Drive kit for sliding gates up to 2500kg/18m - NICE Run RUN2500I (C)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€1,226.11 including VAT
| Weight |
|---|
| 26 kg |
Description of Drive kit for sliding gates up to 2500kg/18m - NICE Run RUN2500I (C)
NICE Run RUN2500I gate operator with a built-in inverter that converts 230 V to 400 V. Suitable for intensive use. It is designed for sliding gates weighing up to 2500kg and a clear opening width up to 18 m. It has a mechanical stop switch. The gate operator is non-reversible. Detailed technical specifications ». Download the manual ».
Inverter allows a three-phase motor to be powered and activated using single-phase 230 Vac current, by adjusting the frequency to control the gate operator’s speed from a minimum of 8,2 m/min. to a maximum of 15,4 m/min. During the gate operator’s deceleration phase, the inverter, which communicates with the control unit, increases torque, thereby boosting performance and reducing the risk of the gate operator stopping while decelerating at the end of the cycle. So, in plain Englishif you want a two-and-a-half-ton gate to slow down at the end, the RUN2500 may act up, so use the RUN2500I.
| Set NICE-RUN2500I-C contains: | ||||
|---|---|---|---|---|
|
1 × | NICE Run RUN2500I drive | NICE-RUN2500I-A | |
|
NICE Run RUN2500I electromechanical gate operator with a built-in control unit, suitable for gates weighing up to 2500kg and with a leaf length of up to 18m.
|
Details 
|
|||
|
1 × | NICE RUA2 control unit | NICE-RUA2 | |
|
Control unit for the NICE RUN2500I drive. |
Details
|
|||
|
1 × | NICE MYGO4 - four-channel remote control | NICE-MYGO4 | |
|
NICE MYGO4 - four-channel remote control, rolling code, 433.92 MHz |
Details
|
|||
|
1 × | NICE OXIBD remote control receiver | NICE-OXIBD | |
|
Radio signal receiver for remote controls. Supports two-way communication with selected remote control models. Range of up to 200m with an antenna. |
Details
|
|||
|
1 × | NICE EPMB - Era Photocell Medium - photocells with BlueBUS connection | NICE-EPMB | |
|
Safety photocells are installed on either side of the opening. They create an infrared beam which, when interrupted by a car or pedestrian, for example, sends a signal to the drive to stop the gate or prevent it from opening. |
Details
|
|||
|
1 × | Installation Manual |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
2 pcs. release keys
End stops
Drive features NICE RUN RUN2500I
The drive is compact, safe and practical, making it ideal for both residential and commercial use. Impact-resistant cover, with an epoxy-coated aluminium alloy housing.
The drive is suitable for automating sliding gates weighing up to 2500kg, with a gate leaf length of 18 m. These values apply under conditions specified by the manufacturer, such as weather conditions, temperature variations, gate rigidity and, above all, smooth gate movement. These conditions cannot always be achieved or controlled, so we recommend using the NICE Run RUN2500P drive ideally with gates rated at 80% of these values. See the Choosing a drive chapter for more information.
Very user- friendly BlueBUS allows you to power and control up to 7 pairs of photocells using a two-core cable.
The temperature sensor adjusts the drive's pulling force according to the weather conditions. The drive also includes a thermal fuse.
Adjustable speed,, force and pause time for the drive's automatic closing function, and much more; see Programming.
Diagnostics using a warning beacon.
The gear module 4 is compatible with the gear rack available in our range.
Run2500P drive functions "The slave unit" ensures automatic synchronisation of two motors. This means that two opposing sliding gates can be automated.
The NICE Run RUN2500I is an electromechanical drive suited to Slovakia's climate and compliant with all European safety standards.
You can find a detailed wiring diagram and further technical information on the NICE Run RUN2500I drive's product page, or in the manual..
Drive specifications NICE RUN RUN2500I
| Power supply | 230 Vac / 50 Hz |
|---|---|
| Current draw | 3,7 A |
| Protection rating | IP44 |
| Power | 650 W |
| Speed | 0,26 m/s |
| Force | 1660 N |
| Duty cycles | 56 cycles/hour |
| Max. gate weight | 2500 kg |
| Operating temperature | -20 to +50 °C |
| Gear module | 4 |
Accessories compatible with the NICE Run RUN2500I drive
We also recommend purchasing compatible optional accessories for the drive, or choosing one of our pre-assembled discounted kits:
| What | Why | Type | Included in the kit? |
|---|---|---|---|
| Warning beacon | The warning beacon flashes to indicate gate movement—useful at exits with limited visibility. It also has a built-in antenna for greater remote-control range. | - Lucy (LUCYB) - Moonlight (MLBT, ELB) |
No. |
| Photocells | When closing, they detect obstacles and stop the gate—preventing it from hitting a car or a person. | - MoonBUS (MOFB,EPMB) | Yes, EPMB. |
| Transmitter |
For remote control of the gate. |
- MYGO4 - Era One (ON2E, ON4E) |
Yes, MYGO4. |
| Receiver | Required for remote control of the gate. | - OXI - SMXI |
Yes, OXIBD. |
| Antenna | For better remote-control range. | - integrated into the warning light LUCYB, MLBT - ABFKIT antenna only |
No. |
| Keypad | If you forget your remote control, or if many vehicles or people visit and you don't want to give everyone a remote control or open the gate yourself. | - MOTXR (wireless) | No. |
| Key switch | For operating the gate with a key using a switch connected to the drive by cable at any location. | - MOSE | No. |
| Rack | Required for the drive automation itself—the drive cannot move the gate without a rack. | - nylon LZ-1 with steel reinforcement - steel LZ-2 |
No. |
Compatibility table for NICE Run drives
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
