NICE NKSL400 (E) sliding gate operator kit for gates up to 400 kg/6 m
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€813.17 including VAT
| Weight |
|---|
| 17 kg |
Description of NICE NKSL400 (E) sliding gate operator kit for gates up to 400 kg/6 m
The compact Nice NKSL400 electromechanical gate operator is suitable for sliding gates weighing up to 400kg or with a clear opening width of 6m. The operator is supplied without coversand is suitable for installation directly inside the gate post.
Its dimensions 131x135x405mm make it suitable for concealed installation inside a post 150x150x4mm and larger (see drawing).
Thanks to the built-in internal limit stops there is no need to install limit stops on the rack. The stops can be set very quickly with just one operating cycle while the gate is disengaged.
The operator can be released from either side of the post, or remotely using the accessories NICE KIO and NICE KA1 as well.
The operator also includes a temperature sensorand automatically adjusts the force applied to compensate for temperature changes—for example, it automatically increases the force at low temperatures.
The operator is supplied with the control unit NKA3R10 fitted directly inside the operator. Popular practical features of the control unit:
- control by remote controls via a radio receiver
- option to set automatic closing after a specified time or after a vehicle passes through the photocells
- inputs for wired open, close and step-by-step commands
- 24V DC output for additional devices
- programmable partial-opening distance for pedestrian access
- adjustable force and speed
- manual release of the operator in the event of a power failure
- option to connect two operators with automatic synchronisation for automating opposing sliding gates.
A backup power supply can be connected to the operator as an optional accessory NICE PS124, enabling several operating cycles even during a power outage. There is enough space inside the operator housing to fit the backup power supply.
In principle, the control unit NKA3R10 is technologically very similar to the operator NICE Robus RB400.
The operator's pinion has a rack module 4.
| The set includes: | NICE-NKSL400-E | |||
|---|---|---|---|---|
 |
1 × | NICE Slight NKSL400 operator | NICE-NKSL400 | |
|
NICE Slight SLH400 electromechanical operator with NKA3R10 control unit, for gates weighing up to 400 kg and with a gate leaf length of up to 6m. |
Detail  |
|||
 |
1 × | NICE MYGO4 remote control | NICE-MYGO4 | |
|
Four-button remote control for opening a gate automatically from a distance. It can control four devices, or send four different commands to a single device. Compatible with all NICE operators that use O-Code rolling code technology (the 72-bit code allows 4.7 quadrillion combinations, making it virtually impossible to misuse) and an LED indicator for the transmitted signal. |
Detail |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the clear opening. They create an infrared beam which, when interrupted by a car or pedestrian, for example, sends a signal to the operator to stop the gate or prevent it from opening. |
Detail |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Radio receiver for signals from remote controls. |
Detail |
|||
 |
4 × | Rack with metal reinforcement |
LZ-1-1 | |
|
A sliding gate with a rack mounted in a fixed position is driven by the operator's pinion through a rack-and-pinion mechanism. |
Detail |
|||
 |
1 × | NICE Slight NKSL400 installation manual | ||
|
Installation manual for successful setup, with wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
| 1 × | Installation accessories | |||
|
Operator installation components |
||||
Recommended accessories:
- NICE Era Photocell photocells EPMB or EPSB (slim version)
- NICE remote controls ideally from the MYGO, Era One or Era Inti ranges
- Nylon rack with steel reinforcement
Post cutout drawing:
Although it may look complicated at first, it’s not that difficult: cut a 7 cm diameter hole in the front of the 150x150 square hollow section for the gear wheel, plus four smaller holes for mounting the drive. Cut a square opening in the back to allow access to the drive, and, if required, holes in the sides for manually releasing the drive. Cover the opening cut in the back with a bent sheet-metal plate cut to the required size. See the layout drawings of the square hollow section:
360°:
NICE Naked Sliding NKSL400 drive manual
| NICE Naked Sliding NKSL400 drive manual |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
