NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf, 3 m/300 kg, with photocells


Product availability: In stock

We normally dispatch goods within 24 hours.

NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf, 3 m/300 kg, with photocells NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf, 3 m/300 kg, with photocells
NICE-TOO3000-BZ1
in stock
€458.94 excluding VAT
€564.49 including VAT

 pcs
Weight
7,60 kg

Description of NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf, 3 m/300 kg, with photocells

Gate operator NICE TOO TOO3000 is designed to automate swing gates up to a leaf length of 3m and a weight of up to 300kg. The operator is built around 230V. The operator is non-reversible. The TOO operators offer good value for money for automating swing gates in private and light industrial settings. Download the manual ».

Set NICE-TOO3000-BZ1 contains:
NICE TOO TOO3000 drive 1 × NICE TOO TOO3000 drive NICE-TOO3000

NICE TOO TOO3000 electromechanical gate operator for gate leaves weighing up to 300 kg and measuring up to 3 m in length.

  • 2 pcs. release keys 2 pcs. release keys
  • front + rear bracket front + rear bracket
Details
NICE MC800 Control Unit 1 × NICE MC800 Control Unit NICE-MC800

The control unit in a designer enclosure, which contains the MCA5 control board to which the drives and accessories are connected, is part of the automation system.

 Details
NICE Era INTI2 Remote Control 1 × NICE Era INTI2 Remote Control NICE-INTI2

Remote control with two buttons for operating a gate automatically from a distance. You can use it to control two devices or send two different commands to one device.

 Details
NICE OXIBD remote control receiver 1 × NICE OXIBD remote control receiver NICE-OXIBD

Radio signal receiver for remote controls. Supports two-way communication with selected remote control models. Range of up to 200m with an antenna.

 Details
NICE EPM photocells with conventional wiring 1 × NICE EPM photocells with conventional wiring NICE-EPM

NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate hitting an obstacle.

 Details
Installation manual for the NICE TOO gate operator 1 × Installation manual for the NICE TOO gate operator Download 

Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls.

Compatible accessories

We also recommend purchasing the following optional accessories compatible with the operator:

What Why Type
Control unit

The operator's control electronics.
Flashing beacon Flashes to indicate gate movement—ideal for exits with limited visibility. Also includes an antenna for a longer remote-control range.
  • LED beacon with antenna ELAC

Alternatively, all beacons with a 230V power supply, including models from other manufacturers.
Photoelectric safety sensors

Detect obstacles while the gate is closing and stop it—so the gate won't hit a car or a person.

The control unit MC800 supports connecting multiple pairs of relay-type or BlueBus photoelectric safety sensors. However, the two types cannot be mixed—all pairs must be the same type.
  • Wired relay type – EPM
  • Relay type with reflector – EPMOR
  • Wired anti-vandal relay type – EPMA
  • Wired BlueBus type – EPMB, EPLB, EPSB
  • BlueBus type with reflector – EPMORB
  • Wireless BlueBus type – EPMOW
  • Adjustable wired BlueBus type – F210B
  • Wireless BlueBus type – FT210B
  • Wired BlueBus type – EPMOB
Remote control For operating the gate remotely.
Receiver

For operating the gate remotely.

Antenna

For improved remote-control range.
  •  integrated into the beacon ELDC
  • standalone antenna ABFKIT
Keypad

If you forget your remote control, or if many vehicles or people need access and you don't want to give everyone a remote or open the gate yourself.
Key switch

For operating the gate with a key using a switch connected to the operator by cable from any location.
  • surface-mounted, with a standard cylinder EKS
  • surface-mounted, with a European cylinder, EKSEU
  • recessed, with a standard cylinder EKSI
  • recessed, with a European cylinder EKSIEU
Card readers

Control the operator by presenting a card or key fob to the card reader.
  • ERA Transponder Reader ETPB
Electric locks

Safety electric locks are synchronised with the operator via the control unit. When an operator command is sent, the electric lock is released first, and only then does the gate start to open. Once the gate closes, the electric lock is engaged again. They are required for leaves longer than 3.5 m.

OPERATOR TECHNICAL SPECIFICATIONS NICE TOO TOO3000

Power supply (V) 230
Max. weight of one leaf (kg) 300
Max. length of one leaf (m) 3
IP rating (IP) 54
Frequency (Hz) 50
Operating temperature (°C) -20 to +50
Dimensions of one arm (mm) 700x100x177
Weight of one arm (kg)  6

Instructions for pairing remote controls:

 Instructions for pairing and deleting remote controls, and for adding them to or removing them from the NICE operator receiver's memory

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf, 3 m/300 kg, with photocells

Product: NICE TOO TOO3000 drive kit for a single-leaf gate – one leaf, 3 m/300 kg, with photocells
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page