NICE Wingo 3524 drive kit for double-leaf gates – one leaf 3.5 m/500 kg, with photocells
TOP| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€809.03 including VAT
| Weight |
|---|
| 19 kg |
Description of NICE Wingo 3524 drive kit for double-leaf gates – one leaf 3.5 m/500 kg, with photocells
Drive NICE Wingo WG3524 is designed for automating swing gates up to leaf length 3.5 m and weight up to 500 kg. The drive is based on 24V and has PLA13 mechanical opening stop. The drive is non-reversible. The Wingo is a sensible choice in terms of value for money for automating swing gates in private and light industrial settings. The entire Wingo family is reliable and quiet. Detailed technical specifications ». Download the manual ». NICE Wingo WG3524 includes a new control unit MC424LR30 which incorporates a control board MCA2R30 with a built-in receiver, the slot for inserting a receiver has been retained in case you want to use an older receiver that has your remote controls programmed into it.
| The kit includes: | NICE-WG3524BZ2 | |||
|---|---|---|---|---|
 |
2 × | NICE Wingo WG3524 operator | NICE-WG3524 | |
|
NICE Wingo WG3524 electromechanical operator, suitable for gate leaves weighing up to 500 kg and measuring up to 3.5 m long. |
Details | |||
 |
1 × | NICE MC424LR30 control unit | NICE-MC424LR30 | |
|
The control unit in the Moonclever designer enclosure incorporates a MCA2R30 with a built-in receiver, to which the operators and accessories are connected, is an essential part of the automation system. |
Details  |
|||
 |
1 × | NICE Era INTI2 remote control | NICE-INTI2 | |
|
Two-button remote control for operating a gate automatically from a distance. You can use it to control two devices, or send two different commands to one device. |
Details |
|||
 |
1 × | Pair of NICE EPM photocells | NICE-EPM | |
|
NICE EPM outdoor safety photocells are installed facing each other across the gate opening, or at any point where there is a risk of the gate striking an obstacle. |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, use it to release the operator so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Wingo WG3524 installation manual | ||
|
Installation manual with wiring diagrams, programming instructions and remote-control pairing instructions for successful installation. |
Download |
|||
| 1 × | Installation accessories | |||
|
Operator installation components: front and rear brackets for welding, |
||||
(Is this operator right for me?)
Compare with other operators:
| « Lower-powered kit | Alternative operator | Higher-powered kit » | |||||
|---|---|---|---|---|---|---|---|
|
NICE Wingo WG2024 operator kit
|
230V NICE Wingo operator:
Quote and delivery available on request. |
NICE Toona 4 TO4024 gate opener kit
|
GATE OPERATOR FEATURES NICE WINGO WG3524
The operator is made from a two-piece die-cast aluminium housing with a polyester coating that resists weathering. All internal moving parts are made of steel, light alloys and technopolymers. The drive nut is made of bronze to ensure strength and quiet operation. The start capacitor is housed inside the operator to make installation as simple as possible. The operators are dimensionally backward-compatible with the previous Moby and Pluto series from the Italian manufacturer NICE; all mounting dimensions and pin diameters are the same. The operator uses 24V, making it better suited to situations with more frequent use than the 230V version, but it is not suitable for windy locations, especially with opaque, solid gate infills.
Control unit MCA2R30 in the control panel MC424LR30 allows easy programming, automatic detection of end positions, automatic fault diagnostics, adjustable pause time in automatic closing mode, pedestrian passage, slowdown before end positions, obstacle impact detection, and emergency operation when using PS124 backup power supply, with the connecting cable CABLA11, input for all types of safety edge, and much more.
ACCESSORIES COMPATIBLE WITH THE NICE WINGO WG3524 GATE OPERATOR
We also recommend purchasing these optional accessories compatible with the operator:
| What | Why | Type |
|---|---|---|
| Control panel | Operator control electronics. Includes a built-in control unit. Traditional wiring system. |
|
| Warning light | Flashes to indicate gate movement—ideal for exits with poor visibility. Also includes an antenna for greater remote-control range. |
Alternatively, any warning lights with a 12V-24V power supply from other manufacturers. |
| Photocells | Detect an obstacle while the gate is closing and stop its movement—the gate will not hit a car or a person. | |
| Transmitter | For remote control of the gate. | |
| Receiver |
For remote control of the gate. In the control unit MCA2R30 the receiver is already built in. These additional receivers are optional accessories. |
|
| Antenna |
For better remote-control range. |
|
| Keypad |
Useful if you forget your remote, if many vehicles or people visit your property and you don't want to give everyone a remote, or if you don't want to go outside to open the gate. |
|
| Key switch |
Operate the gate with a key using a switch wired to the drive from any convenient location. |
|
| Card readers |
Operate the drive by presenting a card or key fob to the card reader. |
|
| Electric locks |
The safety electric locks are synchronised with the drive via the control unit. When a command is sent to the drive, the electric lock unlocks first and the gate then begins to open. The lock engages again once the gate has closed. Required for gate leaves longer than 3.5 m. |
|
| Backup power supply |
Backup power source. |
NICE WINGO WG3524 DRIVE MANUAL
NICE drive manual Wingo WG3524 download here:
NICE Wingo WG3524 drive manual
NICE Wingo drive photo gallery
|
Installation example |
Installation example |
Installation example |
|
Installation example |
Installation example |
Installation example |
|
Installation example
|
Operator in manual release mode |
Operator with cover removed |
|
Rear view from below |
Worm screw and internal mechanical stop |
Front view from below |
|
Rear view with cable connected |
Technical specifications
| Detailed technical specifications for NICE Wingo WG3524 operators > | Detailed technical specifications for the NICE Moonclever MC424LR30 control unit > |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
