NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with photocells


Product availability: In stock

We normally dispatch goods within 24 hours.

NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with photocells NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with photocells
NICE-TOO4500-BZ1
in stock
€513.55 excluding VAT
€631.67 including VAT

 pcs
Weight
7,60 kg

Description of NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with photocells

Gate opener NICE TOO TOO4500 is designed for automating swing gates up to gate leaf length 4.5m and weight up to 250kg. The opener is based on 230V. The opener is non-reversible. The TOO offer good value for money for automating swing gates in residential and light industrial settings. Download the manual ».

Set NICE-TOO4500-BZ1 contains:
NICE TOO TOO4500 Drive 1 × NICE TOO TOO4500 Drive NICE-TOO4500

NICE TOO4500 electromechanical gate operator, suitable for a gate leaf weighing up to 250 kg and measuring up to 4.5 m in length.

  • 2 unlocking keys 2 unlocking keys
  • front + rear bracket front + rear bracket
Details
NICE MC800 Control Unit 1 × NICE MC800 Control Unit NICE-MC800

The control unit in a designer enclosure, which contains the MCA5 control board to which the drives and accessories are connected, is part of the automation system.

 Details
NICE OXIBD remote control receiver 1 × NICE OXIBD remote control receiver NICE-OXIBD

Radio signal receiver for remote controls. Supports two-way communication with selected remote control models. Range of up to 200m with an antenna.

 Details
NICE Era INTI2 Remote Control 1 × NICE Era INTI2 Remote Control NICE-INTI2

Remote control with two buttons for operating a gate automatically from a distance. You can use it to control two devices or send two different commands to one device.

 Details
NICE EPM photocells with conventional wiring 1 × NICE EPM photocells with conventional wiring NICE-EPM

NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate hitting an obstacle.

 Details
Installation manual for the NICE TOO gate operator 1 × Installation manual for the NICE TOO gate operator Download 

Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls.

Compatible accessories

We also recommend purchasing the following compatible optional accessories for the operator:

What Why Type
Control unit

Operator control electronics.
Warning light Flashes to indicate gate movement—ideal for driveways with poor visibility. Also includes an antenna for greater remote-control range.
  • LED warning light with antenna ELAC

Alternatively, all warning lights with a 230V power supply, including those from other manufacturers.
Photocells

Detect obstacles while the gate is closing and stop it, preventing it from hitting vehicles or people.

The control unit MC800 supports connecting multiple pairs of relay-type and BlueBus photocells. However, they cannot be mixed; all pairs must be the same type.
  • Wired relay type - EPM
  • Reflector-type relay - EPMOR
  • Wired anti-vandal relay type - EPMA
  • Wired BlueBus type - EPMB, EPLB, EPSB
  • BlueBus reflector type - EPMORB
  • Wireless BlueBus type - EPMOW
  • Adjustable wired BlueBus type - F210B
  • Wireless BlueBus type - FT210B
  • Wired BlueBus type - EPMOB
Transmitter For remote control of the gate.
Receiver

For remote control of the gate.

Antenna

For greater remote-control range.
  •  integrated into the warning light ELAC
  • standalone antenna ABFKIT
Keypad

Useful if you forget your remote control, or if many vehicles or people visit and you don't want to give everyone a remote or open the gate manually.
Key switch

For operating the gate with a key using a switch connected to the operator by cable, wherever you need it.
  • surface-mounted, with a standard cylinder EKS
  • surface-mounted, with a European cylinder, EKSEU
  • recessed, with a standard cylinder EKSI
  • recessed, with a European cylinder EKSIEU
Card readers

Operate the gate using a card or key fob by holding it against the card reader.
  • ERA Transponder Reader ETPB
Electric locks

The security electric locks are synchronised with the drive via the control unit. When a drive command is given, the electric lock is unlocked first, and only then does the gate start opening. The lock is engaged again once the gate has closed. Required for gate leaves over 3.5 m long.

DRIVE TECHNICAL SPECIFICATIONS NICE TOO TOO4500

Power supply (V) 230
Max. weight per gate leaf (kg) 250
Max. length per gate leaf (m) 4,5
Protection rating (IP) 54
Frequency (Hz) 50
Operating temperature (°C) -20 to +50
Dimensions of one arm (mm) 800x100x177
Weight of one arm (kg)  6

 Instructions for pairing remote controls:

 Instructions for pairing and deleting a remote control, and adding it to or removing it from the memory of the NICE drive receiver

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with photocells

Product: NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with photocells
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page