NICE Catalogue
If you are interested in any NICE products, you can download the original catalogues. Products are most readily available from the catalogue published in 2023. For older products, see the 2012 and 2011 catalogues, or newer editions from 2013, 2016, 2020 and 2021. All catalogues are in English.
| NICE 2024 Catalogue | NICE 2023 Catalogue | NICE 2021 Catalogue |
|---|---|---|
 PDF 12.87 MB |
 PDF 20.7 MB |
 PDF 36.7 MB |
| NICE 2019/20 Catalogue | NICE 2016 Catalogue | NICE 2013 Catalogue |
 PDF 36.2 MB |
 PDF 17.4 MB |
 PDF 8.3 MB |
| NICE 2012 Catalogue | NICE 2011 Catalogue | |
 PDF 6.3 MB |
 PDF 7.1 MB |
See the complete range of NICE gate and barrier operators.
Below you will find products available to order:
12V alkaline battery for NICE Flor transmitters, 1 piece
Replacement battery for NICE Flor remote controls.
€ excluding VAT 3,85 € including VAT 4,73In stock Details
3V lithium button battery for EDSWG wireless keypads, 1 piece
Replacement battery for EDSWG keypads.
€ excluding VAT 3,63 € including VAT 4,46In stock Details
3V lithium button battery for remote controls, 1 piece
Replacement battery for CAME remote controls
€ excluding VAT 1,51 € including VAT 1,85In stock Details
NICE BM1000 – memory card for 255 codes
NICE BM1000 – memory card for 255 codes
€ excluding VAT 36,41 € including VAT 44,79In stock Details
NICE BMA2 – adapter for dual automation of the L-Fab drive
€ excluding VAT
14,78
€ including VAT
18,18
to the question Details
NICE CB – safety rubber for mechanical pressure edge 40m
€ excluding VAT
418,57
€ including VAT
514,85
to the question Details
NICE CMA 2MT – 2 m mechanical safety edge
Hollow rubber profile with a steel cable that pulls the switch. Voltage-free. Length 2 m.
€ excluding VAT 86,18 € including VAT 106,00In stock Details
NICE CRA2 - chain link CRA3, CRA4
For joining CRA3 and CRA4 chains.
€ excluding VAT 1,66 € including VAT 2,05to the question Details
NICE CRA4 – 1/2-inch drive chain, 5 m + connecting link
For use with a drive unit to move a suspended sliding gate.
€ excluding VAT 92,51 € including VAT 113,78to the question Details
NICE CRA5 - chain tensioner with brackets for a cantilever gate
For hanging gates.
€ excluding VAT 104,59 € including VAT 128,64to the question Details
NICE CRA8 – set of 2 angle brackets for mounting a shaft drive to a wall
For NICE Sumo.
€ excluding VAT 37,67 € including VAT 46,34to the question Details
NICE CRA9 – reduction adapter for shafts with diameters of 40, 35 and 31.75 mm to a diameter of 25.4 mm
For NICE Soon, Sumo, and Totman.
