Kit for building a cantilever sliding gate with a passage width of 8.5 m, ZN 98x98x5, 9-roller carriages
Zn| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
In stock
€1,219.54 including VAT
| C-channel dimensions | Weight |
|---|---|
| 98x98x5 | 185 kg |
Description of Kit for building a cantilever sliding gate with a passage width of 8.5 m, ZN 98x98x5, 9-roller carriages
A set of components of the highest quality for building a cantilever gate with highly reliable heavy-duty bearings. The entire set including two C-profiles is surface-treated – hot-dip galvanized.
Note: The SET is more cost-effective than buying the components individually . On request, we can adjust the contents of the SET and the LENGTH OF THE C-PROFILES, and deduct an appropriate discount. If you have a specific request or would like advice, contact us.
| Set SADA98-9ZN-12 contains: | ||||
|---|---|---|---|---|
|
2 × | Trolley with nine bearing rollers | V-09-9 | |
|
All-metal trolley for cantilever sliding gates weighing up to 550 kg and with a passage width of up to 8.5 m. The trolley is supplied with a mounting plate included in the price. |
Details 
|
|||
|
6+6 m | C-profile 98x98x5mm, hot-dip galvanized | CP-ZN-98-1 | |
|
A heavy-duty C-shaped guide profile welded to the underside of the gate, allowing it to run on carriages anchored in a concrete foundation. The profile has a galvanized finish. C-profiles can be joined by welding. |
Details
|
|||
|
1 × | Lower guide ramp | SN-1-98 | |
|
The guide roller is mounted at the beginning of the C-profile and runs into the lower stop mounted on the closing post, relieving the gate when closed. |
Details
|
|||
|
1 × | Lower stop, 98×98×5mm | DK-1-98 | |
|
Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed. |
Details
|
|||
|
1 × | C-profile cover cap | SK-1-98 | |
|
The end cap for the sliding gate C-profile is fitted at the beginning and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate tightened with two screws. |
Details
|
|||
Delivery KITS
All sliding gate KITS are in stock. We will deliver the KIT to you by courier directly to your address. You can pay cash on delivery (to the driver when you receive the goods) or by bank transfer in advance. Another option is to collect the kit in person in Nové Mesto nad Váhom.
Ordering KITS
You can order the KIT:
| 1. By email or phone, contact us. | |
|
2. Via the shopping cart:
|
Installing a sliding gate using the KIT components
Your sliding gate kit will come with an installation drawing showing the recommended concrete foundation dimensions and example dimensions for cantilever gates.
We would be happy to advise you on the contents of your kit or its installation. You can:
| Fill in the form | Call or write to us |
|---|---|
| Ask a salesperson for advice | Contact us. |
In the photo gallery you'll find customer projects featuring sliding gates built using our components.
Extended warranty
All metal components in this KIT are covered by the 36-month extended warranty. The warranty covers not only metal components but also nylon parts and, in particular, bearing rollers carriages, which form the basis of a cantilever gate mechanism.
All automation electronics in our store are covered by the standard warranty of 24 months.
The invoice included with your delivery serves as the warranty certificate.
KIT description for building a cantilever sliding gate
Complete KIT for building a cantilever sliding gate for a passage width of up to 8.5 m and a maximum total weight of 500 kg for the cantilever gate. The complete kit with 12 metres of C-profile is available at a special price. On request, we can supply the C-profile cut into whole-metre lengths. The C-profile can also be joined by welding on request, allowing you to achieve a passage width greater than 8.5 m.
The KIT includes load-bearing carriages for cantilever gates with nine rollers fitted with heavy-duty bearings. The carriages are supplied with mounting plates.
The kit also includes bottom stop and pickup roller, which reduce the load on the gate and also serve as stop and safety components. The parts in this KIT are selected so you don't need to buy any additional components (although you can add to the kit, for example, a upper stop).
The parts in this KIT are selected so you don't need to buy any additional components for a manually operated gate (although you can add to the kit, for example, a hook lock or upper stop). To automate the gate, you can purchase a gate operator and electronic accessories (remote controls, warning light, photocells).
C-profile is welded to the bottom gate frame. We recommend using a minimum size of 80x40x2mm for the bottom frame section, and 60x40, 80x40 or larger for the other frame sections, depending on the passage width, the total gate leaf length and the intended weight. We can advise you. The gate frame must be sturdy and stable. Once you have the gate frame, install the carriages on the concrete foundation (use steel anchors, chemical anchors, or cast the carriages directly into the foundation using threaded rods). We will send you the concrete foundation dimensions along with other recommended procedures together with the products. Alternatively, contact us, and we'll be happy to advise you.
For more detailed information about cantilever gates and the components used to assemble them, see the section Common situations when building a sliding gate.
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
