Drive kit for sliding gates up to 400 kg/6 m NICE Slight SLH400 (D)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€710.18 including VAT
| Weight |
|---|
| 12 kg |
Description of Drive kit for sliding gates up to 400 kg/6 m NICE Slight SLH400 (D)
The compact Nice Slight SLH400 electromechanical gate operator is suitable for sliding gates weighing up to 400 kg or with a clear opening width of 6 m. With its dimensions of 191x198 mm it is ideal when installing a sliding gate where space for the operator is limited, or for design reasons.
Also, thanks to its built-in mechanical stops there is no need to install stops on the toothed rack. This allows the operator to be installed in locations that would otherwise be difficult to accommodate:
- the sliding gate runs in front of the fence - you do not need to install the operator and toothed rack on the outside; instead, you can position them on the inside, right at the edge of the opening. With a narrow width of 19.1 cm, it reduces the clear opening by just a little, while keeping the operator on the inside.
- can be installed on a track-mounted sliding gate with very little overhang
The operator is supplied with the control unit NKA3R10 fitted inside the operator. Popular, practical control unit features:
- control using remote controls via the radio receiver
- automatic closing can be set to occur after a set time or after passing through the photocells
- inputs for wired opening, closing and step-by-step commands
- 24 V DC output for accessories
- programmable partial-opening distance for pedestrian access
- adjustable force and speed
- manual release of the operator in the event of a power failure
- possibility of connecting two operators with automatic synchronisation to automate opposing sliding gates.
An optional backup power supply can be connected to the operator NICE PS124, allowing it to perform several cycles even during a power outage. There is enough space inside the operator housing to conceal the backup power supply.
The operator includes a built-in LED light NICE WLT which can be used as a warning beacon or for area lighting.
In principle, the control unit NKA3R10 is very similar in technology to the operator NICE Robus RB400.
The operator's pinion has rack module 4.
| The set includes: | NICE-SLH400-D | |||
|---|---|---|---|---|
 |
1 × | NICE Slight SLH400 operator | NICE-SLH400 | |
|
NICE Slight SLH400 electromechanical operator with NKA3R10 control unit, for gates weighing up to 400 kg and with a leaf length of up to 6 m. |
Detail  |
|||
 |
1 × | NICE MYGO4 remote control | NICE-MYGO4 | |
|
Four-button remote control for opening an automatic gate remotely. You can use it to control four devices or send four different commands to one device. Compatible with all NICE operators using O-Code rolling-code technology (the 72-bit code offers 4.7 quadrillion combinations, making it virtually impossible to misuse) and an LED signal indicator. |
Detail |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the opening. They create an infrared beam which, when interrupted by a vehicle or pedestrian, for example, signals the operator to stop the gate or prevent it from opening. |
Detail |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Radio receiver for remote-control signals. |
Detail |
|||
 |
1 × | NICE ELDC LED beacon with antenna |
NICE-ELDC | |
|
NICE LED flashing ELDC warning light made of impact-resistant polycarbonate, with a built-in antenna for increased remote-control range (up to 150 m). |
Detail |
|||
 |
1 × | NICE Slight SLH400 installation manual | ||
|
Installation manual for a successful setup, with illustrative wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
| 1 × | Installation accessories | |||
|
Operator installation components |
||||
Recommended accessories:
- NICE Era Photocell photocells EPMB or EPSB (slim version)
- NICE remote controls MYGO, Era One or Era Inti ranges are ideal
- Nylon rack with steel reinforcement
The NICE Slight operator is also available as the exposed NICE Naked Sliding NKSL400 model. It works in the same way, but is supplied without a cover and is designed to be installed inside a 140x140 mm square profile, allowing the sliding gate operator to be hidden from view.
We apologise; we are preparing a complete operator manual. In the meantime, for external installation of the operator, you can use the illustrations from the English SLH400 manual. For all wiring and programming, use the Slovak NKSL400 manual:
| Manual for the NICE Slight SLH400 operator | NICE Naked Sliding NKSL400 drive manual |
| English | Slovak - The NKSL400 is the same drive, except it has no housing |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
