Drive kit for sliding gates up to 400 kg/8 m NICE Road RD400 (F)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€563.02 including VAT
| Weight |
|---|
| 15 kg |
Description of Drive kit for sliding gates up to 400 kg/8 m NICE Road RD400 (F)
NICE Road RD400 operator is designed for sliding gates weighing up to 400 kg and a passage width up to 8 m (recommended maximum length 5m). It has an electromechanical stop switch. The operator is non-reversible. Detailed technical specifications ». Download the manual ».
| Set NICE-RD400-F contains: | ||||
|---|---|---|---|---|
|
1 × | NICE Road 400 Gate Opener | NICE-RD400-A | |
|
NICE electromechanical operator with RBA4R10 control unit and built-in receiver, suitable for gates weighing up to 400 kg.
|
Details 
|
|||
|
1 × | NICE Era INTI2 Remote Control | NICE-INTI2 | |
|
Remote control with two buttons for operating a gate automatically from a distance. You can use it to control two devices or send two different commands to one device. |
Details
|
|||
|
1 × | NICE ELDC LED Beacon with Antenna | NICE-ELDC | |
|
NICE LED ELDC flashing warning light made of impact-resistant polycarbonate with a built-in antenna for greater remote-control range (up to 150 m). |
Details
|
|||
|
4 m | Rack with metal reinforcement | LZ-1-1 | |
|
A sliding gate with a fixed rack is moved by the drive gear via a rack-and-pinion mechanism. |
Details
|
|||
|
1 × | NICE EPM photocells with conventional wiring | NICE-EPM | |
|
NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate hitting an obstacle. |
Details
|
|||
|
1 × | Installation Manual for the NICE Road 400 Gate Opener |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
2 unlocking keys
End stops
(Is this gate opener right for me?)
Compare with other gate openers:
| « Weaker kit | Alternative kit | Stronger kit » |
|---|---|---|
|
No. |
|
|
Gate opener features NICE Road 400
The gate opener is compact, safe and practical, making it ideal for both residential and commercial use. Impact-resistant cover, with an epoxy-coated aluminium alloy body.
The gate opener is suitable for automating sliding gates weighing up to 400 kg, with a leaf length of up to 8 m. These values apply under the conditions specified by the manufacturer, including weather conditions, temperature variations, gate rigidity and, above all, smooth gate movement. These conditions cannot always be achieved or controlled, so we recommend using the NICE Road RD400 gate opener at up to 60% of these values for optimal performance. See the Choosing a gate opener chapter for more information.
The conventional wiring setup allows you to power and control 2 pairs of photocells using a four-core cable.
The temperature sensor adjusts the gate opener's driving force according to the weather conditions.
Adjustable speed,, force and pause time for automatic gate closing, and more; see Programming.
Diagnostics using a warning light.
The gear module 4 is compatible with the toothed rack in our range.
The NICE Road RD400 is an electromechanical gate opener designed for Slovak climate conditions and complies with all European safety standards.
The NICE Road RD400 in pictures
| Manual release | Control unit | Wiring diagram |
|---|---|---|
 |
 |
 |
| Instructions for manual release > |
Programming the gate opener > |
Detailed wiring diagram > |
You can find the detailed wiring diagram and further technical information on the NICE Road RD400 gate opener's product page, or in the manual..
Warning: if you don't use photocells, that's not a problem—the gate opener can also operate without photocells. You just need to connect terminals 1 and 5 on the terminal block.
Gate opener specifications NICE Road RD400
| Speed | 0.25 m/s |
|---|---|
| Power supply | 230V, 50Hz |
| Power consumption | 210W |
| Torque | 12NM |
| Max. rated torque | 5 |
| Max. gate weight | 400kg |
| Ingress protection rating | IP 44 |
| Operating temperature | -20°C to +50°C |
| Insulation class | 1 |
| Gear module | 4 |
Full technical specifications on the page NICE Road RD400 drive unit only.
Compatible accessories for the NICE Road RD400 drive unit
We also recommend purchasing compatible optional accessories for the drive unit, or choosing one of the pre-assembled discounted kits:
| What | Why | Type |
|---|---|---|
| Warning light | The warning light flashes to indicate gate movement—ideal for exits with limited visibility. It also has a built-in antenna for greater remote-control range. | - LED warning light with antenna ELDC - multifunction LED light WLT |
| Photocells | When closing, they detect obstacles and stop the gate, preventing it from hitting a car or a person. | - photocells with conventional wiring BF - Era Photocell Medium EPM - Era Photocell Large EPL - Era Photocell Slim EPS - wireless/conventional FT210 - Era Photocell Medium Antivandal EPMA |
| Transmitter | For remote control of the gate. | - Era One ON2E, ON3EBD, ON3ELR, ON4E, ON9E - Era Flor Flo2RE, Flo4RE - FloR Flo2R-s, Flo4R-s - Inti INTI2, INTI2Y, INTI2L, INTI2B, INTI2R, INTI2G |
| Receiver | For remote control of the gate. The Road 400 drive unit already has a built-in receiver. These additional receivers are optional extras. |
- Wi-Fi receiver IT4WIFI - GSM receiver GSM LITE3+, GSM SMART3, GSM PROFI3 |
| Antenna | For greater remote-control range. | - built into the warning light ELDC - standalone antenna ABFKIT |
| Keypad | Useful if you forget your remote control, have a lot of vehicles or people coming and going, or don't want to give everyone a remote or open the gate manually. | - wired EDS |
| Key switch | Control the gate with a key using a switch wired to the drive unit and installed wherever you need it. | - surface-mounted, with a standard cylinder EKS - surface-mounted, with a European cylinder, EKSEU - recessed, with a standard cylinder EKSI - recessed, with a European cylinder EKSIEU |
| Card readers | Control the drive by presenting a card or key fob to the card reader. | - ERA Transponder Reader ETP |
| Gearing | Required for the drive automation itself — without a rack, the drive has nothing to move the gate with. | - nylon, with steel reinforcement, 33 cm LZ-1 - nylon, with steel reinforcement, 1 m LZ-10 - nylon, with steel reinforcement, reverse, 1 m LZ-15 - steel, 30x8mm, 1 m LZ-3 - steel, 30x12mm, 1 m LZ-5 - stainless steel, 30x10mm, 1 m LZ-7 |
| Backup power supply | Keeps the gate operational in the event of a power outage. | - backup battery PS124 |
Manuals and documents for download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
