NICE Wingo 3524 drive kit for a double-leaf gate – one leaf 3.5 m/500 kg
TOP| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€747.90 including VAT
| Weight |
|---|
| 19 kg |
Description of NICE Wingo 3524 drive kit for a double-leaf gate – one leaf 3.5 m/500 kg
Drive NICE Wingo WG3524 is designed for automating swing gates up to leaf length 3.5 m and weight up to 500 kg. The drive is based on 24V and features PLA13 mechanical opening stop. The drive is non-reversible. The Wingo operators offer good value for money for automating swing gates in residential and light industrial settings. The entire Wingo range is reliable and quiet. Detailed technical specifications ». Download the manual ». NICE Wingo WG3524 comes with a new control unit MC424LR30 which incorporates the control board MCA2R30 with a built-in receiver; the receiver socket is still available if you want to use an older receiver with your remotes already programmed.
| The set includes: | NICE-WG3524B2 | |||
|---|---|---|---|---|
 |
2 × | NICE Wingo WG3524 operator | NICE-WG3524 | |
|
NICE Wingo WG3524 electromechanical operator, suitable for gate leaves weighing up to 500 kg and measuring up to 3.5 m long. |
Details  |
|||
 |
1 × | NICE MC424LR30 control unit | NICE-MC424LR30 | |
|
The control unit in the stylish Moonclever enclosure incorporates the MCA2R30 with a built-in receiver, to which the operators and accessories are connected, is an essential part of the automation system. |
Details |
|||
 |
1 × | NICE Era INTI2 remote control | NICE-INTI2 | |
|
A two-button remote control for operating a gate automatically from a distance. Use it to control two devices or to send two different commands to one device. |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it releases the operator so the gate can be moved manually by pushing or pulling it. |
||||
 |
1 × | NICE Wingo WG3524 installation manual | ||
|
Installation manual for successful setup, with wiring diagrams and instructions for programming and pairing remotes. |
Download |
|||
| 1 × | Installation accessories | |||
|
Components for installing the operator: front and rear brackets for welding. |
||||
(Is this operator right for me?)
Compare with other operators:
| « Lower-powered set | Alternative operator | Higher-powered set » | |||||
|---|---|---|---|---|---|---|---|
|
NICE Wingo WG2024 operator set
|
NICE Wingo 230V operator:
Quote and delivery available on request. |
NICE Toona 4 TO4024 operator set
|
OPERATOR FEATURES NICE WINGO WG3524
The operator features a two-piece housing made of die-cast aluminium with a polyester finish resistant to atmospheric conditions. All internal moving parts are made of steel, light alloys and technopolymers. The lead nut is made of bronze to ensure strength and quiet operation. The starting capacitor is housed inside the operator to make installation as easy as possible. The operators are dimensionally backward-compatible with the previous Moby and Pluto series from the Italian manufacturer NICE; all mounting dimensions and pin diameters are the same. The operator uses 24V, making it more suitable for situations involving more frequent use than the 230V version. However, it is not suitable for windy locations, especially with opaque, solid gate infills.
Control unit MCA2R30 in the control panel MC424LR30 allows simple programming, automatic detection of limit positions, automatic fault diagnosis, setting the pause duration in automatic closing mode, pedestrian opening, deceleration before reaching the end positions, obstacle impact detection, and emergency operation when used with the PS124 backup power supply, using the connection cable CABLA11, input for all types of safety edges, and much more.
ACCESSORIES COMPATIBLE WITH THE NICE WINGO WG3524 OPERATOR
We also recommend purchasing these optional accessories compatible with the operator:
| What | Why | Type |
|---|---|---|
| Control panel | Operator control electronics. Includes a built-in control unit. Conventional wiring system. |
|
| Flashing beacon | Flashes to indicate gate movement—ideal for driveways with poor visibility. Also includes an antenna for greater remote-control range. |
Alternatively, any beacons with a 12V–24V power supply from other manufacturers. |
| Photocells | They detect obstacles while the gate is closing and stop it, preventing it from hitting vehicles or people. | |
| Transmitter | For remote control of the gate. | |
| Receiver |
For remote control of the gate. The control unit MCA2R30 already has a built-in receiver. These additional receivers are optional. |
|
| Antenna |
For better remote-control range. |
|
| Keypad |
If you forget your remote control, or if many vehicles or people need access and you don't want to give everyone a remote or open the gate manually. |
|
| Key switch |
Operate the gate with a key using a switch connected to the operator by cable, wherever needed. |
|
| Card readers |
Operate the gate operator by presenting a card or key fob to the card reader. |
|
| Electric locks |
Safety electric locks are synchronized with the operator via the control unit. When an operator command is issued, the electric lock unlocks first, and only then does the gate begin to open. The lock engages again once the gate has closed. Required for gate leaves longer than 3.5 m. |
|
| Backup power supply |
Backup power supply. |
NICE WINGO WG3524 OPERATOR MANUAL
NICE operator manual Wingo WG3524 download here:
NICE Wingo WG3524 operator manual
NICE Wingo operator photo gallery
|
Installation example |
Installation example |
Installation example |
|
Installation example |
Installation example |
Installation example |
|
Installation example
|
Actuator released |
Actuator with cover removed |
|
Rear view from below |
Worm screw and internal mechanical stop |
Front view from below |
|
Rear view with cable connected |
Technical specifications
| Detailed technical specifications of NICE Wingo WG3524 actuators > | Detailed technical specifications of the NICE Moonclever MC424LR30 control unit > |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
