NICE TOO TOO4500 drive kit for a double-leaf gate – one leaf 4.5 m/250 kg, with accessories
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€795.01 including VAT
| Weight |
|---|
| 14 kg |
Description of NICE TOO TOO4500 drive kit for a double-leaf gate – one leaf 4.5 m/250 kg, with accessories
Drive NICE TOO TOO4500 is designed for automating swing gates up to a gate leaf length of 4.5m and a weight of up to 250kg. The drive is based on 230V. The drive is non-reversible. The TOO are a good value-for-money choice for automating swing gates in private and light industrial settings. Download the manual ».
| Set NICE-TOO4500-BE2 contains: | ||||
|---|---|---|---|---|
|
2 × | NICE TOO TOO4500 Drive | NICE-TOO4500 | |
|
NICE TOO4500 electromechanical gate operator, suitable for a gate leaf weighing up to 250 kg and measuring up to 4.5 m in length.
|
Details 
|
|||
|
1 × | NICE MC800 Control Unit | NICE-MC800 | |
|
The control unit in a designer enclosure, which contains the MCA5 control board to which the drives and accessories are connected, is part of the automation system. |
Details
|
|||
|
1 × | NICE OXIBD remote control receiver | NICE-OXIBD | |
|
Radio signal receiver for remote controls. Supports two-way communication with selected remote control models. Range of up to 200m with an antenna. |
Details
|
|||
|
1 × | NICE Era INTI2 Remote Control | NICE-INTI2 | |
|
Remote control with two buttons for operating a gate automatically from a distance. You can use it to control two devices or send two different commands to one device. |
Details
|
|||
|
1 × | NICE EPM photocells with conventional wiring | NICE-EPM | |
|
NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate hitting an obstacle. |
Details
|
|||
|
1 × | NICE ELAC LED beacon with antenna | NICE-ELAC | |
|
NICE LED flashing warning light ELAC, made of impact-resistant polycarbonate, with a built-in antenna for increased remote-control range (up to 150 m). |
Details
|
|||
|
1 × | Installation manual for the NICE TOO gate operator |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
2 unlocking keys
front + rear bracket
DRIVE TECHNICAL SPECIFICATIONS NICE TOO TOO4500
| Power supply | (V) | 230 |
|---|---|---|
| Max. weight of one leaf | (kg) | 250 |
| Max. length of one leaf | (m) | 4.5 |
| Ingress protection rating | (IP) | 54 |
| Frequency | (Hz) | 50 |
| Operating temperature | (°C) | -20 to +50 |
| Dimensions of one arm | (mm) | 800x100x177 |
| Weight of one arm | (kg) | 6 |
ACCESSORIES COMPATIBLE WITH THE NICE TOO TOO4500 DRIVE
We also recommend purchasing the following optional accessories compatible with the drive:
| What | Why | Type |
|---|---|---|
| Control unit |
Drive control electronics. |
|
| Warning light | Flashes to indicate gate movement—ideal for exits with poor visibility. Also includes an antenna for increased remote-control range. |
Alternatively, all warning lights with a 230V power supply, including those from other manufacturers. |
| Photocells |
Detect obstacles as the gate closes and stop its movement, preventing it from hitting cars or people. The control unit MC800 supports connection of multiple pairs of relay-type and BlueBus photocells. However, the two types cannot be mixed—all pairs must be the same type. |
|
| Transmitter | For remote control of the gate. | |
| Receiver |
For remote control of the gate. |
|
| Antenna |
For better remote control range. |
|
| Keypad |
If you forget your remote control, or if lots of vehicles or people come to your property and you don't want to give everyone a remote or open the gate manually. |
|
| Key switch |
For operating the gate with a key using a switch wired to the drive at any location. |
|
| Card readers |
Operate the drive by presenting a card or key fob to the card reader. |
|
| Electric locks |
Safety electric locks are synchronized with the drive via the control unit. When a command is sent to the drive, the electric lock is unlocked first, and only then does the gate begin to open. Likewise, after the gate closes, the electric lock is locked. They are required for gate leaves longer than 3.5 m. |
|
Remote control pairing instructions:
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
