NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf up to 3 m/300 kg, with accessories


Product availability: In stock

We normally dispatch goods within 24 hours.

NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf up to 3 m/300 kg, with accessories NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf up to 3 m/300 kg, with accessories
NICE-TOO3000-BE1
in stock
€498.28 excluding VAT
€612.88 including VAT

 pcs
Weight
7,70 kg

Description of NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf up to 3 m/300 kg, with accessories

Gate operator NICE TOO TOO3000 is designed to automate swing gates up to a leaf length of 3m and a weight of up to 300kg. The operator is built around 230V. The operator is non-reversible. The TOO operators offer good value for money for automating swing gates in private and light industrial settings. Download the manual ».

Set NICE-TOO3000-BE1 contains:
NICE TOO TOO3000 drive 1 × NICE TOO TOO3000 drive NICE-TOO3000

NICE TOO TOO3000 electromechanical gate operator for gate leaves weighing up to 300 kg and measuring up to 3 m in length.

  • 2 pcs. release keys 2 pcs. release keys
  • front + rear bracket front + rear bracket
Details
NICE MC800 Control Unit 1 × NICE MC800 Control Unit NICE-MC800

The control unit in a designer enclosure, which contains the MCA5 control board to which the drives and accessories are connected, is part of the automation system.

 Details
NICE OXIBD remote control receiver 1 × NICE OXIBD remote control receiver NICE-OXIBD

Radio signal receiver for remote controls. Supports two-way communication with selected remote control models. Range of up to 200m with an antenna.

 Details
NICE Era INTI2 Remote Control 1 × NICE Era INTI2 Remote Control NICE-INTI2

Remote control with two buttons for operating a gate automatically from a distance. You can use it to control two devices or send two different commands to one device.

 Details
NICE EPM photocells with conventional wiring 1 × NICE EPM photocells with conventional wiring NICE-EPM

NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate hitting an obstacle.

 Details
NICE ELAC LED beacon with antenna 1 × NICE ELAC LED beacon with antenna NICE-ELAC

NICE LED flashing warning light ELAC, made of impact-resistant polycarbonate, with a built-in antenna for increased remote-control range (up to 150 m).

 Details
Installation manual for the NICE TOO gate operator 1 × Installation manual for the NICE TOO gate operator Download 

Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls.

Compatible accessories

We also recommend purchasing the following compatible optional accessories for the operator:

What Why Type
Control unit

Operator control electronics.
Warning light Flashes to indicate gate movement—ideal for exits with limited visibility. Also includes an antenna for increased remote-control range.
  • LED warning light with antenna ELAC

Alternatively all warning lights with a 230V power supply, including those from other manufacturers.
Photoelectric safety sensors

They detect obstacles while the gate is closing and stop its movement, preventing it from hitting vehicles or people.

Control unit MC800 supports connecting multiple pairs of both relay-type and BlueBUS photocells. However, the two types cannot be combined—all pairs must be the same type.
  • Wired relay-type – EPM
  • Relay-type with reflector – EPMOR
  • Wired anti-vandal relay-type – EPMA
  • Wired BlueBUS type – EPMB, EPLB, EPSB
  • BlueBUS type with reflector – EPMORB
  • Wireless BlueBUS type – EPMOW
  • Adjustable wired BlueBUS type – F210B
  • Wireless BlueBUS type – FT210B
  • Wired BlueBUS type – EPMOB
Remote control For remote operation of the gate.
Receiver

For remote operation of the gate.

Antenna

For improved remote-control range.
  •  integrated into the warning light ELDC
  • standalone antenna ABFKIT
Keypad

If you forget your remote control, or if many vehicles or people need access and you don't want to give everyone a remote or open the gate yourself each time.
Key switch

For operating the gate with a key using a switch wired to the operator at any location.
  • surface-mounted, with a standard cylinder EKS
  • surface-mounted, with a Euro cylinder, EKSEU
  • recessed, with a standard cylinder EKSI
  • recessed, with a Euro cylinder EKSIEU
Card readers

Control the gate operator by presenting a card or key fob to the card reader.
  • ERA Transponder Reader ETPB
Electric locks

The security electric locks are synchronised with the operator via the control unit. When an open command is sent to the operator, the electric lock is released first, and only then does the gate start to open. Once the gate is closed, the electric lock engages again. Required for gate leaves longer than 3.5 m.

OPERATOR TECHNICAL SPECIFICATIONS NICE TOO TOO3000

Power supply (V) 230
Max. weight of one gate leaf (kg) 300
Max. length of one gate leaf (m) 3
Ingress protection rating (IP) 54
Frequency (Hz) 50
Operating temperature (°C) -20 to +50
Dimensions of one arm (mm) 700x100x177
Weight of one arm (kg)  6

Remote control pairing instructions:

 Instructions for pairing, deleting and registering a remote control in/from the memory of the NICE operator receiver

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf up to 3 m/300 kg, with accessories

Product: NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf up to 3 m/300 kg, with accessories
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page