NICE TOO TOO4500 drive kit for a double-leaf gate – one leaf 4.5 m/250 kg, with photocells


Product availability: In stock

We normally dispatch goods within 24 hours.

NICE TOO TOO4500 drive kit for a double-leaf gate – one leaf 4.5 m/250 kg, with photocells NICE TOO TOO4500 drive kit for a double-leaf gate – one leaf 4.5 m/250 kg, with photocells
NICE-TOO4500-BZ2
in stock
€607.01 excluding VAT
€746.62 including VAT

 pcs
Weight
14 kg

Description of NICE TOO TOO4500 drive kit for a double-leaf gate – one leaf 4.5 m/250 kg, with photocells

Gate opener NICE TOO TOO4500 is designed for automating swing gates up to gate leaf length 4.5m and weight up to 250kg. The opener is based on 230V. The opener is non-reversible. The TOO offer good value for money for automating swing gates in residential and light industrial settings. Download the manual ».

Set NICE-TOO4500-BZ2 contains:
NICE TOO TOO4500 Drive 2 × NICE TOO TOO4500 Drive NICE-TOO4500

NICE TOO4500 electromechanical gate operator, suitable for a gate leaf weighing up to 250 kg and measuring up to 4.5 m in length.

  • 2 unlocking keys 2 unlocking keys
  • front + rear bracket front + rear bracket
Details
NICE MC800 Control Unit 1 × NICE MC800 Control Unit NICE-MC800

The control unit in a designer enclosure, which contains the MCA5 control board to which the drives and accessories are connected, is part of the automation system.

 Details
NICE OXIBD remote control receiver 1 × NICE OXIBD remote control receiver NICE-OXIBD

Radio signal receiver for remote controls. Supports two-way communication with selected remote control models. Range of up to 200m with an antenna.

 Details
NICE Era INTI2 Remote Control 1 × NICE Era INTI2 Remote Control NICE-INTI2

Remote control with two buttons for operating a gate automatically from a distance. You can use it to control two devices or send two different commands to one device.

 Details
NICE EPM photocells with conventional wiring 1 × NICE EPM photocells with conventional wiring NICE-EPM

NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate hitting an obstacle.

 Details
Installation manual for the NICE TOO gate operator 1 × Installation manual for the NICE TOO gate operator Download 

Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls.

DRIVE TECHNICAL SPECIFICATIONS NICE TOO TOO4500

Power supply (V) 230
Max. weight of one leaf (kg) 250
Max. length of one leaf (m) 4.5
Protection rating (IP) 54
Frequency (Hz) 50
Operating temperature (°C) -20 to +50
Dimensions of one arm (mm) 800x100x177
Weight of one arm (kg)  6

ACCESSORIES COMPATIBLE WITH THE NICE TOO TOO4500 DRIVE

We also recommend purchasing these optional accessories compatible with the drive:

What Why Type
Control unit

Drive control electronics.
Warning light Flashes to indicate gate movement—ideal for exits with limited visibility. Also includes an antenna for extended remote-control range.
  • LED warning light with antenna ELAC

Alternatively, all warning lights with a 230 V power supply, including those from other manufacturers.
Photocells

Detect obstacles while the gate is closing and stop its movement, preventing the gate from hitting vehicles or people.

Control unit MC800 supports connection of multiple pairs of relay-type and BlueBus photocells. However, they cannot be mixed—all pairs must be the same type.
  • Wired relay type - EPM
  • Relay type with reflector - EPMOR
  • Vandal-resistant wired relay type - EPMA
  • EPMB EPMB, EPLB, EPSB
  • BlueBus type with reflector - EPMORB
  • Wireless BlueBus type - EPMOW
  • Adjustable wired BlueBus type - F210B
  • Wireless BlueBus type - FT210B
  • Wired BlueBus type - EPMOB
Transmitter For remote control of the gate.
Receiver

For remote control of the gate.

Antenna

For better remote control range.
  •  integrated into the beacon ELAC
  • standalone antenna ABFKIT
Keypad

If you forget your remote control, or if many vehicles or people visit you and you don't want to give everyone a remote or open the gate manually.
Key switch

For operating the gate with a key using a switch connected to the drive by cable at any location.
  • surface-mounted, with a standard cylinder EKS
  • surface-mounted, with a European cylinder, EKSEU
  • flush-mounted, with a standard cylinder EKSI
  • flush-mounted, with a European cylinder EKSIEU
Card readers

Operate the drive by presenting a card or key fob to the card reader.
  • ERA Transponder Reader ETPB
Electric locks

Safety electric locks are synchronised with the drive via the control unit. When the drive receives an activation command, the electric lock is released first, and only then does the gate start to open. Likewise, after the gate closes, the electric lock engages. Required for gate leaves longer than 3.5 m.

Instructions for pairing remote controls:

 Instructions for pairing and deleting remote controls, and adding them to or removing them from the NICE drive receiver's memory

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about NICE TOO TOO4500 drive kit for a double-leaf gate – one leaf 4.5 m/250 kg, with photocells

Product: NICE TOO TOO4500 drive kit for a double-leaf gate – one leaf 4.5 m/250 kg, with photocells
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page