CAIS Cantilever kit 73x61x3,5 for a sliding gate with a passage width of 4,5m, perforated zinc-coated profile KIT ENZO SZ 03
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€452.10 including VAT
| Weight |
|---|
| 48 kg |
Description of CAIS Cantilever kit 73x61x3,5 for a sliding gate with a passage width of 4,5m, perforated zinc-coated profile KIT ENZO SZ 03
Component kit KIT ENZO SZ 03 for building a cantilever sliding gate with a clear opening width of up to 4.5 m/450 kg. All components in the kit are galvanized.
| Set CAIS-ENZO-SZ-03 contains: | ||||
|---|---|---|---|---|
|
1 × | C-profile 73x61x3,5mm with screw holes, Zn. 6m | CAIS-STAGE-SZ-6 | |
|
A guide C-profile screwed to the bottom of the gate, allowing it to run on carriages anchored in a concrete foundation. Galvanized finish.
|
Details 
|
|||
|
2 × | SPEED S trolley with eight bearing rollers | CAIS-SPEED-S | |
|
Galvanized steel trolley with 8 metal wheels. |
Details
|
|||
|
1 × | Bottom ramp – for C-profile 73x61x3.5 | CAIS-RUN-S | |
|
The bottom guide ramp for a sliding gate slides into the C-profile and is secured to it with a clamping plate. When the gate closes, the ramp engages with the bottom stop to relieve the load on the gate. |
Details
|
|||
|
1 × | Bottom end stop for C-profile 73x61x3.5 | CAIS-LAST-S | |
|
Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed. |
Details
|
|||
|
1 × | Top guide with two rollers for sliding gates | CAIS-FRS2 | |
|
Gate guide for vertical stabilization of the gate in the transverse direction. |
Details
|
|||
|
1 × | C-Profile End Cap 73x61x3.5 | CAIS-PILOT-SN | |
|
The end cap for a sliding gate C-profile is fitted at the beginning and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate. |
Details
|
|||
|
1 × | 73x61x3.5 C-profile end cap with ramp mounting | CAIS-PILOT-SR | |
|
The CAIS PILOT SR end cap for the sliding gate C-profile is installed at the beginning of the guide C-profile. The end cap attaches to the CAIS RUN S gate stop. |
Details
|
|||
|
1 × | Installation manual for a cantilever gate kit |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
Set of screws and rivet nuts for mounting
Advantages and features of the CAIS ENZO SZ 03 kit
- Easy assembly thanks to carefully designed details, and quick installation by bolting the C-profile to the structure, eliminating the need to weld the C-profile
- Fixing bolts and rivet nuts are included for attaching the C-profile to the structure through the holes in the C-profile, which are spaced at least 400 mm apart
- Hot-dip galvanized C-profile, 270 g/m2, with a serial number, 100% tested with the trolleys, and as accurate as they come.
- High-quality trolley bearings. The centers of the trolley wheels are drilled, not laser-cut
- Tested from -37°C to +50°C
- German steel. Japanese robots, made in the Czech Republic
Example of a suitable application for the CAIS ENZO SZ 03 kit for manufacturing a self-supporting sliding gate
The kit is suitable for a clear opening width of up to 4.5 m and a total gate weight of 450 kg. The following drawing shows dimensions for sample clear opening widths, along with recommended structural profiles. The table below shows the dimensions for each clear opening width of a cantilever sliding gate.
Cross-section of the gate with trolleys and guide
Preparation before installation:
Original manufacturer’s code: CAIS KIT ENZO SZ 03 1710046
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
