Kit for building a cantilever gate up to 4.5 m, with 108x16 aluminium infill and a NICE Robus RBS drive kit
NEW| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
In stock
€2,793.79 including VAT
| Weight |
|---|
| 171 kg |
Description of Kit for building a cantilever gate up to 4.5 m, with 108x16 aluminium infill and a NICE Robus RBS drive kit
Note: This product can serve as a starting point – we canadjust the set to your specifications on request, and we’ll be happy to advise you on designing and assembling your own set of components. The SET is discounted compared with buying the individual components. If you have a specific request or would like some advice, contact us.
Everything you need for your gate. DIY kit for building a self-supporting sliding gate with aluminium slat infill, for a clear opening width up to 4.5 m with a height of 1.5 m. Material: aluminium, unfinished. >> Indicative gate construction diagram. >> Gate operator manual.
Assemble a complete automated gate from the included components:
1. GATE CONSTRUCTION
Note: To allow the gate height and width to be adjusted as needed, the structural profiles and slats are supplied in 6-metre lengths. They need to be cut to the required dimensions.
2. GATE AUTOMATION AND CONTROL
Operate the finished gate with infill using the gate operator and accessories.
- gate operator of the latest generation NICE Robus RBS (RBS400)
- photocells
- warning light
- remote control
Surface finish
The structural profiles and aluminium slats can be painted in any colour; they are supplied in their raw, unfinished state.
| Set SADA-KS-02 contains: | ||||
|---|---|---|---|---|
|
2 × | Trolley with five rollers (V-02-3) | V-02-3 | |
|
You can choose nylon or metal rollers. Nylon rollers allow the gate to carry heavy loads, prevent wear on the C-profile, and ensure quiet gate operation. Nylon and metal rollers are the same price. |
Details 
|
|||
|
1 × | Aluminium C-profile 83x79x11 mm, AL, 6 m | CP-AL-83x79-6 | |
|
A heavy-duty C-shaped aluminium guide rail welded to the bottom of the gate frame, allowing the gate to run on carriages anchored in a concrete foundation. |
Details
|
|||
|
1 × | Bottom guide roller - galvanized, 83x79 | SN-347M | |
|
The guide roller is mounted at the start of the C-profile and runs into the lower stop fitted to the closing post, relieving the gate when it is closed. |
Details
|
|||
|
1 × | Galvanized steel bottom stop | DK-1-80 | |
|
Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed. |
Details
|
|||
|
2 × | Self-supporting gate C-profile end cap – galvanized, 83x79 | SK-20M | |
|
A gate end pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the rollers when the gate is closed. |
Details
|
|||
|
4 × | Square aluminium box section 60x60x3 mm, 6 m | AL-60x60x3-6 | |
|
Unfinished aluminium box section for fabricating structures. For example, for making a gate. |
Details
|
|||
|
1 × | Top guide with two adjustable rubber-coated rollers | VVR-3-G | |
|
Gate guide for vertical stabilization of the gate in the transverse direction. |
Details
|
|||
|
11 × | Aluminium fence slat, 108x16 mm, parallelogram shape, 6 m | AL-PV5-6 | |
|
Aluminium slat, which can be used as infill for a fence, gate, or any other space. The slat is rectangular, measuring 100 mm high and 16 mm wide. Length: 6 metres. |
Details
|
|||
|
2 × | Aluminium fixing profile for slats, U-shaped, 50 mm wide, AL-UP3, 6 m | AL-UP3-6 | |
|
Aluminium U-profile for attaching slats, for gate or fence infill. Without surface treatment |
Details
|
|||
|
4 × | DIN 7982 screw, A2, 3.5x19 mm – pack of 50 pcs | S-7982-1 | |
|
Stainless steel self-tapping screw (E14S3.5, DIN 7982) for fastening aluminium slats to mounting profiles. It is compatible with the infill profile, U-profile and UT profile. Each pack contains 50 pieces. |
Details
|
|||
|
1 × | NICE Robus RBS400 standalone gate operator | NICE-RBS400-A | |
|
NICE Robus RBS400 gate operator for gates with a leaf weighing up to 400 kg and a leaf length of 8 m. The operator includes a built-in NICE MCU1R30 control unit with an integrated receiver.
|
Details
|
|||
|
1 × | NICE MCU1R30 control unit | NICE-MCU1R30 | |
|
Control unit with a built-in receiver for remote control. |
Details
|
|||
|
1 × | NICE MYGO4 - four-channel remote control | NICE-MYGO4 | |
|
NICE MYGO4 - four-channel remote control, rolling code, 433.92 MHz |
Details
|
|||
|
1 × | NICE ELDC LED Beacon with Antenna | NICE-ELDC | |
|
NICE LED ELDC flashing warning light made of impact-resistant polycarbonate with a built-in antenna for greater remote-control range (up to 150 m). |
Details
|
|||
|
1 × | NICE EPMB - Era Photocell Medium - photocells with BlueBUS connection | NICE-EPMB | |
|
Safety photocells are installed on either side of the opening. They create an infrared beam which, when interrupted by a car or pedestrian, for example, sends a signal to the drive to stop the gate or prevent it from opening. |
Details
|
|||
|
1 × | Manual for the Nice Robus RBS operator |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
2x Inductive Switch
You may want to consider purchasing the BiDi-WiFi module (optional accessory). It allows you to control the gate with your phone via MyNice and use MyNice Pro to program the drive and change its supported advanced settings.
Illustrative diagram of a cantilever sliding gate structure with a passage width of up to 4.5 metres
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
