Kit for making a sliding gate up to 3.0 m wide with a NICE drive and accessories
| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
| Available variant types for this product Kit for making a sliding gate up to 3.0 m wide with a NICE drive and accessories | ||
| Wheel type: |
You can choose wheels with a bracket, recessed, or recessed with a support. |
|
|---|---|---|
|
Wheels
for bolting with bracket Recessed
screw-in wheels Wheels
welding recessed |
||
| Guide type: |
Top guide Use it if the infill of your gate (e.g. wooden slats, Lexan, expanded metal) does not extend above the gate. Anchor it to the existing fence or to an adjustment post. |
|
|
Side
guide Top
guide |
||
€663.78 including VAT
| Weight |
|---|
| 36 kg |
Description of Kit for making a sliding gate up to 3.0 m wide with a NICE drive and accessories
Note:The SET is more cost-effective than purchasing the components individually at a discounted price. We can adjust the contents of the SET to your requirements and apply an appropriate discount. If you have a specific request or would like advice, contact us.
| The set includes: | SADA-16 | |||
|---|---|---|---|---|
 |
2 × | Ø80 mm wheel | ||
|
Choose from three versions:
|
Detail  |
|||
 |
2 × | 3 m long U-shaped track | KLB-KOL16-US-ZN3 | |
|
Sliding gate guide track. |
Detail |
|||
 |
1 × | Lower stop with base plate | KLB-SD-2 | |
|
Used to stop the sliding gate. |
Detail |
|||
 |
1 × | Adjustable upper stop, 40–99 mm | UB-40-100 | |
|
Upper stop for sliding gates with an adjustable width of 40–99 mm. |
Detail |
|||
 |
1 × | Gate guide | ||
|
Gate guide for vertical stabilization of the gate in the transverse direction. Choose either an upper (1 × VVR-3-G) or a side guide (2 × BR-43G). |
Side-mounted Top-mounted |
|||
 |
1 × | NICE Road 400 gate opener | NICE-RD400 | |
|
NICE electromechanical gate opener with an RBA4R10 control unit and built-in receiver, for gates weighing up to 400 kg. |
Detail |
|||
 |
1 × | NICE Era INTI2 remote control | NICE-INTI2 | |
|
Two-button remote control for operating a gate automatically from a distance. Use it to control two devices, or to send two different commands to one device. |
Detail |
|||
 |
1 × | Pair of NICE EPM photocells | NICE-EPM | |
|
Safety photocells are installed on either side of the opening. They create an infrared beam that, when interrupted by a vehicle or pedestrian, for example, signals the gate opener to stop the gate or prevent it from opening. |
Detail |
|||
 |
1 × | NICE ELDC LED beacon with antenna | NICE-ELDC | |
|
NICE ELDC LED warning light made of impact-resistant polycarbonate, with a built-in antenna to extend the remote control range (up to 150 m). |
Detail |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it disengages the gate opener's drive gear so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Road 400 installation manual | ||
|
Installation manual for successful installation, with illustrative wiring diagrams and instructions for programming and pairing remote controls. |
Download |
|||
| 1 × | Gate opener installation accessories | |||
|
Gate opener installation components, height adjustment screws, mounting plate, anchor covers and limit stops for the gate opener sensor. |
||||
 |
3 m | Toothed rack with metal reinforcement | LZ-1-3 | |
|
A sliding gate with a fixed toothed rack is moved by the drive’s pinion engaging with the rack. |
Details |
|||
All metal components are protected with a zinc coating. Go to the KIT components description.
Delivery KITS
All KITS for sliding gates are in stock. We will deliver the KIT to you by courier directly to your address. You can pay cash on delivery (to the driver when you receive the goods) or by bank transfer in advance. Another option is to collect the kit in person in Nové Mesto nad Váhom.
Ordering THE KIT
You can order the KIT:
| 1. By email or phone, contact us. | |
|
2. Through the cart:
|
Installing a sliding gate using components from the KIT
The sliding gate kit comes with an installation drawing showing the recommended dimensions for the concrete foundation and example dimensions for track-mounted gates.
We’d be happy to advise you on the contents of your kit or its installation. You can:
| Fill in the form | Call or write to us |
|---|---|
| Ask a sales representative for advice | Contact us. |
In the gallery you’ll find customer installations of sliding gates built using our components.
Extended warranty
All metal components in this KIT are covered by an extended 36-month warranty. The warranty covers metal components as well as nylon parts.
All and automation electronics in our store are covered by the standard warranty of 24 months.
The invoice supplied with your delivery serves as the warranty certificate.
KIT description for building a cantilever sliding gate
Complete KIT for building a track-mounted sliding gate for a clear opening width of up to 3.0 m and a maximum total weight of 250 kg for the track-mounted gate. The complete kit is offered at a discounted price. An additional track is available on request, allowing you to achieve a clear opening wider than 3.0 m.
The kit includes a complete set for automating a sliding gate: gate operator and electronic accessories (remote control, flashing light, photocells).
The parts in this KIT are selected so that no additional components are needed for a manually operated gate (you can, however, add items to the kit, such as a hook lock or top stop).
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