€ excluding VAT 75,40 € including VAT 92,74to the question Details
NICE Era Flor FLO4RCE – four-channel remote control with a 433.92 MHz rolling code and sequential coding
€ excluding VAT
37,21
€ including VAT
45,76
to the question Details
NICE Era One ON1CE – single-channel remote control with 433.92 MHz rolling code and sequential coding
NICE Era One ON2CE – two-channel remote control with 433.92 MHz rolling code and sequential coding
NICE Era One ON4CE – four-channel remote control with 433.92 MHz rolling code and sequential encoding
NICE FA2 – mounting bracket for F210, F210B, FT210 and FT210B photocells on MOCF and MOCF2 posts
€ excluding VAT
5,85
€ including VAT
7,20
to the question Details
NICE Flor FLO1R-S – 433.92 MHz single-channel remote control with rolling code
€ excluding VAT
32,73
€ including VAT
40,26
to the question Details
NICE Flor FLO1R-SC – single-channel remote control with 433.92 MHz rolling code and sequential coding
€ excluding VAT
35,19
€ including VAT
43,28
to the question Details
NICE Flor FLO2R-M – two-channel transponder remote control with rolling code, 433.92 MHz, and sequential coding
€ excluding VAT
50,47
€ including VAT
62,07
to the question Details
NICE Flor FLO2R-SC – two-channel remote control with 433.92 MHz rolling code and sequential coding
€ excluding VAT
36,78
€ including VAT
45,24
to the question Details
NICE Flor FLO4R-M – four-channel rolling-code remote control with 433.92 MHz frequency and sequential coding
€ excluding VAT
56,16
€ including VAT
69,08
to the question Details
NICE Flor FLO4R-SC - four-channel remote control with a 433.92 MHz rolling code and sequential coding
€ excluding VAT
41,16
€ including VAT
50,62
to the question Details
NICE FLOXB2R - external two-channel receiver for outdoor use, IP53
€ excluding VAT
86,78
€ including VAT
106,73
to the question Details
NICE FLOXM220R - external modular four-channel receiver
With the NICE MXD module. 230V. BM1000 memory.
€ excluding VAT 126,57 € including VAT 155,68to the question Details
NICE FLOXMR – external four-channel modular receiver
With the NICE MXD module. 24V. BM1000 memory.
€ excluding VAT 112,16 € including VAT 137,96to the question Details
NICE HSTS2EN - wireless touchscreen tablet for controlling 99 devices
€ excluding VAT
302,41
€ including VAT
371,96
to the question Details
NICE HSTSA1 – charging holder for HSTS2EN with rechargeable batteries
€ excluding VAT
62,53
€ including VAT
76,91
to the question Details
NICE HYA11 - internal cable release for the NICE Hyppo 7100 operator
€ excluding VAT
30,24
€ including VAT
37,19
to the question Details
NICE HYA12 - extended arm for the NICE Hyppo gate opener
€ excluding VAT
110,44
€ including VAT
135,84
to the question Details
NICE Hyppo 7100 HY7100 – operator for double-leaf folding gates
Non-reversible. 230V. Telescopic arm. Opening and closing stop.
€ excluding VAT 503,53 € including VAT 619,34to the question Details
NICE Hyppo 7100 HY7124 - actuator for double-leaf folding gates
Non-reversible. 24V. Telescopic arm. Magnetic encoder.
€ excluding VAT 495,04 € including VAT 608,90to the question Details
NICE IB – universal interface for connecting NICE Moonbus MOFB and MOFOB BlueBUS photocells
For control units with a conventional wiring system.
€ excluding VAT 84,12 € including VAT 103,47to the question Details
NICE M-Fab ME3000L - underground operator for a swing gate leaf up to 3 m/600 kg
Non-reversible. 230V. Slow. With a closing stop.
