Kit for building a cantilever sliding gate up to 6.5 m with NICE Robus RBS600 operator
TOP NEW| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
| Available variant types for this product Kit for building a cantilever sliding gate up to 6.5 m with NICE Robus RBS600 operator | ||
| Roller type: |
You can choose the rollers nylon or metal. Nylon rollers allow the gate to carry a heavy load, prevent wear on the C-profile and ensure quiet gate operation. |
|
|---|---|---|
|
Nylon
rollers Metal
rollers |
||
| Guide type: larger set: |
Top guide Use it if the infill of your gate (e.g. wooden slats, polycarbonate, expanded metal) does not extend above the gate. Secure it to the existing fence or to an alignment post. |
|
|
Side
guide Top
guide |
||
€1,249.54 including VAT
| C-channel dimensions | Weight |
|---|---|
| 80×80×5 | 111 kg |
Description of Kit for building a cantilever sliding gate up to 6.5 m with NICE Robus RBS600 operator
Component kit for building a cantilever sliding gate in the highest quality with highly reliable load-bearing rollers.
Note: The KIT is more cost-effective than purchasing the components individually and offered at a discounted price. We can customize the KIT contents on request and apply an appropriate discount. If you have a specific request or would like some advice, contact us.
New!
We currently offer C-profile 80x80x5, 9 metres in total length (one piece).
This profile is available for in-store collection only at our store in Nové Mesto nad Váhom. For more information, please feel free to contact.
| The kit contains: | SADA-12 | |||
|---|---|---|---|---|
 |
2 × | Eight-bearing-roller carriage | V-07-1 | |
|
You can choose nylon or metal rollers. Nylon rollers support heavy gate loads, prevent wear to the C-profile and ensure quiet gate operation. Nylon and metal rollers are the same price |
Detail  |
|||
 |
6+3 m | C-profile, unfinished | CP-80-6 + CP-80-3 |
|
|
A heavy-wall C-shaped guide profile welded to the underside of the gate, allowing it to run on carriages anchored in a concrete foundation. Unfinished, raw steel. C-profiles can be joined by welding. |
Detail |
|||
 |
1 × | End roller | SN-1-80 | |
|
The end roller is fitted at the start of the C-profile and runs into the bottom catch mounted on the closing post, relieving the gate when it is closed. |
Detail |
|||
 |
1 × | Bottom catch | DK-1-80 | |
|
A catch mounted at the bottom of the closing post. It relieves the compressive and tensile forces acting on the carriages when the gate is closed. |
Detail |
|||
 |
1 × | Gate guide | ||
|
A gate guide for vertical stabilization of the gate in the lateral direction. Choose either a top guide (1 × VVR-2-G) or a side guide (2 × BR-43G). |
Side-mounted Top-mounted |
|||
 |
1 × | Metal C-profile end cap | SK-1-80 | |
|
The sliding gate C-profile end cap is fitted to the start and, if required, the end of the guide C-profile. It slides into the C-profile and is secured with a clamping plate. |
Detail |
|||
 |
1 × | NICE Robus RBS600 motor only | NICE-RBS600-A | |
|
NICE Robus RBS600 gate operator for gates with a leaf weight of up to 600 kg and a leaf length of 8m. The operator includes a built-in NICE MCU1 control unit with an integrated receiver. |
Detail |
|||
 |
1 × | NICE MYGO4 remote control | NICE-MYGO4 | |
|
Four-button remote control for opening a gate automatically from a distance. Use it to control four devices or send four different commands to a single device. Compatible with all NICE operators using O-Code rolling code technology (the 72-bit code allows 4.7 quadrillion combinations, making it practically impossible to misuse) and an LED signal transmission indicator. |
Detail |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the opening. They create an infrared beam. If it is interrupted, for example by a car or pedestrian, a signal is sent to the operator to stop the gate or prevent it from opening. |
Detail |
|||
 |
1 × | NICE ELDC LED beacon with antenna | NICE-ELDC | |
|
NICE LED flashing warning light ELDC, made of impact-resistant polycarbonate with a built-in antenna for greater remote-control range (up to 150 m). |
Detail |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it releases the drive gear so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Robus RBS 600 installation manual | ||
|
Installation manual for a successful installation, with wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
| 1 × | Operator installation accessories | |||
|
Operator installation components, height-adjustment screws, mounting plate, anchor caps and limit stops for the operator sensor. |
||||
 |
6 m | Rack with metal reinforcement | LZ-1-6 | |
|
The sliding gate, fitted with a fixed rack, is moved by the operator's pinion through the rack-and-pinion drive. |
Detail |
|||
 |
2 pcs. | Inductive limit switch | ||
|
The inductive limit stops for the operator switch are mounted on the rack and define the gate's travel distance. |
||||
You may also want to add a BiDi-WiFi module (optional accessory). It lets you control the gate using your phone via MyNice and use MyNice Pro to program the operator and change its supported advanced settings.
