Aluminium U-shaped retaining profile for slats, 20.5 mm wide, with a wood-effect textured finish in beech


Product availability: In stock

We normally dispatch goods within 24 hours.

Aluminium U-shaped retaining profile for slats, 20.5 mm wide, with a wood-effect textured finish in beech Aluminium U-shaped retaining profile for slats, 20.5 mm wide, with a wood-effect textured finish in beech
AL-UP4-DS-6
in stock
€41.83 excluding VAT
€51.46 including VAT

 pcs
Length [m] Weight
6m +/- 5mm 2,29 kg
AL-UP4-DS-3
in stock
€20.92 excluding VAT
€25.73 including VAT

 pcs
Length [m] Weight
3m +/- 5mm 1,15 kg
AL-UP4-DS-2
in stock
€13.95 excluding VAT
€17.16 including VAT

 pcs
Length [m] Weight
2m +/- 5mm 0,76 kg

Description of Aluminium U-shaped retaining profile for slats, 20.5 mm wide, with a wood-effect textured finish in beech

Aluminium fixing profile for fence slats is U-shaped,with a textured wood-effect finish, making it suitable for installation between posts on a gate, fence or other opening. The profile's external width is 20.5 mm, the projection is 22 mm and the length is 2 m, 3 m or 6 m.

On the outside of the profile there are recessed grooves for accurately positioning the screws horizontally. The ideal screws are stainless steel self-tapping screws with countersunk heads, DIN 7982, 3.9x19 mm

FIXING PROFILE COMPATIBILITY:

The profile is suitable for vertical installation of the following slat models:

Aluminium slats with a wood-effect finish:

Aluminium slats without a finish -

Aluminium slats in anthracite -

INSTALLATION METHOD FOR PARALLELOGRAM-SHAPED ALUMINIUM SLATS:

The fixing U-profile has a recessed groove into which you can pre-drill holes for the screws. Inside the hollow slat, there are guide grooves on the sides that the screw engages with.

The parallelogram-shaped fence slat and a fixing U-profile in the same colour and finish create a coordinated, modern look.

The parallelogram-shaped slat can also be installed at an angle to create a louvred pattern, but you need to use a 50mm-wide fixing profile.

parallelogram-shaped slat parallelogram slat
parallelogram slat parallelogram slat

INSTALLATION METHOD FOR RECTANGULAR ALUMINIUM SLATS:

For vertical installation, slide the fixing profile into the slat and screw it in place. A recessed groove runs down the centre of the outside of the fixing profile. You can pre-drill screw holes in it at intervals to suit your preferred pattern. Once the slat is fitted into the fixing profile, the screw engages with the guide groove inside the slat.

rectangular slat rectangular slat
 rectangular slat  rectangular slat

FINISH

Aluminium is an excellent material that resists corrosion and weathering and has a long service life. The slat is made from EN AW-6060 T66 aluminium and supplied with a textured wood-effect finish in beech.

The profile is powder-coated. After application, the powder coating is cured in an oven.

This finish offers a long service life and resistance to UV radiation and yellowing.. It is designed for use in construction, where lasting colour and gloss are essential.

Please note

The manufacturing process requires at the ends of profiles with a powder-coated finish approximately 1 cm of profile to be left at each end for holding during coating. At the ends of the profile there is a small hole, which you should allow for. This hole does not interfere with installation, but the end can easily be cut off if necessary.

Representative photo

TECHNICAL SPECIFICATIONS OF THE ALUMINIUM FIXING PROFILE FOR FENCE SLATS:

Material: natural aluminium (EN AW-6060 T66)
Finish: textured wood effect in beech
Size: 20.5x22 mm
Length: 2 000 mm, 3 000 mm, 6 000 mm
Weight: 0.64 kg, 0.96 kg, 1.92 kg

How can I order this item?

Choose the option that suits you:

  1. order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
  2. order by email: place your order at [email protected]

Ask us anything about Aluminium U-shaped retaining profile for slats, 20.5 mm wide, with a wood-effect textured finish in beech

Product: Aluminium U-shaped retaining profile for slats, 20.5 mm wide, with a wood-effect textured finish in beech
Name:
Email:
Phone:
Message:
This page is protected by Google reCAPTCHA.
Print page Print page