NICE CABLA11 - cable adapter for PS124 and PS324 backup power supplies, for R30 control units
NEW| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€14.68 including VAT
| Weight |
|---|
| 1,00 kg |
Description of NICE CABLA11 - cable adapter for PS124 and PS324 backup power supplies, for R30 control units
The CABLA11 adapter is used to connect a backup battery PS124 or PS324 to an R30-version control unit.
If you are using an older battery type (PS124/PS324), standby mode must be disabled in the control panel because the older battery is not compatible with energy-saving mode. In this case, average energy consumption will also increase.
Using the CABLA11 adapter, the backup power supply PS124 can also be connected to the latest-generation NICE Robus operators - NICE Robus RBS (Robus RBS400, Robus RBS600, Robus RBS600HS).
Installing the backup battery NICE PS124
- Disconnect the operator from the mains power supply.
- Connect the battery to the operator.
The connectors for connecting to the operator are not polarized, so their orientation does not matter when plugging them in.
The CABLA11 adapter is equipped with two connectors. One connector is narrower and the other is wider. Use the wider connector to connect to the operator and the narrower connector to connect to the battery.
How to connect to the NICE Robus operator:
How to connect to the NICE Robus RBS operator:
| 1. Pry off the plastic cover over the battery connector on the operator. | 2. Plug the cable's wider connector into the connector on the operator. Connect the cable's narrower connector to the battery. |
|---|---|
![]() |
![]() |
| 3. Place the battery in the backup power supply compartment inside the operator housing. |
|---|
![]() |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]




