Kit for making a cantilever sliding gate up to 4.5 m wide, with NICE operator
TOP| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
| Available variant types for this product Kit for making a cantilever sliding gate up to 4.5 m wide, with NICE operator | ||
| Roller type: |
You can choose the rollers nylon or metal. Nylon rollers allow the gate to carry a heavy load, prevent wear on the C-profile and ensure quiet gate operation. |
|
|---|---|---|
|
Nylon
rollers Metal
rollers |
||
| Guide type: |
Top guide Use it if the infill of your gate (e.g. wooden slats, Lexan, expanded metal) does not extend above the gate. Anchor it to the existing fence or to an adjustment post. |
|
|
Side
guide Top
guide |
||
€1,004.86 including VAT
| C-channel dimensions | Weight |
|---|---|
| 70×70×4mm | 72 kg |
€1,052.38 including VAT
| C-channel dimensions | Weight |
|---|---|
| 80×80×5mm | 94 kg |
Description of Kit for making a cantilever sliding gate up to 4.5 m wide, with NICE operator
Available replacement!
The component set includes the NICE Robus RB400 gate operator, which is no longer manufactured and has been replaced by the newer model NICE Robus RBS400, which has several improvements. See the same set with this new gate operator.
See the benefits of the new generation of NICE RBS400 and RBS600.
Kit of components for building a cantilever sliding gate in the highest quality with highly reliable heavy-duty bearings.
Note: The KIT is more cost-effective than buying the components individually at a special price. We can customize the KIT contents on request and apply an appropriate discount. If you have a specific request or would like advice, contact us.
| The kit includes: | SADA-03 | SADA-04 | ||
|---|---|---|---|---|
 |
2 × | Five-bearing roller carriage | V-02-3 | V-02-1 |
|
Choose nylon or metal rollers. Nylon rollers support heavy gates, prevent wear on the C-profile and ensure quiet gate operation. Nylon and metal rollers are the same price |
Detail  |
|||
 |
6 m | C-profile, unfinished | CP-70-6 | CP-80-6 |
|
A heavy-wall C-shaped guide profile welded to the underside of the gate, allowing it to run on carriages anchored in a concrete foundation. Unfinished, raw steel. |
CP-70 CP-80 |
|||
 |
1 × | Bottom guide roller | SN-1-70 | SN-1-80 |
|
The guide roller is fitted to the start of the C-profile and rolls into the bottom catch mounted on the gate post, relieving the gate when it closes. |
|
|||
 |
1 × | Bottom catch | DK-1-70 | DK-1-80 |
|
An end catch mounted at the bottom of the gate post. It relieves the compressive and tensile forces acting on the carriages when the gate is closed. |
DK-1-70 DK-1-80 |
|||
 |
1 × | Gate guide | ||
|
The gate guide provides lateral stability in the vertical plane. You can choose an upper guide (1 × VVR-3-G) or a side guide (2 × BR-43G). |
Side Top |
|||
 |
1 × | Metal C-profile end cap | SK-1-70 | SK-1-80 |
|
The sliding gate C-profile end cap is fitted to the start, and optionally the end, of the guide C-profile. It slides into the C-profile and is secured with a clamping plate. |
|
|||
 |
1 × | NICE Robus 400 gate motor | NICE-RB400 | |
|
NICE Robus 400 electromechanical gate motor with an RBA3R10 control unit, suitable for gates weighing up to 400 kg. |
Detail |
|||
 |
1 × | NICE MYGO4 remote control | NICE-MYGO4 | |
|
Four-button remote control for opening a gate automatically from a distance. Use it to control four devices or send four different commands to one device. Compatible with all NICE motors using O-Code rolling-code technology (the 72-bit code allows 4.7 quadrillion combinations, making it virtually impossible to misuse) and an LED signal transmission indicator. |
Detail |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the passage opening. They generate an infrared beam which, when interrupted by a car or pedestrian, for example, sends a signal to the motor to stop the gate or prevent it from opening. |
Detail |
|||
 |
1 × | NICE ELDC LED warning light with antenna | NICE-ELDC | |
|
NICE LED flashing warning light ELDC made of impact-resistant polycarbonate, with a built-in antenna to extend the remote control's range (up to 150 m). |
Detail |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Radio signal receiver for remote controls. |
Detail |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it is used to disengage the drive gear so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Robus 400 installation manual | ||
|
Installation manual for successful setup, with wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
| 1 × | Operator installation accessories | |||
|
Components for installing the operator: height adjustment screws, mounting plate, anchor covers and stops for the operator's sensor. |
||||
 |
4 m | Toothed rack with metal reinforcement | LZ-1-4 | |
|
A sliding gate fitted with a fixed toothed rack is moved by the operator's drive gear through a rack-and-pinion mechanism. |
Detail |
|||
All metal components except C-profile are zinc-plated for surface protection. Go to the description of the KIT components.
Delivery KITS
All sliding gate KITS are in stock, and orders are dispatched within 48 hours. We will deliver the KIT to you by courier directly to your address. You can pay cash on delivery (to the driver when you receive the goods) or by bank transfer in advance. Another option is to collect the kit in person in Nové Mesto nad Váhom.
Ordering KITS
You can order a KIT:
| 1. By email or phone, contact us. | |
|
2. Using the shopping cart:
|
Sliding gate installation using KIT components
The sliding gate kit comes with an installation drawing that includes recommended concrete foundation dimensions and example dimensions for cantilever gates.
We'd be happy to advise you on the components for your kit or on installation. You can:
| Fill out the form | Call or write to us |
|---|---|
| Ask a sales representative for advice | Contact us. |
In the photo gallery you'll find customer projects featuring sliding gates built using our components.
Extended warranty
All metal components in this KIT are covered by an extended 36-month warranty. The warranty covers not only metal components but also nylon parts and in particular bearing rollers carriages, which form the basis of a cantilever gate mechanism.
All automation electronics in our store are covered by the standard warranty of 24 months.
The invoice included with your delivery serves as your warranty certificate.
Description of the KIT for building a cantilever sliding gate
Complete KIT for building a cantilever sliding gate for a clear opening width of up to 4.5m and a maximum total weight of 400 kg cantilever gate. A complete kit with a 6-metre C-profile is discounted. On request, we can supply the C-profile cut to whole-metre lengths; it can also be extended by welding to achieve a clear opening wider than 4.5 m. It can also be extended by welding to achieve a clear opening wider than 4.5 m.
THE KIT includes load-bearing trolleys for cantilever gates with five rollers fitted with heavy-duty bearings. The trolleys offer adjustment and pivoting, with adjustment used to fine-tune the gate's clearance from the ground, while the pivoting action ensures that all bearings are evenly loaded in both tension and compression. The trolleys are supplied with mounting plates.
The kit also includes bottom stop and run-in wheel, which reduce the load on the gate and also serve as stops and safety features. The components in this KIT are selected so you won't need to buy any additional parts (you can, however, add to the kit—for example, with top stop).
The kit also includes a complete set for automating a sliding gate: gate opener and electronic accessories (remote controls, warning light, photocells).
C-profile is welded to the bottom frame of the gate. 80x40x2mm, and the other frame rails 40x40, 60x40 or 80x40, depending on the clear opening, the overall gate leaf length and the intended weight. We can advise you. The gate frame must be robust and stable. Once you have the gate frame, mount the trolleys on a concrete foundation (use steel anchors, chemical anchors, or cast the trolleys directly into the foundation using threaded rods). We will send you the concrete foundation dimensions, along with other recommended instructions, together with the products. Alternatively, contact us, and we'll be happy to advise you.
In the Common situations when building a sliding gate.
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