€ excluding VAT 337,26 € including VAT 414,83to the question Details
NICE MEA5 - release lever for M-Fab, L-Fab, and B-Fab operators
For NICE M-Fab operators
€ excluding VAT 28,93 € including VAT 35,58within 3 days Details
NICE MEA6 – end stop for M-Fab operator
€ excluding VAT
36,23
€ including VAT
44,56
to the question Details
NICE MOCARDP – contactless card for MOM and MOMB readers, programmable via NICE MOU
€ excluding VAT
11,71
€ including VAT
14,41
to the question Details
NICE Moonlight MLL - 230V gate operator signal light
€ excluding VAT 67,46 € including VAT 82,97to the question Details
NICE MyMoon MOM – contactless card reader with classic technology
For the MORX decoder, 255 cards, expandable to 512
€ excluding VAT 52,78 € including VAT 64,92In stock Details
NICE NSEA - angled measuring extension from 125 to 150 cm for NICE NSEL
€ excluding VAT 324,00 € including VAT 398,52to the question Details
NICE NSFB - SpeedForce device for measuring impact force according to EN12445, USB + Bluetooth + software
€ excluding VAT 2 605,06 € including VAT 3 204,22to the question Details
NICE NSFS – SpeedForce device for measuring impact force in accordance with EN12445, USB + software
NICE OBOX2B – Bluetooth programming device with OBOX Software Suite
€ excluding VAT
621,49
€ including VAT
764,43
within 3 days Details
NICE OTA11 – cable-operated external release kit for the NICE Ten garage door operator
NICE OTA12 - key-operated external release kit for the NICE Ten garage door operator
NICE OTA2 - NICE Ten motor bracket, length 1250mm
€ excluding VAT
33,42
€ including VAT
41,11
to the question Details
NICE OTA3 - NICE Ten motor bracket, length 2000 mm
€ excluding VAT
40,17
€ including VAT
49,41
to the question Details
NICE OTA9 - NICE Ten motor bracket, 520 mm long
€ excluding VAT
14,09
€ including VAT
17,33
to the question Details
NICE OVA3 - 5 pcs. splitters for type 6/4 R14 connectors for cascading devices on a BUS T4 network
NICE OVA4 – flat four-core cable for connecting devices to the BUS T4 network
NICE OVBT – Bluetooth module for NICE OVIEW
€ excluding VAT
237,67
€ including VAT
292,33
to the question Details
NICE OVBTGSM - GSM module for NICE OVIEW
€ excluding VAT
340,17
€ including VAT
418,41
to the question Details
NICE OX2FM - 2-channel external receiver, 868.46 MHz
Universal two-channel external receiver. For 1024 users. Rolling code.
Frequency: 868.46 MHz.
within 3 days Details
NICE OX2T - two-channel external receiver, 433.92 MHz, with signal repeater
€ excluding VAT 104,96 € including VAT 129,10to the question Details
NICE OX2TFM - 2-channel external receiver, 868.46 MHz, with signal repeater
€ excluding VAT 117,09 € including VAT 144,02to the question Details
NICE OXIT - four-channel plug-in receiver, 433.92 MHz, with signal repeater
€ excluding VAT 56,63 € including VAT 69,65to the question Details
NICE OXITFM - 4-channel plug-in receiver, 868.46 MHz, with signal repeater
€ excluding VAT
65,94
€ including VAT
81,10
to the question Details
NICE PIU – expansion card for Robo, Tub
€ excluding VAT
35,40
€ including VAT
43,54
to the question Details
NICE PS424 - backup battery for the NICE Walky WL1024C drive
Backup battery for the NICE Walky WL1024C gate opener.
€ excluding VAT 105,91 € including VAT 130,27within 14 days Details
NICE PUL – control unit cover with UP-DOWN-STOP buttons
For NICE Mindy A500, A924.
€ excluding VAT 77,31 € including VAT 95,09to the question Details
NICE PW1 heating cable, 20 W, for heating the drive and control unit, length 44 cm + 95 cm power lead
A NICE TW1 thermostat is required to use the heating cable.
€ excluding VAT 71,58 € including VAT 88,04In stock Details
NICE RNA01 – electric brake for NICE Rondo RN2010 and RN2020 operators
€ excluding VAT
41,30
€ including VAT
50,80
to the question Details
NICE ROA8 - galvanized steel rack
Module 4. 30x8x1000mm
€ excluding VAT 19,14 € including VAT 23,54to the question Details
NICE Robus RB1000P - standalone drive for sliding gates with an inductive sensor
Gate leaf weight 1000 kg, gate leaf length 12 m, magnetic switch. BlueBUS system.
€ excluding VAT 681,76 € including VAT 838,56In stock Details
NICE Robus RB600P – standalone operator for sliding gates with an inductive limit switch
Gate leaf weight 600 kg, gate leaf length 8 m, magnetic switch. BlueBUS system.
€ excluding VAT 636,58 € including VAT 783,00In stock Details
NICE Rondo RN2010 - roller shutter grille operator
Reversible. 230V. Without brake. Lifting force 130kg.
