NICE Wingo 2024 gate operator kit for double-leaf gates – one leaf up to 2 m/400 kg, with photocells
TOP| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€708.29 including VAT
| Weight |
|---|
| 17 kg |
Description of NICE Wingo 2024 gate operator kit for double-leaf gates – one leaf up to 2 m/400 kg, with photocells
Gate operator NICE Wingo WG2024 is designed for automating swing gates with a leaf length of 2 m and a weight of up to 400 kg. The operator is based on 24V and features PLA13 mechanical opening stop. The operator is non-reversible. The Wingo operators offer good value for money for automating swing gates in residential and light industrial settings. The entire Wingo range is reliable and quiet. Detailed technical specifications ». Download the manual ». NICE Wingo WG2024 features a new control unit MC424LR30 which includes the MCA2R30 with a built-in receiver; the receiver slot is still available if you want to use an older receiver with your remotes programmed into it.
| The kit includes: | NICE-WG2024BZ2 | |||
|---|---|---|---|---|
 |
2 × | NICE Wingo WG2024 operator | NICE-WG2024 | |
|
NICE Wingo WG2024 electromechanical operator, suitable for gate leaves weighing up to 400 kg and measuring up to 2m in length. |
Details  |
|||
 |
1 × | NICE MC424LR30 control unit | NICE-MC424LR30 | |
|
The control unit in the stylish Moonclever enclosure includes the MCA2R30 control board with a built-in receiver, to which the operators and accessories are connected, is an essential part of the automation system. |
Details |
|||
 |
1 × | NICE Era INTI2 remote control | NICE-INTI2 | |
|
Two-button remote control for operating the gate automatically from a distance. Use it to control two devices or send two different commands to one device. |
Details |
|||
 |
1 × | Pair of NICE EPM photocells | NICE-EPM | |
|
NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate hitting an obstacle. |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power outage, use it to release the operator so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Wingo WG2024 installation manual | ||
|
Installation manual for easy setup, with wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
| 1 × | Mounting accessories | |||
|
Operator mounting components: front and rear brackets for welding. |
||||
(Is this operator right for me?)
Compare with other operators:
| « Lower-power kit | Alternative operator | Higher-power kit » | |||||
|---|---|---|---|---|---|---|---|
|
It is not.
|
230V NICE Wingo operator:
Quote and delivery available on request. |
NICE Wingo WG3524 operator kit
|
DRIVE FEATURES NICE WINGO WG2024
The drive is made with a two-piece die-cast aluminium housing and a polyester finish that resists the elements. All internal moving parts are made of steel, light alloys and technopolymers. The drive nut is made of bronze to ensure high strength and quiet operation. The starting capacitor is housed inside the drive to make installation as easy as possible. The drives are dimensionally compatible with the previous range Moby and Pluto from the Italian manufacturer NICE; all mounting dimensions and pin diameters are the same. The drive uses 24V, making it more suitable for situations involving more frequent use than the 230V version; however, it is not suitable for windy locations, especially with solid, opaque gate infills. version.
Control unit MCA2R30 in the control panel MC424LR30 allows easy programming, automatic learning of limit positions, automatic fault diagnostics, setting the pause time in automatic closing mode, pedestrian passage, deceleration before the end positions, obstacle impact detection, and emergency operation when used with the PS124 backup power supply, an input for all types of safety edge, and much more.
ACCESSORIES COMPATIBLE WITH THE NICE WINGO WG2024 DRIVE
We also recommend purchasing these optional accessories compatible with the drive:
| What | Why | Type |
|---|---|---|
| Control panel | Drive control electronics. |
|
| Warning light | Flashes to indicate gate movement—ideal for driveways with poor visibility. Also includes an antenna for greater remote-control range. |
Alternatively, any warning lights with a 12V–24V power supply from other manufacturers. |
| Photo cells | They detect obstacles while the gate is closing and stop it, preventing it from hitting vehicles or people. | |
| Transmitter | For remote control of the gate. | |
| Receiver |
For remote control of the gate. The control unit MCA2R30 already has a built-in receiver. These additional receivers are optional extras. |
|
| Antenna |
For better remote-control range. |
|
| Keypad |
If you forget your remote control, or if many vehicles or people visit your property and you don't want to give everyone a remote or open the gate yourself. |
|
| Key switch |
Operate the gate with a key using a switch connected to the drive by cable at any convenient location. |
|
| Card readers |
Operate the drive by presenting a card or key fob to the card reader. |
|
| Electric locks |
The safety electric locks are synchronized with the drive via the control unit. When a command is sent to the drive, the electric lock unlocks first, and only then does the gate start to open. The lock engages again once the gate has closed. Required for gate leaves longer than 3.5 m. |
|
| Backup power supply |
Backup power source. |
NICE WINGO WG2024 DRIVE MANUAL
NICE drive manual Wingo WG2024 download here:
NICE Wingo WG2024 drive manual
| Wingo WG2024 drive: | MC424LR10 and MC424LR30 control units |
|---|---|
| What is included with the drive itself?… | Setup and installation…, Wiring… |
| Compatible accessories in detail… | Connecting the control unit… |
| Drive installation… | Photocells…, |
| Technical specifications… | Starting up the control unit…, LED diagnostics |
| Instructions for manual release… | Technical specifications… |
NICE Wingo drive photo gallery
|
Installation example |
Installation example |
Installation example |
|
Installation example |
Installation example |
Installation example |
|
Installation example
|
Unlocked drive |
Drive with cover removed |
|
Rear view from below |
Worm screw and mechanical internal stop |
Front view from below |
|
Rear view with cable connected |
|
Technical specifications
| Detailed technical specifications of NICE Wingo WG2024 > | Detailed technical specifications of the NICE Moonclever MC424LR10 control unit > |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
