Drive kit for sliding gates up to 400 kg/6 m NICE NKSL400 (B)
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€702.86 including VAT
| Weight |
|---|
| 16 kg |
Description of Drive kit for sliding gates up to 400 kg/6 m NICE NKSL400 (B)
The compact Nice NKSL400 electromechanical gate operator is suitable for sliding gates weighing up to 400 kg or with a passage width of 6 m. The operator is supplied without covers, and is suitable for installation directly inside the gate post.
With its dimensions of 131x135x405mm it is suitable for concealed installation inside a post measuring 150x150x4mm and larger (see drawing).
Thanks to the built-in internal limit stops there is no need to install limit stops on the toothed rack. The stops can be set very quickly with a single cycle of the gate after releasing the operator.
The operator can be released from either side of the post, or remotely using the accessories NICE KIO and NICE KA1 as well.
The operator also includes a temperature sensor, and automatically adjusts the force used in response to temperature changes—for example, it automatically increases the force at low temperatures.
The operator is supplied with the control unit NKA3R10 installed directly inside the operator. Popular practical features of the control unit:
- control by remote controls via a radio receiver
- option to set automatic closing after a set time or after passing through the photocells
- inputs for wired opening, closing and step-by-step control commands
- 24 V DC output for accessories
- programmable partial-opening distance for pedestrian access
- adjustable force and speed
- operator release in the event of a power failure
- option to connect two operators with automatic synchronisation for automating opposing sliding gates.
A backup power supply can be connected to the operator as an optional accessory: NICE PS124, which enables several operating cycles even during a power outage. There is enough space inside the operator housing to fit the backup power supply.
In principle, the operator NKA3R10 is technologically very similar to the operator NICE Robus RB400.
The operator's pinion has a module 4 gear rack.
| The set includes: | NICE-NKSL400-B | |||
|---|---|---|---|---|
 |
1 × | NICE Slight NKSL400 operator | NICE-NKSL400 | |
|
The compact Nice NKSL400 electromechanical gate operator is suitable for sliding gates weighing up to 400 kg or with a passage width of 6 m. |
Detail  |
|||
 |
1 × | NICE MYGO4 remote control | NICE-MYGO4 | |
|
Four-button remote control for operating an automatic gate remotely. Use it to control four devices or send four different commands to one device. Compatible with all NICE operators using O-Code rolling-code technology (the 72-bit code allows 4.7 quadrillion combinations, making it virtually impossible to misuse) and an LED signal indicator. |
Detail |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Radio receiver for signals from remote controls. |
Detail |
|||
 |
1 × | NICE Slight NKSL400 installation manual | ||
|
Installation manual for a successful setup, with wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
| 1 × | Installation accessories | |||
|
Components for installing the operator |
||||
Recommended accessories:
- NICE Era Photocell photocells EPMB or EPSB (slim version)
- NICE remote controls ideally from the MYGO, Era One or Era Inti ranges
- Nylon gear rack with steel reinforcement
Post cut-out drawing:
Although it may look complicated at first, it is not that difficult: cut a 7 cm-diameter hole in the front of the 150x150 box section for the pinion, plus four smaller holes for mounting the operator. Cut a square opening in the back to insert and access the operator, and, optionally, holes in the sides to release it. Cover the cut-out in the back with a bent sheet-metal plate cut to size. See the box-section layout drawings:
360°:
Manual for the NICE Naked Sliding NKSL400 operator
| Manual for the NICE Naked Sliding NKSL400 operator |
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