€ excluding VAT 192,13 € including VAT 236,32to the question Details
NICE Rondo RN2020 - roller grille operator
Reversible. 230V. Without brake. Lifting force 180kg.
€ excluding VAT 204,26 € including VAT 251,23to the question Details
NICE Rondo RN2030 – roller shutter grille operator
Non-reversible. 230V. With brake and manual release. Lifting force 130kg.
€ excluding VAT 223,95 € including VAT 275,46to the question Details
NICE RUA12 - 12-tooth drive gear, tooth module 6
Tooth module: 6. Number of teeth: 12.
€ excluding VAT 57,08 € including VAT 70,21In stock Details
NICE RUA2 – control unit for the NICE Run RUN2500I operator
For the NICE RUN2500I drive
€ excluding VAT 237,63 € including VAT 292,28In stock Details
NICE RUA3 - inverter for the NICE Run RUN2500I drive
€ excluding VAT
306,36
€ including VAT
376,82
to the question Details
NICE Run RUN1500P – standalone drive for sliding gates
Gate leaf weight 1500 kg, gate leaf length 14 m, magnetic switch. BlueBUS system.
€ excluding VAT 840,42 € including VAT 1 033,72to the question Details
NICE SIA1 - base plate with anchors for installing the WIDE S, WIDE M and S-bar barriers
€ excluding VAT
51,06
€ including VAT
62,81
within 3 days Details
NICE SIA2 – base plate with anchors for installing the WIDE L barrier
€ excluding VAT
56,46
€ including VAT
69,44
within 3 days Details
NICE Signo SIGNO3 – barrier for openings up to 3 m
Up to 3 m. Non-reversible. 230 V power supply. 24 V motor. Galvanized + painted.
€ excluding VAT 1 475,59 € including VAT 1 814,98to the question Details
NICE Signo SIGNO3I - barrier for openings up to 3 m
Up to 3 m. Non-returnable. 230 V power supply. 24 V motor. Stainless steel.
€ excluding VAT 2 092,09 € including VAT 2 573,27to the question Details
NICE Signo SIGNO4 – barrier for openings up to 4 m
Up to 4 m. Non-returnable. 230 V power supply. 24 V motor. Galvanized + painted.
NICE Signo SIGNO4I - barrier gate up to 4 m
Up to 4 m. Non-returnable. 230 V power supply. 24 V motor. Stainless steel.
€ excluding VAT 1 686,33 € including VAT 2 074,19to the question Details
NICE Signo SIGNO6 - barrier up to 6 m
Up to 6 m. Non-returnable. 230 V power supply. 24 V motor. Galvanized + painted.
NICE Signo SIGNO6I - barrier for openings up to 6 m
Up to 6 m. Non-reversible. 230 V power supply. 24 V motor. Stainless steel.
€ excluding VAT 2 054,77 € including VAT 2 527,36to the question Details
NICE Tag TT1L – miniature control unit with a built-in receiver for remote control of 230 V lights
IP55 protection. Suitable for lighting and irrigation.
