NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with accessories


Product availability: In stock

We normally dispatch goods within 24 hours.

NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with accessories NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with accessories
NICE-TOO4500-BE1
in stock
€552.89 excluding VAT
€680.05 including VAT

 pcs
Weight
7,70 kg

Description of NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with accessories

Gate opener NICE TOO TOO4500 is designed for automating swing gates up to gate leaf length 4.5m and weight up to 250kg. The opener is based on 230V. The opener is non-reversible. The TOO offer good value for money for automating swing gates in residential and light industrial settings. Download the manual ».

Set NICE-TOO4500-BE1 contains:
NICE TOO TOO4500 Drive 1 × NICE TOO TOO4500 Drive NICE-TOO4500

NICE TOO4500 electromechanical gate operator, suitable for a gate leaf weighing up to 250 kg and measuring up to 4.5 m in length.

  • 2 unlocking keys 2 unlocking keys
  • front + rear bracket front + rear bracket
Details
NICE MC800 Control Unit 1 × NICE MC800 Control Unit NICE-MC800

The control unit in a designer enclosure, which contains the MCA5 control board to which the drives and accessories are connected, is part of the automation system.

 Details
NICE OXIBD remote control receiver 1 × NICE OXIBD remote control receiver NICE-OXIBD

Radio signal receiver for remote controls. Supports two-way communication with selected remote control models. Range of up to 200m with an antenna.

 Details
NICE Era INTI2 Remote Control 1 × NICE Era INTI2 Remote Control NICE-INTI2

Remote control with two buttons for operating a gate automatically from a distance. You can use it to control two devices or send two different commands to one device.

 Details
NICE EPM photocells with conventional wiring 1 × NICE EPM photocells with conventional wiring NICE-EPM

NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate hitting an obstacle.

 Details
NICE ELAC LED beacon with antenna 1 × NICE ELAC LED beacon with antenna NICE-ELAC

NICE LED flashing warning light ELAC, made of impact-resistant polycarbonate, with a built-in antenna for increased remote-control range (up to 150 m).

 Details
Installation manual for the NICE TOO gate operator 1 × Installation manual for the NICE TOO gate operator Download 

Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls.

Compatible accessories

We also recommend purchasing the following optional accessories compatible with the drive:

What Why Type
Control unit

Drive control electronics.
Warning light Flashes to indicate gate movement—ideal for exits with limited visibility. Also includes an antenna for greater remote-control range.
  • LED warning light with antenna ELAC

Alternatively, all warning lights with a 230V power supply, including those from other manufacturers.
Photocells

They detect obstacles while the gate is closing and stop it, preventing it from hitting vehicles or people.

Control unit MC800 supports connecting multiple pairs of relay-type and BlueBus photocells. However, the two types cannot be combined; all pairs must be the same type.
  • Wired relay type – EPM
  • Reflective relay type – EPMOR
  • Wired anti-vandal relay type – EPMA
  • Wired BlueBus type – EPMB, EPLB, EPSB
  • Reflective BlueBus type – EPMORB
  • Wireless BlueBus type – EPMOW
  • Adjustable wired BlueBus type – F210B
  • Wireless BlueBus type – FT210B
  • Wired BlueBus type – EPMOB
Transmitter For remote control of the gate.
Receiver

For remote control of the gate.

Antenna

For improved remote-control range.
  •  integrated into the warning light ELAC
  • standalone antenna ABFKIT
Keypad

If you forget your remote control, or if many vehicles or people visit and you do not want to give everyone a remote or open the gate manually each time.
Key switch

For operating the gate with a key using a switch connected to the drive by cable and installed wherever needed.
  • surface-mounted, with a standard cylinder EKS
  • surface-mounted, with a European cylinder, EKSEU
  • recessed, with a standard cylinder EKSI
  • recessed, with a European cylinder EKSIEU
Card readers

Control the gate operator by presenting a card or key fob to the card reader.
  • ERA Transponder Reader ETPB
Electric locks

The security electric locks are synchronised with the operator via the control unit. When a command is sent to the operator, the electric lock is released first; only then does the gate begin to open. The lock engages again once the gate has closed. Required for gate leaves longer than 3.5 m.

OPERATOR TECHNICAL SPECIFICATIONS NICE TOO TOO4500

Power supply (V) 230
Max. weight of one gate leaf (kg) 250
Max. length of one gate leaf (m) 4.5
Ingress protection rating (IP) 54
Frequency (Hz) 50
Operating temperature (°C) -20 to +50
Dimensions of one arm (mm) 800x100x177
Weight of one arm (kg)  6

 Instructions for pairing remote controls:

 Instructions for pairing and deleting a remote control, and for saving it to or deleting it from the NICE operator receiver's memory

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with accessories

Product: NICE TOO TOO4500 drive kit for a single-leaf gate – one leaf, 4.5 m/250 kg, with accessories
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page