CAIS Kit for making a cantilever sliding gate up to 6.5 m, KIT DEMO MZE 23 with NICE Robus RBS600 drive, galvanized
NEW| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
In stock
€1,712.53 including VAT
| Weight |
|---|
| 134 kg |
Description of CAIS Kit for making a cantilever sliding gate up to 6.5 m, KIT DEMO MZE 23 with NICE Robus RBS600 drive, galvanized
Component kit KIT DEMO MZE 23 for building a cantilever sliding gate with a clear opening width of up to 6.5 m/625 kg. All components in the kit are galvanized.
New!
We currently have galvanized C-profile 95x86x5 in a total length of 9 metres (one piece).
This profile is available for collection only from our store in Nové Mesto nad Váhom. For more information, feel free to contact us.
| Set SADA-RBS600-CAIS-DEMO-MZE-23 contains: | ||||
|---|---|---|---|---|
|
1 × | C-profile 95x86x5mm with holes for bolting, Zn, 6m | CAIS-STAGE-MZ-6 | |
|
A guide C-profile screwed to the bottom of the gate, allowing it to run on carriages anchored in a concrete foundation. Galvanized finish.
|
Details 
|
|||
|
1 × | C-profile 95x86x5mm with screw holes, galvanized, 3m | CAIS-STAGE-MZ-3 | |
|
A guide C-profile screwed to the bottom of the gate, allowing it to run on carriages anchored in a concrete foundation. Galvanized finish.
|
Details
|
|||
|
2 × | Trolley with 8 bearing rollers | CAIS-SPEED-ME | |
|
Galvanized steel trolley with 8 metal wheels. |
Details
|
|||
|
1 × | Lower guide ramp – for C-profile 95x86x5 | CAIS-RUN-M | |
|
The bottom guide ramp for a sliding gate slides into the C-profile and is secured to it with a clamping plate. The ramp engages with the bottom stop to take the weight off the gate when it is closed. |
Details
|
|||
|
1 × | Lower end stop for C-profile 95x86x5 | CAIS-LAST-M | |
|
Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed. |
Details
|
|||
|
1 × | 95x86x5 C-profile cap | CAIS-PILOT-MN | |
|
The end cap for a sliding gate C-profile is fitted at the start and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate. |
Details
|
|||
|
1 × | C-profile cover 95x86x5 with mounting to the guide rail | CAIS-PILOT-MR | |
|
The CAIS PILOT MR end cap for the sliding gate C-profile is installed at the beginning of the guide C-profile. The end cap is attached to the CAIS RUN M gate stop. |
Details
|
|||
|
1 × | Top guide with two rollers for sliding gates | CAIS-FRM2 | |
|
Gate guide for vertical stabilization of the gate in the transverse direction. |
Details
|
|||
|
6 m | Rack with metal reinforcement | LZ-1-1 | |
|
A sliding gate with a fixed rack is moved by the drive gear via a rack-and-pinion mechanism. |
Details
|
|||
|
1 × | NICE MYGO4 - four-channel remote control | NICE-MYGO4 | |
|
NICE MYGO4 - four-channel remote control, rolling code, 433.92 MHz |
Details
|
|||
|
1 × | NICE EPMB - Era Photocell Medium - photocells with BlueBUS connection | NICE-EPMB | |
|
Safety photocells are installed on either side of the opening. They create an infrared beam which, when interrupted by a car or pedestrian, for example, sends a signal to the drive to stop the gate or prevent it from opening. |
Details
|
|||
|
1 × | NICE ELDC LED Beacon with Antenna | NICE-ELDC | |
|
NICE LED ELDC flashing warning light made of impact-resistant polycarbonate with a built-in antenna for greater remote-control range (up to 150 m). |
Details
|
|||
|
1 × | NICE Robus RBS600 standalone drive | NICE-RBS600-A | |
|
NICE Robus RBS600 gate operator for gates with a leaf weight of up to 600 kg and a leaf length of 8 m. The operator includes a built-in NICE MCU1R30 control unit with an integrated receiver.
|
Details
|
|||
|
1 × | Installation Manual for the CAIS Cantilever Kit |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
|
|
1 × | Installation manual for the NICE Robus RBS drive |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
Set of screws and rivet nuts for mounting
2x Inductive Switch
You may want to purchase a BiDi-WiFi module (optional accessory). It lets you control the gate with your phone via MyNice and use MyNice Pro to program the drive and change its supported advanced settings.
Advantages and features of the CAIS-DEMO-MZE-23 kit
- Easy to install thanks to well-thought-out details, and quick to fit by bolting the C-profile to the structure, eliminating the need to weld the C-profile.
- Mounting screws and rivet nuts are included for attaching the C-profile to the structure through the holes in the C-profile, spaced at least 400mm apart.
- The hot-dip galvanized C-profile (270g/m2), with a serial number and 100% tested with the carriages, is spot-on accurate.
- High-quality carriage bearings. The carriage wheel hubs are drilled, not laser-cut.
- Tested from -37°C to +50°C
- German steel. Japanese robots. Made in the Czech Republic.
Example of the suitability of the kit for building a CAIS-DEMO-MZE-23 cantilever sliding gate
The kit is suitable for a clear opening width of up to 6.5 m and a total gate weight of 625 kg. The following drawing shows dimensions for illustrative clear opening widths, along with suggested suitable structural profiles. The table below lists the dimensions for each clear opening width of a cantilever sliding gate.
Cross-section of the gate with carriages and guide
Original manufacturer code: CAIS KIT DEMO MZE 23 1710073
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
