Component kits for cantilever gates with a galvanized C profile (Zn)
Discounted component kits for building a sliding gate with a galvanized C-profile.
Kit for building a cantilever sliding gate with a clear opening width of 3.5 m, with a galvanized C-profile
5 m C-profile – galvanized
trolleys with 5 bearings, guide ramp, end stop, guide, end cap
In stock Details
Kit for building a cantilever sliding gate with a passage width of 4.5 m, with a galvanized C-profile
6 m C-profile – galvanized
5-bearing roller carriages, end stop, socket, guide, end cap
In stock Details
Kit for building a cantilever sliding gate with a passage width of up to 6.5 m, with a galvanized C-profile
9 m C-profile – galvanized
trolleys with 8 bearings, ramp, socket, guide, end cap
In stock Details
Kit for building a cantilever sliding gate up to 3.5 m, galvanized C-profile and drive
5 m C-profile – galvanized
trolleys with 5 bearings, end stop, socket, guide, end cap
drive, toothed rack
In stock Details
TOP Kit for building a cantilever sliding gate up to 4.5 m, galvanized C-profile and NICE Robus RBS operator
6 m C-profile – galvanized
carriages with 5 bearings, ramp, pocket, guide, end cap
drive, toothed rack
In stock Details
TOP NEW Kit for building a cantilever sliding gate up to 6.5 m, galvanized C-profile and NICE Robus RBS600 drive
9 m C-profile – galvanized
trolleys with 8 bearings, gate end stop, pocket, guide, end cap
drive, toothed rack
In stock Details
Kit for building a cantilever sliding gate with a clear opening width of up to 6.5 m, with a galvanised C-profile and 9 rollers
9 m C-profile – galvanized
trolleys with 9 bearings, end stop, receiver, guide, end cap
In stock Details
Kit for making a cantilever sliding gate with a clear opening width of 6.5 m, galvanized profile, 10 rollers
9 m C-profile – galvanized
trolleys with 10 bearings, end stop, socket, guide, end cap
In stock Details
Kit for building a cantilever gate for a passage width of 3 m, ZN 57×67×3.0
4m galvanised C-profile 57×67×3.0. 2 pcs. 9-roller trolleys. Lower guide roller. Bottom end-stop pocket. Cover Cover
€ excluding VAT 269,72 € including VAT 331,76In stock Details
Kit for building a cantilever sliding gate with a clear opening width of 8.5 m, ZN 98x98x5, 5-roller carriages
2x6m C-profile 98x98x5-ZN.
2 pcs. 5-roller gate trolleys, guide ramp, end pocket, end cap
In stock Details
Kit for a cantilever gate with a clear opening width over 8.5 m, 140x140x6 mm C-profile, galvanized, 5-wheel carriages
2x6m C-profile 140x140x6-ZN. 2 pcs. 5-roller carriages, 2 pcs. stops, 2 pcs. run-on blocks.
€ excluding VAT 1 559,40 € including VAT 1 918,06In stock Details
Set for a cantilever sliding gate with a clear opening width over 8.5 m, C-profile 140x140x6mm, galvanized, 9-wheel carriages
2x6m C-profile 140x140x6-ZN. 2 pcs. 9-roller carriages, 2 pcs. stops, 2 pcs. guide ramps.
