CAIS Cantilever Sliding Gate Kit 73x61x3.5 for a 4.5 m opening width, perforated galvanized profile KIT DINO SZE 02
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€412.33 including VAT
| Weight |
|---|
| 45 kg |
Description of CAIS Cantilever Sliding Gate Kit 73x61x3.5 for a 4.5 m opening width, perforated galvanized profile KIT DINO SZE 02
CAIS component set DINO SZE 02 for building a cantilever sliding gate with a passage width of up to 4.5 m/325kg. All components are galvanized.
| Set CAIS-DINO-SZE-02 contains: | ||||
|---|---|---|---|---|
|
1 × | C-profile 73x61x3,5mm with screw holes, Zn. 6m | CAIS-STAGE-SZ-6 | |
|
A guide C-profile screwed to the bottom of the gate, allowing it to run on carriages anchored in a concrete foundation. Galvanized finish.
|
Details 
|
|||
|
2 × | Trolley with eight bearing rollers, SPEED SE | CAIS-SPEED-SE | |
|
Galvanized steel trolley with 8 metal wheels. |
Details
|
|||
|
1 × | Bottom ramp – for C-profile 73x61x3.5 | CAIS-RUN-S | |
|
The bottom guide ramp for a sliding gate slides into the C-profile and is secured to it with a clamping plate. When the gate closes, the ramp engages with the bottom stop to relieve the load on the gate. |
Details
|
|||
|
1 × | Bottom end stop for C-profile 73x61x3.5 | CAIS-LAST-S | |
|
Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed. |
Details
|
|||
|
1 × | C-Profile End Cap 73x61x3.5 | CAIS-PILOT-SN | |
|
The end cap for a sliding gate C-profile is fitted at the beginning and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate. |
Details
|
|||
|
1 × | 73x61x3.5 C-profile end cap with ramp mounting | CAIS-PILOT-SR | |
|
The CAIS PILOT SR end cap for the sliding gate C-profile is installed at the beginning of the guide C-profile. The end cap attaches to the CAIS RUN S gate stop. |
Details
|
|||
|
1 × | Installation manual for a cantilever kit |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
Set of screws and rivet nuts for mounting
ADVANTAGES AND FEATURES OF THE CAIS DINO SZE 02 KIT
- Easy installation thanks to well-designed details, and quick fitting by screwing the C-profile to the structure, eliminating the need to weld the C-profile
- Fastening screws and rivet nuts are included for attaching the C-profile to the structure through the holes in the C-profile, spaced at least 400 mm apart
- The hot-dip galvanized C-profile (270 g/m²), with a serial number and 100% tested with the gate carriages, is accurate to a tee.
- High-quality carriage bearings. The centers of the carriage wheels are drilled, not laser-cut
- Tested from -37°C to +50°C
- German steel. Japanese robots, made in the Czech Republic
EXAMPLE OF SUITABILITY OF THE CAIS DINO SZE 02 KIT FOR MANUFACTURING A CANTILEVER SLIDING GATE
The kit is suitable for a clear opening width of up to 4.5 m and a total gate weight of 325 kg. The following drawing shows dimensions for illustrative clear opening widths, along with a proposal for suitable structural profiles. The table below lists the dimensions for each clear opening width of a cantilever sliding gate.
CROSS-SECTION OF THE GATE WITH CARRIAGES AND GUIDE:
Original manufacturer code: CAIS KIT DINO SZE 02 1710049
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
