Kits for cantilever gates with a passage width of up to 4.5 m, with 73x61x3.5 mm C-profile
Special-price kits for a cantilever gate with a passage width of up to 4.5 m and a perforated C-profile measuring 73 × 61 × 3.5 mm. Pre-drilled holes make it easier to screw the frame to the supporting profile. You can buy a mechanical kit with or without a guide, or a complete kit with a drive.
CAIS Cantilever Sliding Gate Kit 73x61x3.5 for a Clear Opening Width of 4.5 m, Perforated Fe Profile, KIT DINO SBE 02
6 m C-profile Fe, 2 trolleys with 8 bearings, entry guide, stop pocket, profile end cap
€ excluding VAT 310,48 € including VAT 381,89within 3 days Details
CAIS Cantilever Sliding Gate Kit 73x61x3.5 for a 4.5 m opening width, perforated galvanized profile KIT DINO SZE 02
6 m galvanized C-profile, 2 carriages with 8 bearings, guide ramp, stop pocket, profile end cap
€ excluding VAT 335,23 € including VAT 412,33In stock Details
CAIS Self-supporting kit 73x61x3,5 for a sliding gate with a passage width of 4,5m, perforated Fe profile, KIT ENZO SB 03
6 m Fe C-profile, 2 trolleys with 8 bearings, guide ramp, stop pocket, guide, profile end cap
€ excluding VAT 342,81 € including VAT 421,66In stock Details
NEW CAIS Kit for building a cantilever sliding gate up to 4.5 m with NICE Robus RBS400 drive, steel
6 m C-profile, steel, carriages with 8 bearings, approach ramp, end stop, stopper, guide, end cap, Nice Robus RBS drive, toothed rack
€ excluding VAT 825,83 € including VAT 1 015,76In stock Details
CAIS Cantilever kit 73x61x3,5 for a sliding gate with a passage width of 4,5m, perforated zinc-coated profile KIT ENZO SZ 03
6 m galvanized C-profile, 2 trolley assemblies with 8 bearings, end stop, stop catcher, guide, profile end cap
€ excluding VAT 367,56 € including VAT 452,10In stock Details
NEW CAIS Kit for building a cantilever sliding gate up to 4.5 m with a NICE Robus RBS400 drive, galvanized
6 m C-profile, galvanized, trolleys with 8 bearings, run-on stop, end stop, guide, end cap, Nice Robus RBS400 drive, toothed rack
€ excluding VAT 849,59 € including VAT 1 044,99In stock Details
NEW CAIS Kit for building a cantilever sliding gate up to 4.5 m, with 100x16 aluminum infill and NICE Robus RBS drive kit
60x60x2 galvanized square hollow section, 73x61x3.5 C-profile, guide, gate infill AL-PV3, drive, control electronics
€ excluding VAT 1 837,08 € including VAT 2 259,61within 7 days Details
NEW CAIS kit for building a cantilever sliding gate up to 4.5 m, with 108x16 aluminium infill and NICE Robus RBS drive kit
60x60x2 galvanized square tube, C-profile 73x61x3.5, track, gate infill AL-PV5, drive, electronics
€ excluding VAT 1 865,55 € including VAT 2 294,63within 7 days Details
