Drive kit for sliding gates up to 400 kg/7 m NICE Robus RB400 (X)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
In stock
€577.56 including VAT
| Weight |
|---|
| 12 kg |
Description of Drive kit for sliding gates up to 400 kg/7 m NICE Robus RB400 (X)
The NICE RB400 operator will soon be replaced by a newer model NICE RBS400. Take a look at the advantages of the newer NICE RBS400 and RBS600 models.
NICE Robus RB400 gate opener is designed for sliding gates weighing up to 400 kg and a passage width of up to 7 m. It has an electromechanical limit switch. The opener is non-reversible. Detailed technical specifications ». Download manual ».
| The set includes: | NICE-RB400-X | |||
|---|---|---|---|---|
 |
1 × | NICE Robus RB400 gate opener | NICE-RB400 | |
|
NICE Robus RB400 electromechanical gate opener with RBA3R10 control unit, suitable for gates weighing up to 400 kg and with a leaf length of up to 7 m. |
Details  |
|||
 |
2 × | NICE Era Flor FLO2RE remote control | NICE-FLO2RE | |
|
Two-button remote control for operating a gate automatically from a distance. Use it to control two devices, or to send two different commands to one device. |
Details |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the passageway. They emit an infrared beam. If it is interrupted, for example by a car or pedestrian, a signal is sent to the opener to stop the gate or prevent it from opening. |
Details |
|||
 |
1 × | NICE ELDC LED warning light with antenna | NICE-ELDC | |
|
NICE LED flashing ELDC warning light, made of impact-resistant polycarbonate and featuring a built-in antenna to extend the remote control range (up to 150 m). |
Details |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Receiver for radio signals from remote controls. |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it is used to disengage the opener's gear so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Robus RB400 installation manual | ||
|
Installation manual with illustrative wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
 |
2 × | Limit stop (left + right) | ||
|
The limit stops for the opener switch are mounted on the rack and determine the gate's travel distance. |
||||
| 1 × | Installation accessories | |||
|
Opener installation components, height adjustment screws, mounting plate, anchor caps. |
||||
(Is this opener right for me?)
Compare it with other opener kits:
| « Lower-powered kit | Alternative kit | Higher-powered kit » |
|---|---|---|
|
No. |
|
|
Drive features NICE ROBUS RB400
The drive is compact, safe and practical, making it ideal for both residential and commercial use. Impact-resistant cover, aluminium-alloy body with an epoxy coating.
The drive is suitable for automating a sliding gate weighing up to 400 kg, with a leaf length of up to 7 m. These figures apply under the conditions specified by the manufacturer, such as weather conditions, temperature variations, gate rigidity and, above all, smooth gate movement. These conditions cannot always be achieved or controlled, so we recommend using the NICE Robus RB400 drive ideally for gates rated at 80% of these limits. See the Choosing a drive chapter for more information.
Very user- friendly technology BlueBUS allows to power and control up to 7 pairs of photocells using a two-core cable.
Temperature sensor adjusts the drive's pulling force according to the weather conditions. The drive also includes a thermal fuse.
Adjustable speed,, force and pause time for automatic closing of the drive, and much more; see Programming.
Diagnostics using warning beacon.
The gearwheel module 4 is compatible with the rack in our range.
Robus 400 drive functions "The slave unit" ensures automatic synchronisation of two motors. This means that two sliding gates moving towards each other can be automated.
The NICE Robus RB400 drive is an electromechanical operator suited to Slovakia's climate and compliant with all European safety standards.
The ROBUS RB400 in pictures
| release | control unit | wiring diagram |
|---|---|---|
 |
 |
 |
| Instructions for releasing > |
Programming the drive > |
Detailed wiring diagram > |
For the detailed wiring diagram and other technical information, see on the NICE Robus RB400 drive's own page, or in the manual..
Drive specifications NICE ROBUS RB400
| Speed | 0,18 - 0,34 m/s |
|---|---|
| Power supply | 230V, 50/60Hz |
| Power consumption | 250W |
| Torque | 6Nm |
| Max. torque | 12Nm |
| Max. gate weight | 400kg |
| Protection rating | IP 44 |
| Operating temperature | -20°C to +50°C |
| Insulation class | 1 |
| Gear module | 4 |
Complete technical specifications on the NICE Robus RB400 drive's own page.
Accessories compatible with the NICE Robus RB400 drive
We also recommend purchasing compatible optional accessories for the drive, or choosing one of our ready-made discounted sets:
| What | Why | Type |
|---|---|---|
| Beacon | The beacon flashes to signal gate movement—ideal for exits with limited visibility. It also has a built-in antenna for greater remote-control range. | - LED beacon with antenna ELDC - multifunction light WLT - wireless solar LED beacon LLW |
| Photocells | When closing, they detect an obstacle and stop the gate, preventing it from hitting a car or any people. | - Era Photocell Medium EPMB - Era Photocell Large EPLB - Era Photocell Slim EPSB - wireless FT210B - wireless EPMOW - solar-powered PHW |
| Transmitter | For remote control of the gate. | - Era One ON2E, ON3EBD, ON3ELR, ON4E, ON9E - Era Flor Flo2RE, Flo4RE - FloR Flo2R-s, Flo4R-s - Inti INTI2, INTI2Y, INTI2L, INTI2B, INTI2R, INTI2G |
| Receiver | Required for remote control of the gate. | - OXI - OXIBD - OXILR - Wi-Fi receiver IT4WIFI - GSM receiver GSM LITE3+, GSM SMART3, GSM PROFI3 |
| Antenna | For improved remote control range. | - integrated into the warning light ELDC - standalone antenna ABFKIT |
| Keypad | If you forget your remote control, or if many vehicles or people visit your property and you don't want to give everyone a remote or open the gate manually each time. | - wireless EDSWG - wired EDSB |
| Key Switch | Control the gate with a key using a switch connected to the operator by cable at any convenient location. | - surface-mounted, with a standard cylinder EKS - surface-mounted, with a European cylinder EKSEU - flush-mounted, with a standard cylinder EKSI - flush-mounted, with a European cylinder EKSIEU |
| Card Readers | Operate the gate operator by presenting a card or key fob to the card reader. | - ERA Transponder Reader ETPB |
| Rack | Essential for automating the gate operator—without a rack, the operator cannot move the gate. | - nylon, with steel reinforcement, 33 cm LZ-1 - nylon, with steel reinforcement, 1 m LZ-10 - nylon, with steel reinforcement, reverse, 1 m LZ-15 - steel, 30x8mm, 1m LZ-3 - steel, 30x12mm, 1m LZ-5 - stainless steel, 30x10mm, 1m LZ-7 |
| Backup power supply | Keeps the gate operating in the event of a power failure. | - backup battery PS124 - solar power supply SYKCE |
Manuals and documents for download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