€ excluding VAT 1 732,34 € including VAT 2 130,78In stock Details
CAIS Cantilever Sliding Gate Kit 73x61x3.5 for a 4.5 m opening width, perforated galvanized profile KIT DINO SZE 02
6 m galvanized C-profile, 2 carriages with 8 bearings, guide ramp, stop pocket, profile end cap
€ excluding VAT 335,23 € including VAT 412,33In stock Details
CAIS Cantilever kit 73x61x3,5 for a sliding gate with a passage width of 4,5m, perforated zinc-coated profile KIT ENZO SZ 03
6 m galvanized C-profile, 2 trolley assemblies with 8 bearings, end stop, stop catcher, guide, profile end cap
€ excluding VAT 367,56 € including VAT 452,10In stock Details
NEW CAIS Kit for building a cantilever sliding gate up to 4.5 m with a NICE Robus RBS400 drive, galvanized
6 m C-profile, galvanized, trolleys with 8 bearings, run-on stop, end stop, guide, end cap, Nice Robus RBS400 drive, toothed rack
€ excluding VAT 849,59 € including VAT 1 044,99In stock Details
CAIS Cantilever sliding gate kit 95x86x5 for a passage width of 4.5 m, perforated galvanized profile, KIT DEMO MZE 03
6 m galvanized C-profile, 2 carriages with 8 bearings, guide ramp, stop catcher, guide, profile end cap
€ excluding VAT 653,17 € including VAT 803,40In stock Details
NEW CAIS Kit for making a cantilever sliding gate up to 6.5 m, KIT DEMO MZE 23 with NICE Robus RBS600 drive, galvanized
6 m + 3 m galvanized C-profile, 2 trolley carriages with 8 bearings, guide ramp, end-stop pocket, guide, profile end cap, Nice Robus RBS600 drive
€ excluding VAT 1 392,30 € including VAT 1 712,53In stock Details
CAIS Self-supporting kit 95x86x5 for a sliding gate with a passage width of 6.5 m, perforated Zn profile KIT DEMO MZE 23
6m+3m Zn C-profile, 2x trolley with 8 bearings, end stop, stop catcher, guide, profile cap
€ excluding VAT 822,97 € including VAT 1 012,25In stock Details
CAIS Self-supporting kit 95x86x5 for a sliding gate with a passage width of 8 m, perforated galvanized profile
6 m + 6 m Zn-plated C-profile, 2 trolley units with 8 bearings, approach ramp, end-stop pocket, guide, profile cap
€ excluding VAT 992,78 € including VAT 1 221,12In stock Details
98x98x5 kit for building a self-supporting sliding gate for a passage width of up to 4.5 m, galvanized, 5-roller carriages
C-profile Zn 6m
5-bearing trolleys, guide ramp, pocket, end cap
In stock Details
98x98x5 kit for building a cantilever sliding gate with a passage width of up to 6.5 m, galvanized, 5-roller carriages
C-profile ZN 6m + 3m
carriages with 5 bearings, guide ramp, socket, end cap
In stock Details
98x98x5 kit for making a cantilever sliding gate with a passage width of up to 4.5 m, galvanized, 9-roller carriages
C-profile ZN 6m
carriages with 9 bearings, ramp, pocket, end cap
In stock Details
98x98x5 kit for building a self-supporting sliding gate with a passage width of up to 6.5 m, galvanized, 9-wheel roller carriages
C-profile ZN 6m + 3m
rollers with 9 bearings, end stop, pocket, end cap
In stock Details
Kit for a cantilever gate with a passage width of up to 12.5 m, C-channel 140x140x6mm, galvanized, 9-wheel carriages
3x6m C-profile 140x140x6-ZN. 2 pcs. 9-roller trolleys. 2 pcs. stops, 2 pcs. guide ramps
€ excluding VAT 2 255,93 € including VAT 2 774,79In stock Details
Kit for building a cantilever sliding gate with a passage width of 4.5 m, with a galvanized C-profile
6 m C-profile – galvanized
Carriages with 5 bearings, ramp, socket, end cap
In stock Details
Kit for building a cantilever sliding gate with a clear opening width of 3.5 m, with a galvanized C-profile
5 m C-profile – galvanized
trolleys with 5 bearings, guide ramp, end stop, guide, end cap
In stock Details
Kit for building a cantilever sliding gate for an opening up to 3.5 m wide, with a C-profile
C-profile, 5 m
5-bearing trolley, end ramp, stop, guide, end cap
In stock Details
Kit for making a cantilever sliding gate for an opening up to 4.5 m wide, with a galvanized perforated C-profile
Perforated C-profile 6 m – galvanized
Trolleys with 5 bearings, run-on guide, pocket, guide, end cap
In stock Details
Kit for making a cantilever sliding gate for an opening width of 6.5 m, with a galvanized perforated C-profile
Perforated C-profile 9 m – galvanized
Trolleys with 8 bearings, end stop, socket, guide, end cap
In stock Details
Kit for building a cantilever sliding gate with a passage width of up to 6.5 m, galvanised perforated C-profile and drive
Perforated C-profile 9 m – galvanized, trolleys with 8 bearings, end stop, pocket, guide, end cap, drive, toothed rack
€ excluding VAT 1 117,44 € including VAT 1 374,45In stock Details
