NICE Wingo 2024 drive kit for double-leaf gates – one leaf up to 2 m / 400 kg, with accessories
TOP| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€759.27 including VAT
| Weight |
|---|
| 17 kg |
Description of NICE Wingo 2024 drive kit for double-leaf gates – one leaf up to 2 m / 400 kg, with accessories
Gate operator NICE Wingo WG2024 is designed to automate swing gates with a gate leaf length of 2 m and weight of up to up to 400 kg. The operator is built on 24V and features PLA13 mechanical opening stop. The operator is non-reversible. The Wingo operators offer good value for money for automating swing gates in residential and light industrial settings. The entire Wingo range is reliable and quiet. Detailed technical specifications ». Download the manual ». NICE Wingo WG2024 features a new control unit MC424LR30 which incorporates a MCA2R30 with a built-in receiver, while the slot for an additional receiver has been retained, in case you want to use an older receiver that has your remote controls programmed into it.
| The set includes: | NICE-WG2024BE2 | |||
|---|---|---|---|---|
 |
2 × | NICE Wingo WG2024 operator | NICE-WG2024 | |
|
NICE Wingo WG2024 electromechanical operator for gate leaves weighing up to 400 kg and measuring up to 2m in length. |
Details  |
|||
 |
1 × | NICE MC424LR30 control unit | NICE-MC424LR30 | |
|
The control unit in the Moonclever design enclosure includes a control board MCA2R30 with a built-in receiver, to which the operators and accessories are connected, is an essential part of the automation system. |
Details |
|||
 |
1 × | NICE Era INTI2 remote control | NICE-INTI2 | |
|
Two-button remote control for operating an automatic gate remotely. Use it to control two devices or to send two different commands to one device. |
Details |
|||
 |
1 × | Pair of NICE EPM photocells | NICE-EPM | |
|
NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate striking an obstacle. |
Details |
|||
 |
1 × | NICE ELDC LED beacon with antenna | NICE-ELDC | |
|
NICE LED flashing ELDC warning light made of impact-resistant polycarbonate, with a built-in antenna to extend the remote control range (up to 150 m). |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it releases the operator so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Wingo WG2024 installation manual | ||
|
Installation manual for successful setup, with wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
| 1 × | Installation accessories | |||
|
Operator installation components, front and rear welding brackets, |
||||
(Is this operator right for me?)
Compare with other operators:
| « Lower-powered set | Alternative operator | Higher-powered set » | |||||
|---|---|---|---|---|---|---|---|
|
No.
|
230V NICE Wingo operator:
Quotation and delivery available to order. |
NICE Wingo WG3524 operator kit
|
OPERATOR FEATURES NICE WINGO WG2024
The operator consists of a two-piece die-cast aluminium body with a polyester coating resistant to atmospheric conditions. All internal moving parts are made of steel, light alloys and technopolymers. The lead nut is made of bronze to ensure strength and quiet operation. The starting capacitor is housed inside the operator to make installation as simple as possible. The operators are dimensionally backward-compatible with the previous Moby and Pluto series from Italian manufacturer NICE; all mounting dimensions and pin diameters are the same. The operator features 24V, making it more suitable for situations involving more frequent use than the 230V version, but it is not suitable for windy conditions, especially with opaque, solid gate infills.
Control unit MCA2R30 in the control unit MC424LR30 allows simple programming, automatic learning of end positions, automatic fault diagnosis, setting the pause duration in automatic closing mode, pedestrian passage, deceleration before end positions, obstacle impact detection, and possible emergency operation using PS124 backup power supply, input for all types of safety edges for the drive, and much more.
ACCESSORIES COMPATIBLE WITH THE NICE WINGO WG2024 DRIVE
We also recommend purchasing these optional accessories compatible with the drive:
| What | Why | Type |
|---|---|---|
| Control unit | The drive’s control electronics. |
|
| Warning light | Flashes to signal gate movement—ideal for driveways with limited visibility. Also includes an antenna for greater remote-control range. |
Alternatively, all warning lights with 12V–24V power supply from other manufacturers. |
| Photoelectric safety sensors | They detect obstacles and stop the gate as it closes, preventing it from hitting vehicles or people. | |
| Remote control | For remote operation of the gate. | |
| Receiver |
For remote operation of the gate. The control unit MCA2R30 already has a built-in receiver. These additional receivers are optional extras. |
|
| Antenna |
For improved remote-control range. |
|
| Keypad |
If you forget your remote control, or if many vehicles or people visit and you don't want to give everyone a remote or open the gate yourself each time. |
|
| Key switch |
Operate the gate with a key using a switch connected to the drive by cable, wherever you choose. |
|
| Card readers |
Operate the gate by presenting a card or key fob to the card reader. |
|
| Electric locks |
Safety electric locks are synchronised with the operator via the control unit. When an operating command is sent, the electric lock unlocks first, and only then does the gate begin to open. After the gate closes, the lock engages again. Required for gate leaves longer than 3.5 m. |
|
| Backup power supply |
Backup power source. |
NICE WINGO WG2024 OPERATOR MANUAL
NICE operator manual Wingo WG2024 download here:
NICE Wingo WG2024 operator manual
| Wingo WG2024 operator: | MC424LR10 and MC424LR30 control units |
|---|---|
| What does the operator itself include?… | Installation and mounting…, Wiring… |
| Compatible accessories in detail… | Connecting the control unit… |
| Operator installation… | Photocells…, |
| Technical specifications… | Starting up the control unit…, LED diagnostics |
| Manual release instructions… | Technical specifications… |
NICE Wingo operator photo gallery
|
Installation example |
Installation example |
Installation example |
|
Installation example |
Installation example |
Installation example |
|
Installation example
|
Operator with the release engaged |
Operator with the cover removed |
|
Rear view from below |
Worm screw and internal mechanical stop |
Front view from below |
|
Rear view with the cable connected |
|
Technical specifications
| Detailed technical specifications for NICE Wingo WG2024 operators > | Detailed technical specifications for the NICE Moonclever MC424LR10 control unit > |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
