Sliding gate operator kit for gates up to 2500 kg/18 m – NICE Run RUN2500I (B)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€1,162.60 including VAT
| Weight |
|---|
| 26 kg |
Description of Sliding gate operator kit for gates up to 2500 kg/18 m – NICE Run RUN2500I (B)
NICE Run RUN2500I drive with a built-in inverter that converts 230 V to 400 V. Suitable for intensive use. It is designed for sliding gates weighing up to 2500kg and a passage width of up to 18 m. It has a mechanical stop switch. The drive is non-reversible. Detailed technical specifications ». Download the manual ».
Inverter allows a three-phase motor to be powered and activated by a single-phase 230 Vac supply, adjusting the frequency to control the drive speed from a minimum of 8.2 m/min to a maximum of 15.4 m/min. During the drive's deceleration phase, the inverter, which communicates with the control unit, increases the torque, thereby boosting performance and reducing the risk of the drive stopping as it decelerates at the end of the cycle. So, to put it in plainEnglish, if you want a two-and-a-half-ton gate to slow down at the end, the RUN2500 may act up, so use the RUN2500I.
| Set NICE-RUN2500I-B contains: | ||||
|---|---|---|---|---|
|
1 × | NICE Run RUN2500I drive | NICE-RUN2500I-A | |
|
NICE Run RUN2500I electromechanical gate operator with a built-in control unit, suitable for gates weighing up to 2500kg and with a leaf length of up to 18m.
|
Details 
|
|||
|
1 × | NICE RUA2 control unit | NICE-RUA2 | |
|
Control unit for the NICE RUN2500I drive. |
Details
|
|||
|
1 × | NICE MYGO4 - four-channel remote control | NICE-MYGO4 | |
|
NICE MYGO4 - four-channel remote control, rolling code, 433.92 MHz |
Details
|
|||
|
1 × | NICE OXIBD remote control receiver | NICE-OXIBD | |
|
Radio signal receiver for remote controls. Supports two-way communication with selected remote control models. Range of up to 200m with an antenna. |
Details
|
|||
|
1 × | Installation Manual |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
2 pcs. release keys
End stops
Drive features NICE RUN RUN2500I
The drive is compact, safe and practical, making it ideal for both residential and commercial use. Impact-resistant cover, body made of epoxy-coated aluminium alloy.
The drive is suitable for automating sliding gates weighing up to 2500kg with a leaf length of 18 m. These figures apply under conditions specified by the manufacturer, such as weather conditions, temperature variations, gate rigidity and, above all, smooth gate movement. This is not always achievable or within our control, so we recommend using the NICE Run RUN2500P drive for gates operating at an ideal level of 80% of these values. See the Choosing a drive chapter for more information.
Very user- friendly BlueBUS allows you to power and control up to 7 pairs of photocells using a two-core cable.
The temperature sensor adjusts the drive's pulling force according to the weather conditions. The drive also includes a thermal fuse.
Adjustable speed,, force and pause time for automatic drive closing, and much more; see Programming.
Diagnostics using a warning beacon.
The gear wheel module 4 is compatible with the rack available in our range.
Run2500P drive functions "The slave unit" ensures automatic synchronisation of two motors. This means you can automate two sliding gates that move towards each other.
The NICE Run RUN2500I drive is an electromechanical operator suited to Slovakia's climate and meets all European safety standards.
You can find a detailed wiring diagram and more technical information on the NICE Run RUN2500I drive's product page, or in the manual..
Drive technical specifications NICE RUN RUN2500I
| Power supply | 230 Vac / 50 Hz |
|---|---|
| Current draw | 3,7 A |
| Protection rating | IP44 |
| Power | 650 W |
| Speed | 0,26 m/s |
| Force | 1660 N |
| Duty cycle | 56 cycles/hour |
| Max. gate weight | 2500 kg |
| Operating temperature | -20 to +50 °C |
| Gear module | 4 |
Accessories compatible with the NICE Run RUN2500I drive
We also recommend purchasing compatible optional accessories for the drive, or choosing one of our pre-assembled, discounted kits:
| What | Why | Type | Included in the kit? |
|---|---|---|---|
| Warning beacon | The beacon flashes to indicate gate movement—useful at exits with poor visibility. It also has a built-in antenna for increased remote-control range. | - Lucy (LUCYB) - Moonlight (MLBT, ELB) |
No. |
| Photocells | When closing, they detect an obstacle and stop the gate, preventing it from hitting a car or a person. | - MoonBUS (MOFB,EPMB) | No. |
| Transmitter |
For remote control of the gate. |
- MYGO4 - Era One (ON2E, ON4E) |
Yes, MYGO4. |
| Receiver | Required for remote control of the gate. | - OXI - SMXI |
Yes, OXIBD. |
| Antenna | For better remote control range. | - integrated into the warning light LUCYB, MLBT - ABFKIT antenna only |
No. |
| Keypad | If you forget your remote control, or if many vehicles or people visit and you don't want to give everyone a remote control or have to open the gate yourself. | - MOTXR (wireless) | No. |
| Key switch | To operate the gate with a key using a switch connected to the drive by cable at any location. | - MOSE | No. |
| Rack | Essential for the gate operator to work—without a rack, the operator cannot move the gate. | - nylon LZ-1 with steel reinforcement - steel LZ-2 |
No. |
Compatibility chart for NICE Run gate operators
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
