechanical NICE Robus RB1000 gate opener with RBA3R10 control unit, suitable for gates weighing up to 1000 kg and with a leaf length of up to 12 m. |
Details  |
|||
 |
1 × | NICE MYGO4 remote control | NICE-MYGO4 | |
|
Four-button remote control for operating an automatic gate remotely. Use it to control four devices or send four different commands to one device. Compatible with all NICE gate openers using O-Code rolling-code technology (the 72-bit code allows 4.7 quadrillion combinations, making it virtually impossible to misuse) and featuring an LED indicator for the transmitted signal. |
Details |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the passage. They create an infrared beam that, when interrupted by a vehicle or pedestrian, for example, sends a signal to the gate opener to stop the gate or prevent it from opening. |
Details |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Receiver for radio signals from remote controls. |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it disengages the gate opener's drive gear so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Robus RB1000 installation manual | ||
|
Installation manual for successful setup, with wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
 |
2 × | Limit stop (left + right) | ||
|
The limit stops for the gate opener's switch are mounted on the rack and define the gate's travel distance. |
||||
| 1 × | Installation accessories | |||
|
Gate opener installation components, height-adjustment screws, mounting plate, anchor caps, and stops for the gate opener sensor. |
||||
(Is this gate opener right for me?)
Compare it with other gate opener kits:
| « Lower-powered kit | Alternative kit | Higher-powered kit » |
|---|---|---|
|
|
|
|
Gate opener features NICE ROBUS RB1000
The gate opener is compact, safe and practical, and is ideal for both residential and commercial use. Impact-resistant housing, with an aluminium alloy housing finished with an epoxy coating.
The drive is suitable for automating a sliding gate weighing up to 1,000 kg, with a gate leaf length of up to 12 m. These figures apply under the conditions specified by the manufacturer, including weather conditions, temperature variations, gate rigidity and, above all, smooth gate movement. These conditions cannot always be achieved or controlled, so we recommend using the NICE Robus RB1000 drive for gates operating at 80% of these limits. See the Choosing a drive chapter for more information.
A very user- friendly BlueBUS allows to power and control up to 7 pairs of photocells using a two-core cable.
The temperature sensor adjusts the drive's pulling force according to the weather conditions. The drive also includes a thermal fuse.
Adjustable speed,, force and automatic closing pause time of the drive, and much more; see Programming.
Diagnostics using a warning light.
The gear module 4 is compatible with the rack in our range.
Features of the Robus 1000 drive "The slave unit" automatically synchronises two motors. This means that two sliding gates moving towards each other can be automated.
The NICE Robus RB1000 drive is an electromechanical operator suited to the climate in Slovakia and complies with all European safety standards.
The ROBUS RB1000 in pictures
| manual release | control unit | wiring diagram |
|---|---|---|
 |
 |
 |
| Instructions for manual release > |
Programming the drive > |
Detailed wiring diagram > |
For a detailed wiring diagram and more technical information, see the NICE Robus RB1000 drive product page, or consult the manual..
Technical specifications of the NICE ROBUS RB1000 drive
| Speed | 0,14 - 0,28 m/s |
|---|---|
| Power supply | 230V, 50/60Hz |
| Power consumption | 450W |
| Torque | 15Nm |
| Max. torque | 27Nm |
| Max. gate weight | 1000kg |
| Protection rating | IP 44 |
| Operating temperature | -20°C to +50°C |
| Insulation class | 1 |
| Gear module | 4 |
Full technical specifications are available on the NICE Robus RB1000 drive product page.
Accessories compatible with the NICE Robus RB1000 drive
We also recommend purchasing compatible optional accessories for the drive, or choosing one of our pre-assembled discounted sets:
| What | Why | Type |
|---|---|---|
| Warning light | The warning light flashes while the gate is moving—ideal for exits with limited visibility. It also has a built-in antenna for increased remote-control range. | - LED warning light with antenna ELDC - multifunction light WLT - wireless solar-powered LED warning light LLW |
| Photocells | When closing, the photocells detect an obstacle and stop the gate—so it won't hit a car or a person. | - Era Photocell Medium EPMB - Era Photocell Large EPLB - Era Photocell Slim EPSB - wireless FT210B - wireless EPMOW - solar-powered PHW |
| Transmitter | For remote gate control. |
- MYGO4 - Era One ON2E, ON3EBD, ON3ELR, ON4E, ON9E |
| Receiver | Required for remote gate control. | - OXI - OXIBD - OXILR - Wi-Fi receiver IT4WIFI - GSM receiver GSM LITE3+, GSM SMART3, GSM PROFI3 |
| Antenna | For improved remote control range. | - integrated into the warning light ELDC - antenna only ABFKIT |
| Keypad | If you forget your remote control, if many vehicles or people need access, or if you do not want to give everyone a remote, you can open the gate using the keypad instead. | - wireless EDSWG - wired EDSB |
| Key switch | Operate the gate with a key using a switch connected to the drive by cable at any chosen location. | - surface-mounted, with a standard cylinder EKS - surface-mounted, with a European cylinder, EKSEU - flush-mounted, with a standard cylinder EKSI - flush-mounted, with a European cylinder EKSIEU |
| Card readers | Control the drives by presenting a card or key fob to the card reader. | - ERA Transponder Reader ETPB |
| Gear rack | Required for the drive automation itself—the drive cannot move the gate without a rack. | - nylon, steel-reinforced, 33 cm LZ-1 - nylon, steel-reinforced, 1 m LZ-10 - nylon, steel-reinforced, reverse, 1 m LZ-15 - steel, 30x8mm, 1 m LZ-3 - steel, 30x12mm, 1 m LZ-5 - stainless steel 30x10mm, 1m LZ-7 |
| Backup power supply | Keeps the gate operating in the event of a power failure. | - backup battery PS124 - solar power supply SYKCE |
Manuals and documents for download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
