Drive kit for sliding gates up to 2500 kg/18 m – NICE Run RUN2500 (C)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€1,204.51 including VAT
| Weight |
|---|
| 26 kg |
Description of Drive kit for sliding gates up to 2500 kg/18 m – NICE Run RUN2500 (C)
NICE Run RUN2500 gate operator is designed for sliding gates with a weight of up to 2500kg and a passage width of up to 18 m. It has an electromechanical limit switch. The operator is non-reversible. Detailed technical specifications ». Download the manual ».
| Set NICE-RUN2500-C contains: | ||||
|---|---|---|---|---|
|
1 × | NICE Run RUN2500 drive | NICE-RUN2500-A | |
|
NICE Run RUN2500 electromechanical operator with a built-in control unit, suitable for gates weighing up to 2500kg and with a leaf length of up to 18m.
|
Details 
|
|||
|
1 × | NICE RUA1 control unit | NICE-RUA1 | |
|
Control unit for the NICE RUN drive |
Details
|
|||
|
1 × | NICE MYGO4 - four-channel remote control | NICE-MYGO4 | |
|
NICE MYGO4 - four-channel remote control, rolling code, 433.92 MHz |
Details
|
|||
|
1 × | NICE OXIBD remote control receiver | NICE-OXIBD | |
|
Radio signal receiver for remote controls. Supports two-way communication with selected remote control models. Range of up to 200m with an antenna. |
Details
|
|||
|
1 × | NICE EPMB - Era Photocell Medium - photocells with BlueBUS connection | NICE-EPMB | |
|
Safety photocells are installed on either side of the opening. They create an infrared beam which, when interrupted by a car or pedestrian, for example, sends a signal to the drive to stop the gate or prevent it from opening. |
Details
|
|||
|
1 × | Installation Manual |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
2 pcs. release keys
End stops
Features of thedrive NICE RUN RUN2500
The drive is compact, safe and practical, making it ideal for both residential and commercial use. Impact-resistant housing, aluminium-alloy body with an epoxy coating.
The drive is suitable for automating sliding gates weighing up to 2500kg, with a gate leaf length of up to 18 m. These figures apply under the conditions specified by the manufacturer, including weather conditions, temperature variations, gate rigidity and, above all, smooth gate movement. These conditions cannot always be achieved or controlled, so we recommend using the NICE Run RUN2500 drive with gates operating at ideally 80% of these limits. See the Choosing a drive chapter for more information.
Very user- friendly BlueBUS allows you to power and control up to 7 pairs of photocells using a two-core cable.
The temperature sensor adjusts the drive's pulling force according to the climatic conditions. The drive also includes a thermal fuse.
Adjustable speed,, force and pause time for automatic gate closing, and much more; see Programming.
Diagnostics using a warning beacon.
The gear module 4 is compatible with the rack in our range.
Run2500 drive features "The slave unit" automatically synchronises two motors. This means that two sliding gates moving towards each other can be automated.
The NICE Run RUN2500 is an electromechanical drive designed for the climatic conditions in Slovakia and complies with all European safety standards.
The RUN RUN2500 in pictures
| manual release | control unit | wiring diagram |
|---|---|---|
 |
 |
 |
| Instructions for manual release > |
Programming the drive > |
Detailed wiring diagram > |
For a detailed wiring diagram and more technical information, see on the page for the NICE Run RUN2500 drive itself, or in the manual..
Drive technical specifications NICE RUN RUN2500
| Power supply | (Vac 50 Hz) | 230 |
| Current draw | (A) | 3.8 |
| Protection rating | (IP) | 44 |
| Power | (W) | 870 |
| Speed | (m/s) | 0.17 |
| Force | (N) | 1390 |
| Max. gate weight | (kg) | 2500 |
| Operating temperature | (°C) | -20 to +50 |
| Insulation class | 1 | |
| Gear module | 4 |
Accessories compatible with the NICE Run RUN2500 drive
We also recommend purchasing compatible optional accessories for the drive, or choosing one of our pre-assembled at a special price:
| What | Why | Type | Included? |
|---|---|---|---|
| Beacon | The beacon signals gate movement by flashing, making it suitable for exits with limited visibility. It also has a built-in antenna for greater remote-control range. | - Lucy (LUCYB) - Moonlight (MLBT, ELB) |
No. |
| Photoelectric sensors | They detect an obstacle while the gate is closing and stop it from moving, so the gate won’t hit a car or anyone. | - MoonBUS (MOFB,EPMB) | Yes, EPMB. |
| Transmitter |
For remote gate control. |
- MYGO4 - Era One (ON2E, ON4E) |
Yes, MYGO4. |
| Receiver | Required for remote gate control. | - OXI - SMXI |
Yes, OXIBD. |
| Antenna | For better remote-control range. | - integrated into the warning light LUCYB, MLBT - ABFKIT antenna only |
No. |
| Keypad | If you forget your remote, if lots of vehicles or people need access, or if you don’t want to give everyone a remote or have to open the gate yourself. | - MOTXR (wireless) | No. |
| Key switch | For operating the gate with a key via a switch wired to the drive, which can be installed anywhere. | - MOSE | No. |
| Rack | Required for the drive automation itself—without a rack, the drive has nothing to move the gate with. | - nylon LZ-1 with steel reinforcement - steel LZ-2 |
No. |
Manuals and documents for download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
