Drive kit for sliding gates up to 400 kg/8 m NICE Road RD400 (D)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€525.78 including VAT
| Weight |
|---|
| 8,55 kg |
Description of Drive kit for sliding gates up to 400 kg/8 m NICE Road RD400 (D)
NICE Road RD400 drive is designed for sliding gates weighing up to 400 kg and a passage width of up to 8 m (recommended maximum length 5m). It has an electromechanical stop switch. The drive is non-reversible. Detailed technical specifications ». Download the manual ».
| Set NICE-RD400-D contains: | ||||
|---|---|---|---|---|
|
1 × | NICE Road 400 Gate Opener | NICE-RD400-A | |
|
NICE electromechanical operator with RBA4R10 control unit and built-in receiver, suitable for gates weighing up to 400 kg.
|
Details 
|
|||
|
1 × | NICE Era INTI2 Remote Control | NICE-INTI2 | |
|
Remote control with two buttons for operating a gate automatically from a distance. You can use it to control two devices or send two different commands to one device. |
Details
|
|||
|
1 × | NICE ELDC LED Beacon with Antenna | NICE-ELDC | |
|
NICE LED ELDC flashing warning light made of impact-resistant polycarbonate with a built-in antenna for greater remote-control range (up to 150 m). |
Details
|
|||
|
1 × | NICE EPM photocells with conventional wiring | NICE-EPM | |
|
NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate hitting an obstacle. |
Details
|
|||
|
1 × | Installation Manual for the NICE Road 400 Gate Opener |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
2 unlocking keys
End stops
(Is this drive right for me?)
Compare with other drives:
| « Weaker kit | Alternative kit | Stronger kit » |
|---|---|---|
|
No. |
|
|
Drive features NICE Road 400
The drive is compact, safe and practical, making it ideal for both residential and commercial use. Impact-resistant cover, aluminium-alloy body with an epoxy coating.
The drive is suitable for automating a sliding gate weighing up to 400 kg with a leaf length of up to 8 m. These values apply under the conditions specified by the manufacturer, including weather conditions, temperature variations, gate rigidity and, above all, smooth gate movement. These conditions cannot always be achieved or controlled, so we recommend using the NICE Road RD400 drive for gates operating at 60% of these values. See the Drive selection chapter for more information.
The standard wiring allows you to power and control 2 pairs of photocells using a four-core cable.
The temperature sensor adjusts the drive's pulling force according to the climatic conditions.
Adjustable speed,, force and automatic closing pause time of the drive and more; see Programming.
Diagnostics using a warning beacon.
The gear wheel module 4 is compatible with the gear rack in our range.
The NICE Road RD400 is an electromechanical drive suited to the climate in Slovakia and complies with all European safety standards.
The NICE Road RD400 in pictures
| manual release | control unit | wiring diagram |
|---|---|---|
 |
 |
 |
| Instructions for manual release > |
Programming the drive > |
Detailed wiring diagram > |
You can find the detailed wiring diagram and other technical information on the NICE Road RD400 drive's product page, or in the manual..
Warning: if you do not use photocells, that's fine—the drive can also operate without photocells; you just need to terminal block connect terminals 1 and 5.
Drive technical specifications NICE Road RD400
| Speed | 0,25 m/s |
|---|---|
| Power supply | 230V, 50Hz |
| Power consumption | 210W |
| Torque | 12NM |
| Max. nominal torque | 5 |
| Max. gate weight | 400kg |
| Protection rating | IP 44 |
| Operating temperature | -20°C to +50°C |
| Insulation class | 1 |
| Gear module | 4 |
Complete technical specifications on the website NICE Road RD400 drive unit only.
Compatible accessories for the NICE Road RD400 drive unit
We also recommend purchasing compatible optional accessories for the drive unit, or choosing one of our ready-made discounted kits:
| What | Why | Type |
|---|---|---|
| Warning light | The warning light flashes to signal gate movement—ideal for exits with poor visibility. It also has a built-in antenna for greater remote control range. | - LED warning light with antenna ELDC - multifunctional LED light WLT |
| Photocells | When closing, they detect obstacles and stop the gate, preventing it from hitting a car or a person. | - photocells with conventional wiring BF - Era Photocell Medium EPM - Era Photocell Large EPL - Era Photocell Slim EPS - wireless/conventional FT210 - Era Photocell Medium Antivandal EPMA |
| Transmitter | For remote control of the gate. | - Era One ON2E, ON3EBD, ON3ELR, ON4E, ON9E - Era Flor Flo2RE, Flo4RE - FloR Flo2R-s, Flo4R-s - Inti INTI2, INTI2Y, INTI2L, INTI2B, INTI2R, INTI2G |
| Receiver | For remote control of the gate. The Road 400 drive unit already has a built-in receiver. These additional receivers are optional add-ons. |
- Wi-Fi receiver IT4WIFI - GSM receiver GSM LITE3+, GSM SMART3, GSM PROFI3 |
| Antenna | For greater remote control range. | - integrated into the warning light ELDC - standalone antenna ABFKIT |
| Keypad | If you forget your remote control, or if many vehicles or people visit and you don't want to give everyone a remote or have to open the gate manually. | - wired EDS |
| Key switch | Control the gate with a key using a switch wired to the drive unit from any location. | - surface-mounted, with a standard cylinder EKS - surface-mounted, with a European cylinder EKSEU - flush-mounted, with a standard cylinder EKSI - flush-mounted, with a European cylinder EKSIEU |
| Card readers | Operate the gate using a card or key fob held up to the card reader. | - ERA Transponder Reader ETP |
| Racking | Required for the gate opener to operate—without a rack, the opener has nothing to move the gate with. | - nylon, with steel reinforcement, 33 cm LZ-1 - nylon, with steel reinforcement, 1 m LZ-10 - nylon, with steel reinforcement, reverse profile, 1 m LZ-15 - steel, 30x8mm, 1 m LZ-3 - steel, 30x12mm, 1 m LZ-5 - stainless steel, 30x10mm, 1 m LZ-7 |
| Backup power supply | Keeps the gate operating during a power outage. | - backup battery PS124 |
Manuals and documents to download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
