NICE Wingo 2024 drive kit for a single-leaf gate up to 2 m/400 kg, with accessories
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€638.32 including VAT
| Weight |
|---|
| 11 kg |
Description of NICE Wingo 2024 drive kit for a single-leaf gate up to 2 m/400 kg, with accessories
Gate operator NICE Wingo WG2024 is designed for automation of swing gates up to a gate leaf length of 2 m and a weight of up to 400 kg. The operator is based on 24V and features PLA13 mechanical opening stop. The operator is non-reversible. The Wingo operators offer good value for money for the automation of swing gates in private and light industrial settings. The entire Wingo range is reliable and quiet. Detailed technical specifications ». Download the manual ». NICE Wingo WG2024 comes with a new control unit MC424LR30 which houses the MCA2R30 with a built-in receiver. The slot for an additional receiver is still available if you want to use an older receiver with your remote controls already programmed.
| The kit includes: | NICE-WG2024BE1 | |||
|---|---|---|---|---|
 |
1 × | NICE Wingo WG2024 operator | NICE-WG2024 | |
|
NICE Wingo WG2024 electromechanical operator, suitable for gate leaves weighing up to 400 kg and measuring up to 2 m in length. |
Details  |
|||
 |
1 × | NICE MC424LR30 control unit | NICE-MC424LR30 | |
|
The control unit in the stylish Moonclever enclosure houses the MCA2R30 control board with a built-in receiverto which the operators and accessories are connected; it is an essential part of the automation system. |
Details |
|||
 |
1 × | NICE Era INTI2 remote control |
NICE-INTI2 |
|
|
Two-button remote control for operating the gate remotely. Use it to control two devices or send two different commands to one device. |
Details |
|||
 |
1 × | Pair of NICE EPM photocells | NICE-EPM | |
|
The NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate striking an obstacle. |
Details |
|||
 |
1 × | NICE ELDC LED beacon with antenna | NICE-ELDC | |
|
NICE LED flashing ELDC warning light, made from impact-resistant polycarbonate and featuring a built-in antenna to extend the remote control range (up to 150 m). |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power outage, use it to release the operator so the gate can be moved manually by pushing or pulling it. |
||||
 |
1 × | NICE Wingo WG2024 installation manual | ||
|
Installation manual with wiring diagrams and instructions for programming and pairing remote controls, to help ensure a successful installation. |
Download |
|||
| 1 × | Mounting accessories | |||
|
Operator mounting components: front and rear brackets for welding. |
||||
(Is this operator right for me?)
Compare with other operators:
| « Less powerful kit | Alternative operator | More powerful kit » | |||||
|---|---|---|---|---|---|---|---|
| It isn't. |
230V NICE Wingo operator:
Price quote and delivery available on request. |
NICE Wingo WG3524 Gate Operator Kit
|
GATE OPERATOR FEATURES NICE WINGO WG2024
The operator has a two-piece body made of die-cast aluminium with a polyester coating that resists weathering. All internal moving parts are made of steel, light alloys and technopolymers. The guide nut is made of bronze to ensure good strength and quiet operation. The start capacitor is located inside the operator to make installation as simple as possible. The operators are dimensionally backward-compatible with the previous Moby and Pluto range from the Italian manufacturer NICE; all mounting dimensions and pin diameters are the same. The operator uses 24V, making it better suited to situations involving more frequent use than the 230V version. version, but it is not suitable for windy locations, especially with opaque, solid gate infill.
Control unit MCA2R30 in the control panel MC424LR30 allows easy programming, automatic detection of end positions, automatic fault diagnostics, setting the pause duration in automatic closing mode, pedestrian access, deceleration before reaching the end positions, an obstacle impact detection system, and emergency operation when using the PS124 backup power supply, an input for all types of safety edges, and much more.
ACCESSORIES COMPATIBLE WITH THE NICE WINGO WG2024 GATE OPERATOR
We also recommend purchasing these optional accessories compatible with the operator:
| What | Why | Type |
|---|---|---|
| Control panel | The operator's control electronics. |
|
| Flashing light | Flashes to indicate gate movement—ideal for entrances with limited visibility. Also includes an antenna for increased remote-control range. |
Alternatively, any flashing lights with 12V-24V power supply from other manufacturers. |
| Photo cells | They detect obstacles while the gate is closing and stop its movement, preventing it from hitting vehicles or people. | |
| Transmitter | For remote control of the gate. | |
| Receiver |
For remote control of the gate. In the MCA2R30 control unit, the receiver is already built in. These additional receivers are optional extras. |
|
| Antenna |
For better remote-control range. |
|
| Keypad |
If you forget your remote, or if many vehicles or people need access and you don't want to give everyone a remote or open the gate manually. |
|
| Key switch |
Operate the gate with a key using a switch wired to the drive unit at any convenient location. |
|
| Card readers |
Operate the drive by presenting a card or key fob to the card reader. |
|
| Electric locks |
Safety electric locks are synchronised with the drive unit via the control unit. When a command is sent to the drive unit, the electric lock unlocks first; only then does the gate begin to open. The lock engages again once the gate has closed. Required for gate leaves over 3.5 m long. |
|
| Backup power supply |
Backup power source. |
NICE WINGO WG2024 DRIVE MANUAL
NICE drive manual Wingo WG2024 download here:
NICE Wingo WG2024 drive manual
| Wingo WG2024 drive unit: | MC424LR10 and MC424LR30 control units |
|---|---|
| What does the drive unit itself include?… | Installation and fitting…, Wiring… |
| Compatible accessories in detail… | Connecting the control unit… |
| Drive unit installation… | Photocells…, |
| Technical specifications… | Starting up the control unit…, LED diagnostics |
| Manual release instructions… | Technical specifications… |
NICE Wingo drive unit photo gallery
|
Installation example |
Installation example |
Installation example |
|
Installation example |
Installation example |
Installation example |
|
Installation example
|
Gate opener unlocked |
Gate opener with the cover removed |
|
Rear view from below |
Worm screw and internal mechanical stop |
Front view from below |
|
Rear view with the cable connected |
|
Technical specifications
| Detailed technical specifications of NICE Wingo WG2024 gate openers > | Detailed technical specifications of the NICE Moonclever MC424LR10 control unit > |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