€ excluding VAT 85,57 € including VAT 105,25to the question Details
NICE TCA65 – 200 cm aluminium profile for a pressure safety edge
€ excluding VAT
18,27
€ including VAT
22,47
to the question Details
NICE TCBS60 - passive pressure-sensitive safety edge 10 m
€ excluding VAT
294,06
€ including VAT
361,69
to the question Details
NICE TCE - interface for pressure-sensitive safety edges
€ excluding VAT
59,49
€ including VAT
73,17
to the question Details
NICE TCK – mounting kit for connecting 8 pressure-sensitive safety edges together
€ excluding VAT 444,91 € including VAT 547,24within 3 days Details
NICE TCW1 - wireless transmitter for safety edges
€ excluding VAT 84,12 € including VAT 103,47to the question Details
NICE TCW2 – photovoltaic panel and wireless transmitter for safety edges
€ excluding VAT
122,60
€ including VAT
150,80
to the question Details
NICE Ten TN2010L - operator for up-and-over garage doors
€ excluding VAT
596,01
€ including VAT
733,09
to the question Details
NICE Ten TN2020L – operator for up-and-over garage doors
€ excluding VAT
346,36
€ including VAT
426,02
to the question Details
NICE Ten TN2030L - operator for up-and-over garage doors
€ excluding VAT
503,45
€ including VAT
619,24
to the question Details
NICE TNA1 - control unit for NICE Ten garage door operators TN2030, TN2030L, TNKCE, TNLKCE
€ excluding VAT
227,70
€ including VAT
280,06
to the question Details
NICE TNA2 – control unit for NICE Ten TN2010 and TN2010L garage door operators
€ excluding VAT 211,64 € including VAT 260,32to the question Details
NICE TNA38 – guide device for the drive shaft of NICE Ten operators
€ excluding VAT
24,17
€ including VAT
29,73
to the question Details
NICE TNA4 - 20x20mm shaft, 1500mm long, for NICE Ten motors
€ excluding VAT
29,41
€ including VAT
36,17
to the question Details
NICE TNA5 – pair of standard straight telescopic arms for NICE Ten actuators
€ excluding VAT
57,98
€ including VAT
71,32
to the question Details
NICE TNA6 - pair of standard curved telescopic arms for NICE Ten operators
€ excluding VAT
67,46
€ including VAT
82,97
to the question Details
NICE TNA8 – 20 × 20 mm shaft, 200 mm long, for NICE Ten operators
€ excluding VAT
5,98
€ including VAT
7,36
to the question Details
NICE TNA9 - extension cable and brackets for mounting the NICE PS324 backup power supply on a wall
€ excluding VAT
7,89
€ including VAT
9,71
to the question Details
NICE TW1 adjustable thermostat from -20˚ to 0˚C with power supply for heating cables
Thermostat for NICE PW1 heating cable
€ excluding VAT 78,14 € including VAT 96,12In stock Details
NICE Very VR – two-channel remote control with a rolling code
NICE Very VR remote control. Rolling code.
Frequency: 433.92 MHz
In stock Details
NICE WA14 - articulated joint for WA1 arms for low installations
Folding joint for low-clearance installations
€ excluding VAT 157,13 € including VAT 193,27within 3 days Details
NICE WA15 - foundation plate with anchors for installing the WIL4 and WIL4I barriers
€ excluding VAT
46,62
€ including VAT
57,34
to the question Details
NICE WA16 - base plate with anchors for installing the WIL6 and WIL6I barriers
€ excluding VAT
56,08
€ including VAT
68,98
to the question Details
NICE WA2 – 8 m red protective rubber edge trim with end caps
Protective rubber strip with end caps for WA1 arm
€ excluding VAT 50,39 € including VAT 61,98within 3 days Details
NICE WA24 – white tubular aluminium telescopic arm, up to 8.5 m long, with counterweight and WA12 support
NICE WA3 – white tubular aluminium arm 70x4250mm
Aluminium boom suitable for windy conditions, 70 mm diameter. For the WIL4 barrier.
NICE WA4 – bracket for the WA3 arm
Bracket for attaching the WA3 arm to the barrier.
€ excluding VAT 68,15 € including VAT 83,82In stock Details
NICE WA6 – 12 m red protective edge rubber strip with end caps
Protective rubber strip with end caps for WA21 arm
€ excluding VAT 69,17 € including VAT 85,08to the question Details
NICE Wil WIL4 - barrier gate for up to 4 m
Up to 4 m. Non-returnable. 230 V power supply. 24 V motor. Galvanized + painted.
NICE Wil WIL4I – barrier for openings up to 4 m
Up to 4 m. Non-returnable. 230 V power supply. 24 V motor. Stainless steel.
€ excluding VAT 1 524,61 € including VAT 1 875,28to the question Details
NICE Wil WIL6I – barrier gate up to 6 m
Up to 6 m. Non-returnable. 230 V power supply. 24 V motor. Stainless steel.
