Drive kit for sliding gates up to 1000kg/12m NICE Robus RB1000 (F)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€1,010.76 including VAT
| Weight |
|---|
| 21 kg |
Description of Drive kit for sliding gates up to 1000kg/12m NICE Robus RB1000 (F)
NICE Robus RB1000 gate operator is designed for sliding gates weighing up to 1000 kg and a passage width of up to 12 m. It has an electromechanical stop switch. The operator is non-reversible. Detailed technical specifications ». Download the manual ».
| The set includes: | NICE-RB1000-F | |||
|---|---|---|---|---|
 |
1 × | NICE Robus RB1000 gate operator | NICE-RB1000 | |
|
NICE Robus RB1000 electromechanical gate operator with RBA3R10 control unit, for gates weighing up to 1000 kg and with a leaf length of up to 12m. |
Details  |
|||
 |
1 × | NICE MYGO4 remote control | NICE-MYGO4 | |
|
Four-button remote control for operating an automatic gate remotely. Use it to control four devices, or to send four different commands to one device. Compatible with all NICE operators featuring O-Code rolling-code technology (the 72-bit code allows 4.7 quadrillion combinations, making it virtually impossible to misuse) and an LED indicator for transmitted signals. |
Details |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the passageway. They create an infrared beam which, when interrupted by a vehicle or pedestrian, for example, sends a signal to the operator to stop the gate or prevent it from opening. |
Details |
|||
 |
1 × | NICE ELDC LED warning light with antenna | NICE-ELDC | |
|
NICE LED flashing ELDC warning light, made of impact-resistant polycarbonate and featuring a built-in antenna to extend the remote control's range (up to 150 m). |
Details |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Radio signal receiver for remote controls. |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it disengages the operator's drive gear so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Robus RB1000 installation manual | ||
|
Installation manual with illustrative wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
 |
2 × | Limit stop (left + right) | ||
|
The operator limit stops are mounted on the toothed rack and limit the gate's travel. |
||||
| 1 × | Installation accessories | |||
|
Operator installation components, height adjustment screws, mounting plate, anchor caps, and limit stops for the operator sensor. |
||||
 |
4 m | Toothed rack with metal reinforcement | LZ-1-4 | |
|
A sliding gate with a rack mounted directly to it is moved by the operator's gear via the rack-and-pinion mechanism. |
Details |
|||
(Is this operator right for me?)
Compare with other operator kits:
| « Lower-powered kit | Alternative kit | Higher-powered kit » |
|---|---|---|
|
|
|
|
Gate opener features NICE ROBUS RB1000
The gate opener is compact, safe and practical, ideal for both residential and commercial use. Impact-resistant cover, housing made of epoxy-coated aluminium alloy.
The gate opener is suitable for automating sliding gates weighing up to 1000 kg with a leaf length of 12 m. These values apply under the conditions specified by the manufacturer, such as weather conditions, temperature variations, gate rigidity and, above all, smooth gate movement. These conditions cannot always be achieved or controlled, so we recommend using the NICE Robus RB1000 gate opener with gates operating at no more than 80% of these values. See the Choosing a gate opener chapter for more information.
Highly user- friendly technology BlueBUS allows to power and control up to 7 pairs of photocells using a two-core cable.
Temperature sensor adjusts the gate opener's driving force according to weather conditions. The gate opener also includes a thermal fuse.
Adjustable speed,, force and pause time for automatic gate closing, and much more; see Programming.
Diagnostics using warning light.
The gear module 4 is compatible with the gear rack available in our range.
Robus 1000 gate opener functions "The slave unit" ensures automatic synchronisation of two motors. This means that two sliding gates moving towards each other can be automated.
The NICE Robus RB1000 is an electromechanical gate opener suited to the climate in Slovakia and complies with all European safety standards.
Gate opener ROBUS RB1000 in pictures
| release | control unit | wiring diagram |
|---|---|---|
 |
 |
 |
| Instructions for manual release > |
Programming the gate opener > |
Detailed wiring diagram > |
You can find the detailed wiring diagram and more technical information on the NICE Robus RB1000 gate opener's own page, or in the manual..
Gate opener technical specifications NICE ROBUS RB1000
| Speed | 0.14 - 0.28 m/s |
|---|---|
| Power supply | 230V, 50/60Hz |
| Power consumption | 450W |
| Torque | 15Nm |
| Max. torque | 27Nm |
| Max. gate weight | 1000kg |
| Protection rating | IP 44 |
| Operating temperature | -20°C to +50°C |
| Insulation class | 1 |
| Gear module | 4 |
Full technical specifications on the NICE Robus RB1000 gate opener's own page.
Accessories compatible with the NICE Robus RB1000 gate opener
We also recommend purchasing compatible optional accessories for the gate opener, or choosing one of our pre-assembled discounted kit:
| What | Why | Type |
|---|---|---|
| Warning light | The warning light signals gate movement by flashing—ideal for driveways with poor visibility. It also has a built-in antenna for greater remote-control range. | - LED warning light with antenna ELDC - multifunctional light WLT - wireless solar-powered LED warning light LLW |
| Photocells | When closing, they detect an obstacle and stop the gate, preventing it from hitting a car or a person. | - Era Photocell Medium EPMB - Era Photocell Large EPLB - Era Photocell Slim EPSB - wireless FT210B - wireless EPMOW - solar-powered PHW |
| Transmitter | For remote control of the gate. |
- MYGO4 - Era One ON2E, ON3EBD, ON3ELR, ON4E, ON9E |
| Receiver | Required for remote control of the gate. | - OXI - OXIBD - OXILR - Wi-Fi receiver IT4WIFI - GSM receiver GSM LITE3+, GSM SMART3, GSM PROFI3 |
| Antenna | For greater remote-control range. | - integrated into the warning light ELDC - standalone antenna ABFKIT |
| Keypad | Useful if you forget your remote control, have a lot of vehicles or visitors, or don't want to give everyone a remote or open the gate manually. | - wireless EDSWG - wired EDSB |
| Key switch | Control the gate with a key using a switch connected to the drive by cable, wherever you choose to install it. | - surface-mounted, with a standard cylinder EKS - surface-mounted, with a European cylinder EKSEU - recessed, with a standard cylinder EKSI - recessed, with a European cylinder EKSIEU |
| Card readers | Operate the gate drive by holding a card or key fob up to the card reader. | - ERA Transponder Reader ETPB |
| Toothing | Required for the drive automation itself — without a rack, the drive has nothing to move the gate with. | - nylon, with steel reinforcement, 33 cm LZ-1 - nylon, with steel reinforcement, 1 m LZ-10 - nylon, with steel reinforcement, reverse, 1 m LZ-15 - steel, 30x8mm, 1 m LZ-3 - steel, 30x12mm, 1 m LZ-5 - stainless steel, 30x10mm, 1 m LZ-7 |
| Backup power supply | Keeps the gate operating in the event of a power outage. | - backup battery PS124 - solar power supply SYKCE |
Manuals and documents to download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
