CAIS Kit for building a cantilever sliding gate up to 4.5 m, with 100x16 aluminum infill and NICE Robus RBS drive kit
NEW| Product availability: | within 7 days | We usually dispatch goods within 7 days. |
|---|
within 7 days
€2,259.61 including VAT
| Weight |
|---|
| 212 kg |
Description of CAIS Kit for building a cantilever sliding gate up to 4.5 m, with 100x16 aluminum infill and NICE Robus RBS drive kit
Note: This product can serve as a starting point – theset can be customised on request, and we’ll be happy to advise you on putting together your own kit to suit your gate design. The KIT offers better value than purchasing the individual components separately. If you have a specific request or would like some advice, contact us.
Everything you need for your gate. Kit for DIY construction of a cantilever sliding gate with aluminium slat infill, for a clear opening width of up to 4.5 m and a height of 1.5 m. Material: aluminium, unfinished. >> Indicative gate construction diagram. >> Gate operator manual.
The included components allow you to assemble a fully automated gate:
1. GATE CONSTRUCTION
Note: To allow the gate height and width to be adjusted as needed, the structural profiles and slats are supplied in 6-metre lengths. They must be cut to the required dimensions.
2. GATE AUTOMATION AND CONTROL
The completed gate with infill is moved using the gate operator and accessories.
- operator of the new generation NICE Robus RBS (RBS400)
- photocells
- warning light
- remote control
Surface finish
The structural profiles and aluminium slats are galvanised.
| Set SADA-KS-01-CAIS-ZN contains: | ||||
|---|---|---|---|---|
|
2 × | SPEED S trolley with eight bearing rollers | CAIS-SPEED-S | |
|
Galvanized steel trolley with 8 metal wheels. |
Details 
|
|||
|
1 × | C-profile 73x61x3,5mm with screw holes, Zn. 6m | CAIS-STAGE-SZ-6 | |
|
A guide C-profile screwed to the bottom of the gate, allowing it to run on carriages anchored in a concrete foundation. Galvanized finish.
|
Details
|
|||
|
1 × | Bottom ramp – for C-profile 73x61x3.5 | CAIS-RUN-S | |
|
The bottom guide ramp for a sliding gate slides into the C-profile and is secured to it with a clamping plate. When the gate closes, the ramp engages with the bottom stop to relieve the load on the gate. |
Details
|
|||
|
1 × | C-Profile End Cap 73x61x3.5 | CAIS-PILOT-SN | |
|
The end cap for a sliding gate C-profile is fitted at the beginning and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate. |
Details
|
|||
|
1 × | Bottom end stop for C-profile 73x61x3.5 | CAIS-LAST-S | |
|
Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed. |
Details
|
|||
|
1 × | 73x61x3.5 C-profile end cap with ramp mounting | CAIS-PILOT-SR | |
|
The CAIS PILOT SR end cap for the sliding gate C-profile is installed at the beginning of the guide C-profile. The end cap attaches to the CAIS RUN S gate stop. |
Details
|
|||
|
1 × | Top guide with two rollers for sliding gates | CAIS-FRS2 | |
|
Gate guide for vertical stabilization of the gate in the transverse direction. |
Details
|
|||
|
4 × | Galvanized square hollow section 60x60x2 mm, 6 m | JOKL-60x60x2-ZN-6 | |
|
Closed square hollow section measuring 60x60 mm with a 2 mm wall thickness. With a galvanized finish, smooth surface, 6 m long. |
Details
|
|||
|
2 × | Aluminium U-shaped mounting profile for slats, 20.5 mm wide, 6 m | AL-UP1-6 | |
|
Aluminium U-profile for attaching slats, for filling a gate or fence. Uncoated. |
Details
|
|||
|
11 × | Aluminium fence slat 100x16 mm, rectangular, unfinished, 6 m | AL-PV3-6 | |
|
An aluminium slat that can be used as infill for a fence, a gate or any other space. The slat is rectangular, measuring 100 mm high and 16 mm wide. Length: 6 metres. |
Details
|
|||
|
4 × | DIN 7982 screw, A2, 3.5x19 mm – pack of 50 pcs | S-7982-1 | |
|
Stainless steel self-tapping screw (E14S3.5, DIN 7982) for fastening aluminium slats to mounting profiles. It is compatible with the infill profile, U-profile and UT profile. Each pack contains 50 pieces. |
Details
|
|||
|
5 m | Rack with metal reinforcement | LZ-1-1 | |
|
A sliding gate with a fixed rack is moved by the drive gear via a rack-and-pinion mechanism. |
Details
|
|||
|
1 × | NICE Robus RBS400 standalone gate operator | NICE-RBS400-A | |
|
NICE Robus RBS400 gate operator for gates with a leaf weighing up to 400 kg and a leaf length of 8 m. The operator includes a built-in NICE MCU1R30 control unit with an integrated receiver.
|
Details
|
|||
|
1 × | NICE MCU1R30 control unit | NICE-MCU1R30 | |
|
Control unit with a built-in receiver for remote control. |
Details
|
|||
|
1 × | NICE MYGO4 - four-channel remote control | NICE-MYGO4 | |
|
NICE MYGO4 - four-channel remote control, rolling code, 433.92 MHz |
Details
|
|||
|
1 × | NICE EPMB - Era Photocell Medium - photocells with BlueBUS connection | NICE-EPMB | |
|
Safety photocells are installed on either side of the opening. They create an infrared beam which, when interrupted by a car or pedestrian, for example, sends a signal to the drive to stop the gate or prevent it from opening. |
Details
|
|||
|
1 × | NICE ELDC LED Beacon with Antenna | NICE-ELDC | |
|
NICE LED ELDC flashing warning light made of impact-resistant polycarbonate with a built-in antenna for greater remote-control range (up to 150 m). |
Details
|
|||
|
1 × | Manual for the Nice Robus RBS drive |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
Set of screws and rivet nuts for mounting
2x Inductive Switch
You may want to purchase a BiDi-WiFi module (optional accessory). It allows you to control the gate from your phone via MyNice and via MyNice Pro program the drive and change its supported advanced settings.
Illustrative diagram of a cantilever sliding gate structure with a clear opening width of up to 4.5 metres
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
