Kits for cantilever gates with a passage width of up to 4.5 m, with a galvanized C-profile - Zn
Kits for cantilever gates with a clear opening of up to 4.5 m and a galvanized C-profile ZN. The galvanized profile is ready for outdoor use and saves you from having to finish the load-bearing section separately. The range includes standalone mechanical kits as well as complete kits with a drive.
Kit for building a cantilever sliding gate with a passage width of 4.5 m, with a galvanized C-profile
6 m C-profile – galvanized
5-bearing roller carriages, end stop, socket, guide, end cap
In stock Details
TOP Kit for building a cantilever sliding gate up to 4.5 m, galvanized C-profile and NICE Robus RBS operator
6 m C-profile – galvanized
carriages with 5 bearings, ramp, pocket, guide, end cap
drive, toothed rack
In stock Details
CAIS Cantilever Sliding Gate Kit 73x61x3.5 for a 4.5 m opening width, perforated galvanized profile KIT DINO SZE 02
6 m galvanized C-profile, 2 carriages with 8 bearings, guide ramp, stop pocket, profile end cap
€ excluding VAT 335,23 € including VAT 412,33In stock Details
CAIS Cantilever kit 73x61x3,5 for a sliding gate with a passage width of 4,5m, perforated zinc-coated profile KIT ENZO SZ 03
6 m galvanized C-profile, 2 trolley assemblies with 8 bearings, end stop, stop catcher, guide, profile end cap
€ excluding VAT 367,56 € including VAT 452,10In stock Details
98x98x5 kit for making a cantilever sliding gate with a passage width of up to 4.5 m, galvanized, 9-roller carriages
C-profile ZN 6m
carriages with 9 bearings, ramp, pocket, end cap
In stock Details
Kit for building a cantilever sliding gate with a passage width of 4.5 m, with a galvanized C-profile
6 m C-profile – galvanized
Carriages with 5 bearings, ramp, socket, end cap
In stock Details
CAIS Cantilever sliding gate kit 95x86x5 for a passage width of 4.5 m, perforated galvanized profile, KIT DEMO MZE 03
6 m galvanized C-profile, 2 carriages with 8 bearings, guide ramp, stop catcher, guide, profile end cap
€ excluding VAT 653,17 € including VAT 803,40In stock Details
NEW CAIS Kit for building a cantilever sliding gate up to 4.5 m with a NICE Robus RBS400 drive, galvanized
6 m C-profile, galvanized, trolleys with 8 bearings, run-on stop, end stop, guide, end cap, Nice Robus RBS400 drive, toothed rack
€ excluding VAT 849,59 € including VAT 1 044,99In stock Details
98x98x5 kit for building a self-supporting sliding gate for a passage width of up to 4.5 m, galvanized, 5-roller carriages
C-profile Zn 6m
5-bearing trolleys, guide ramp, pocket, end cap
In stock Details
Kit for making a cantilever sliding gate for an opening up to 4.5 m wide, with a galvanized perforated C-profile
Perforated C-profile 6 m – galvanized
Trolleys with 5 bearings, run-on guide, pocket, guide, end cap
In stock Details
