Kit for building a sliding gate up to 6.5 m with a NICE drive and accessories
TOP| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
| Available variant types for this product Kit for building a sliding gate up to 6.5 m with a NICE drive and accessories | ||
| Wheel type: |
You can choose wheels with a bracket, recessed, or recessed with a support. |
|
|---|---|---|
|
Wheels
for bolting with bracket Recessed
screw-in wheels Wheels
welding recessed |
||
| Guide type: larger set: |
Top guide Use it if the infill of your gate (e.g. wooden slats, polycarbonate, expanded metal) does not extend above the gate. Secure it to the existing fence or to an alignment post. |
|
|
Side
guide Top
guide |
||
€1,186.43 including VAT
| Weight |
|---|
| 45 kg |
Description of Kit for building a sliding gate up to 6.5 m with a NICE drive and accessories
Note:The SET is price-discounted compared with the individual components . On request, we can adjust the contents of the SET and apply an appropriate discount. If you have a specific request or would like some advice, contact us.
| The set includes: | SADA-18 | |||
|---|---|---|---|---|
 |
2 × | Ø100 mm wheel | ||
|
Choose from three versions:
|
Detail  |
|||
 |
2 × | 6 m long U-shaped track | KLB-KOL16-US-ZN6 | |
|
Sliding gate guide track. |
Detail |
|||
 |
1 × | Bottom stop with base | KLB-SD-2 | |
|
Stops the sliding gate. |
Detail |
|||
 |
1 × | Adjustable top stop, 40–99 mm | UB-40-100 | |
|
Top stop for sliding gates with an adjustable width of 40–99 mm |
Detail |
|||
 |
1 × | Gate guide | ||
|
Gate guide for vertical stabilisation of the gate in the lateral direction. Choose either a top-mounted (1 × VVR-2-G) or side-mounted guide (2 × BR-43G). |
Side-mounted Top-mounted |
|||
 |
1 × | NICE Robus 600 operator | NICE-RB600 | |
|
NICE Robus 600 electromechanical operator with an RBA3R10 control unit, suitable for gates weighing up to 600 kg. |
Detail |
|||
 |
1 × | NICE Era One ON2E remote control | NICE-ON2E | |
|
Two-channel remote control from the NICE Opera range, compatible with all NICE operators using O-Code rolling-code technology. This remote control lets you operate two NICE devices, or, with a NICE FloX2R receiver, a device from another brand. |
Detail |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the passageway. They emit an infrared beam which, when interrupted by a vehicle or pedestrian, for example, sends a signal to the operator to stop the gate or prevent it from opening. |
Detail |
|||
 |
1 × | NICE ELDC LED warning light with antenna | NICE-ELDC | |
|
NICE LED flashing ELDC warning light made of impact-resistant polycarbonate, with a built-in antenna to extend the remote control range (up to 150 m). |
Detail |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Receiver for radio signals from remote controls. |
Detail |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it disengages the operator's gear so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Robus 600 installation manual | ||
|
Installation manual for a successful setup, with wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
| 1 × | Operator installation accessories | |||
|
Operator installation components, height adjustment screws, mounting plate, anchor caps, operator sensor stops. |
||||
 |
6 m | Reinforced toothed rack | LZ-1-6 | |
|
The sliding gate, with the rack statically mounted, is moved by the operator's pinion through a rack-and-pinion drive. |
Details |
|||
All metal components are surface-protected by galvanising. Go to the KIT components description.
Delivery KITS
All KITS for sliding gates are in stock, goods are dispatched within 48 hours. We will deliver the KIT to you by courier directly to your address. You can pay cash on delivery (to the driver when you receive the goods) or by bank transfer in advance. Another option is to collect the kit in person in Nové Mesto nad Váhom.
Ordering the KIT
You can order the KIT:
| 1. By email or phone, contact us. | |
|
2. Through the shopping basket:
|
Sliding gate installation using KIT components
The sliding gate kit comes with an installation drawing showing the recommended dimensions for the concrete foundation and example dimensions for track-mounted gates.
We'd be happy to advise you on the contents of your kit or on installation. You can:
| Fill in the form | Call or write to us |
|---|---|
| Ask a sales adviser | Contact us. |
In the photo gallery you'll find customer projects for sliding gates built using our components.
Extended warranty
All metal components in this KIT are covered by an 36-month extended warranty. The warranty covers not only metal components but also nylon parts.
All and automation electronics in our store are covered by the standard warranty of 24 months.
The invoice supplied with your delivery serves as the warranty certificate.
Description of the KIT for building a cantilever sliding gate
Complete KIT for building a track-mounted sliding gate for a clear opening width of up to 6.5 m and a maximum total gate weight of 300 kg track-mounted gate. The complete kit is available at a discounted price. On request, we can supply an additional track to achieve a clear opening wider than 6.5 m.
The kit also includes a complete set for automating a sliding gate: gate operator and electronic accessories (remote controls, beacon, photocells).
The parts in this KIT are selected so that no additional components need to be purchased for a manually operated gate (although you can add to the kit, for example, a hook lock or upper stop).
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