All metal components, except the C-profile are zinc-coated for surface protection. Go to the KIT component descriptions.
Delivery KIT
All sliding gate KITS are in stock. We will deliver the KIT by courier directly to your address. You can pay cash on delivery (to the driver when the goods are delivered) or by bank transfer in advance. Another option is to collect the kit in person in Nové Mesto nad Váhom.
Ordering the KIT
You can order the KIT:
| 1. By email or phone, contact us. | |
|
2. Through the cart:
|
Sliding gate installation using KIT components
Your sliding gate kit will include an installation drawing with recommended concrete foundation dimensions and example dimensions for cantilever gates.
We’d be happy to advise you on the composition of your kit or its installation. You can:
| Fill in the form | Call or write to us |
|---|---|
| Ask a sales representative for advice | Contact us. |
In the gallery you can see customer installations of sliding gates built using our components.
Extended warranty
All metal components in this KIT are covered by a 36-month extended warranty. The warranty covers not only metal components but also nylon parts and especially bearing rollers carriages, which form the basis of the cantilever gate mechanism.
All automation electronics in our store are covered by the standard warranty of 24 months.
The invoice included with your delivered goods serves as the warranty certificate.
Description of the KIT for building a cantilever sliding gate
Complete KIT for building a cantilever sliding gate for a passage width of up to 6.5 m and a maximum total weight of 600 kg cantilever gate. A complete kit with 6 + 3 metres of C-profile is offered at a discounted price. On request, we can supply the C-profile cut to whole-metre lengths; it can also be joined by welding to achieve a clear opening wider than 6.5 m.
THE SET includes load-bearing trolleys for cantilever gates with eight rollers fitted with heavy-duty bearings. The trolleys have adjustment and tilt capabilities, with the adjustment used to fine-tune the gate's clearance from the ground, and the tilt ensuring that all bearings are evenly loaded in both tension and compression. The trolleys are supplied with mounting plates.
The set also includes bottom stop and guide roller, which reduce stress on the gate and also serve as stops and safety features. The components in this SET have been selected so that no additional parts need to be purchased (although you can add to the set, for example, top stop).
The set also includes a complete kit for automating a sliding gate: gate operator and electronic accessories (remote controls, flashing light, photocells).
C-profile is welded to the bottom frame of the gate. We recommend using a bottom gate-frame section of at least 80x40x2mm; use 40x40, 60x40 or 80x40 sections for the rest of the frame, depending on the clear opening, the overall gate-leaf length and the intended weight—we can advise you. The gate frame must be sturdy and stable. Once you have the gate frame, mount the trolleys on a concrete foundation (use steel anchors, chemical anchors, or cast the trolleys directly into the foundation on threaded rods). We will send you the concrete foundation dimensions, along with other recommended procedures, together with the products. Alternatively, contact us, and we'll be happy to advise you.
More detailed information about cantilever gates and the components used to assemble them can be found in the section Common Issues When Building a Sliding Gate.
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
