NICE Wingo 2024 drive kit for a double-leaf gate – one leaf up to 2 m/400 kg (X)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€667.90 including VAT
| Weight |
|---|
| 16 kg |
Description of NICE Wingo 2024 drive kit for a double-leaf gate – one leaf up to 2 m/400 kg (X)
Drive NICE Wingo WG2024 is designed for automation of swing gates up to leaf length 2 m and weight up to 400 kg. The drive is based on 24V and has PLA13 mechanical opening stop. The drive is non-reversible. The entire Wingo range is a sensible price/performance choice for automation of swing gates in private and light industrial settings. The entire range Wingo is reliable and quiet. Detailed technical specifications ». Download the manual ». NICE Wingo WG2024 features a new control unit MC424LR30 which incorporates a MCA2R30 with a built-in receiver, the slot for an optional receiver has been retained in case you want to use an older receiver with your remote controls already programmed into it.
| The set includes: | NICE-WG2024-BX2 | |||
|---|---|---|---|---|
 |
2 × | NICE Wingo WG2024 operator | NICE-WG2024 | |
|
NICE Wingo WG2024 electromechanical operator for gate leaves weighing up to 400 kg and up to 2m long. |
Detail  |
|||
 |
1 × | NICE MC424LR30 control unit | NICE-MC424LR30 | |
|
Control unit housed in the Moonclever designer casing, including a built-in control board MCA2R30 with built-in receiver, to which the operators and accessories are connected, is an essential part of the automation system. |
Detail |
|||
 |
2 × | NICE Era INTI2 remote control | NICE-INTI2 | |
|
Two-button remote control for operating the gate automatically from a distance. Use it to control two devices or send two different commands to one device. |
Detail |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it releases the operator so the gate can be moved manually by pushing or pulling it. |
||||
 |
1 × | NICE Wingo WG2024 installation manual | ||
|
Installation manual for successful setup, with wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
| 1 × | Installation accessories | |||
|
Operator mounting components, front and rear brackets for welding, |
||||
(Is this operator right for me?)
Compare with other operators:
| « Lower-powered set | Alternative operator | Higher-powered set » | |||||
|---|---|---|---|---|---|---|---|
|
No.
|
NICE Wingo 230V operator:
Price quote and delivery available to order. |
NICE Wingo WG3524 operator kit
|
OPERATOR FEATURES NICE WINGO WG2024
The operator features a two-piece die-cast aluminium housing with a polyester finish resistant to weathering. All internal moving parts are made of steel, light alloys and technopolymers. The lead nut is made of bronze for strength and quiet operation. The starting capacitor is housed inside the operator to make installation as simple as possible. The operators are dimensionally backward-compatible with the previous Moby and Pluto series from Italian manufacturer NICE; all mounting dimensions and pin diameters are the same. The operator uses 24V, making it better suited to frequent use than the 230V version, but it is not suitable for windy locations, especially with opaque, solid gate infill.
Control unit MCA2R30 in the control unit MC424LR30 allows easy programming, automatic learning of end positions, automatic fault diagnosis, setting the pause time in automatic closing mode, pedestrian access, deceleration before reaching the end positions, obstacle detection, and possible emergency operation when using PS124 backup power supply, an input for all types of operator safety edges, and much more.
ACCESSORIES COMPATIBLE WITH THE NICE WINGO WG2024 OPERATOR
We also recommend purchasing these optional compatible accessories for the operator:
| What | Why | Type |
|---|---|---|
| Control unit | Operator control electronics. Includes a built-in control unit. Traditional wiring system. |
|
| Warning light | Flashes to indicate gate movement—ideal for entrances with limited visibility. Also includes an antenna for extended remote-control range. |
Alternatively all beacons with a 12V-24V power supply from other manufacturers. |
| Photocells | They detect obstacles while closing and stop the movement, preventing the gate from hitting vehicles or people. | |
| Transmitter | For remote control of the gate. | |
| Receiver |
For remote control of the gate. The control unit MCA2R30 already has a built-in receiver. These additional receivers are optional extras. |
|
| Antenna |
For extended remote-control range. |
|
| Keypad |
If you forget your remote control, or if many vehicles or people visit and you don't want to give each of them a remote or open the gate manually. |
|
| Key switch |
Operate the gate with a key using a switch connected to the drive by cable, wherever you choose to install it. |
|
| Card readers |
Operate the drive by presenting a card or key fob to the card reader. |
|
| Electric locks |
The safety electric locks are synchronised with the drive via the control unit. When an operator command is given, the electric lock is released first, and only then does the gate start opening. Likewise, when the gate closes, the electric lock engages. Required for gate leaves longer than 3.5 m. |
|
| Backup power supply |
Backup power source. |
NICE WINGO WG2024 OPERATOR MANUAL
NICE operator manual Wingo WG2024 download here:
NICE Wingo WG2024 operator manual
| Wingo WG2024 operator: | MC424LR10 and MC424LR30 control units |
|---|---|
| What does the operator itself include?… | Installation and fitting…, Wiring… |
| Compatible accessories in detail… | Wiring the control unit… |
| Operator installation… | Photocells…, |
| Technical specifications… | Starting up the control unit…, LED diagnostics |
| Manual release instructions… | Technical specifications… |
NICE Wingo operator photo gallery
|
Installation example |
Installation example |
Installation example |
|
Installation example |
Installation example |
Installation example |
|
Installation example
|
Operator with release mechanism disengaged |
Operator with cover removed |
|
Rear underside |
Worm screw and internal mechanical stop |
Front underside |
|
Rear view with cable connected |
|
Technical specifications
| Detailed technical specifications of NICE Wingo WG2024 operators > | Detailed technical specifications of the NICE Moonclever MC424LR10 control unit > |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
