NICE L-Fab LFAB4000 Drive Kit for a Single-Leaf Gate up to 4 m/650 kg


Product availability: Up to 6 weeks

The goods will be with you within 6 weeks. This lead time may be significantly shorter, so it’s best to check the current delivery time.

NICE L-Fab LFAB4000 Drive Kit for a Single-Leaf Gate up to 4 m/650 kg NICE L-Fab LFAB4000 Drive Kit for a Single-Leaf Gate up to 4 m/650 kg
NICE-LFAB4000-BE1
Up to 6 weeks
€1,041.44 excluding VAT
€1,280.97 including VAT

 pcs
Weight
17 kg

Description of NICE L-Fab LFAB4000 Drive Kit for a Single-Leaf Gate up to 4 m/650 kg

The kit comes with a non-reversible electromechanical 230V motor and is designed for a single-leaf gate with a leaf length of up to 4m and a leaf weight of 650kg.

A new underground gate operator designed primarily for entrances, passageways, wrought-iron gates, and similar applications. Its advantages include quiet operation and an unobtrusive design.. 

The operator itself also serves as the gate’s lower hinge.

Set NICE-LFAB4000-BE1 contains:
NICE L-Fab4000 underground gate operator 1 × NICE L-Fab4000 underground gate operator NICE-LFAB4000

NICE L-Fab4000 – underground operator for a swing gate leaf up to 4 m/650 kg

 Details
Foundation box for LFAB underground gate openers 1 × Foundation box for LFAB underground gate openers NICE-LFABBOX4

NICE LFABBOX4 foundation box for NICE L-Fab 4000/4024 underground gate operator. Steel with a cataphoresis coating.

 Details
NICE BMA3 release system 1 × NICE BMA3 release system NICE-BMA3

Lever release with key

 Details
NICE MC800 Control Unit 1 × NICE MC800 Control Unit NICE-MC800

The control unit in a designer enclosure, which contains the MCA5 control board to which the drives and accessories are connected, is part of the automation system.

 Details
NICE MYGO4 - four-channel remote control 1 × NICE MYGO4 - four-channel remote control NICE-MYGO4

NICE MYGO4 - four-channel remote control, rolling code, 433.92 MHz

 Details
NICE OXIBD remote control receiver 1 × NICE OXIBD remote control receiver NICE-OXIBD

Radio signal receiver for remote controls. Supports two-way communication with selected remote control models. Range of up to 200m with an antenna.

 Details
NICE EPM photocells with conventional wiring 1 × NICE EPM photocells with conventional wiring NICE-EPM

NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate hitting an obstacle.

 Details
NICE ELAC LED beacon with antenna 1 × NICE ELAC LED beacon with antenna NICE-ELAC

NICE LED flashing warning light ELAC, made of impact-resistant polycarbonate, with a built-in antenna for increased remote-control range (up to 150 m).

 Details
Installation Manual 1 × Installation Manual Download 

Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls.

Compatible accessories

We also recommend purchasing the following compatible optional accessories for the opener:

What Why Type
Control unit

The opener's control electronics.
Warning light Flashes to indicate gate movement—ideal for exits with limited visibility. Also includes an antenna for increased remote-control range.
  • LED warning light with antenna ELAC

Alternatively, all warning lights with a 230V power supply, including those from other manufacturers.
Photocells

They detect obstacles while the gate is closing and stop it, preventing it from hitting vehicles or people.

Control unit MC800 supports connecting multiple pairs of both relay-type and BlueBus photocells, but they cannot be mixed; all pairs must be the same type. However, they cannot be mixed; all pairs must be the same type.
  • Wired relay type – EPM
  • Reflective relay type – EPMOR
  • Vandal-resistant wired relay type – EPMA
  • Wired BlueBus type – EPMB, EPLB, EPSB
  • Reflective BlueBus type – EPMORB
  • Wireless BlueBus type – EPMOW
  • Adjustable wired BlueBus type – F210B
  • Wireless BlueBus type – FT210B
  • Wired BlueBus type – EPMOB
Transmitter For remote gate operation.
Receiver

For remote gate operation.

Antenna

For increased remote-control range.
  •  integrated into the warning light ELDC
  • standalone antenna ABFKIT
Keypad

If you forget your remote control, or if many vehicles or people visit and you don't want to give each of them a remote or open the gate manually.
Key switch

For operating the gate with a key using a switch wired to the opener at any convenient location.
  • surface-mounted, with a standard cylinder EKS
  • surface-mounted, with a European cylinder, EKSEU
  • recessed, with a standard cylinder EKSI
  • recessed, with a European cylinder EKSIEU
Card readers

Control the operator by presenting a card or key fob to the card reader.
  • ERA Transponder Reader ETPB
Electric locks

The security electric locks are synchronised with the operator via the control unit. When an operator command is issued, the electric lock is released first, and only then does the gate begin to open. The lock is engaged again once the gate has closed. Required for gate leaves longer than 3.5 m.

 Operator technical specifications: 

Control unit MC800
Power supply 230 V
Motor version (24, 230V) 230 V
Power consumption 340 W
Force 500Nm N
Motor current 1,5 A
Gate type double-leaf
Protection rating 67 IP
Operating temperature -20 +55 °C
Installation underground
Length of one gate leaf 4 m
Maximum load 20 cycles / hour

 

For more information about the operator, please visit the page for the NICE LFAB4000 operator.

The operator was previously known as NICE BM4000.

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about NICE L-Fab LFAB4000 Drive Kit for a Single-Leaf Gate up to 4 m/650 kg

Product: NICE L-Fab LFAB4000 Drive Kit for a Single-Leaf Gate up to 4 m/650 kg
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page