NICE Robus Hi-Speed RB500 HS (F) gate operator kit for gates up to 500 kg/7 m
| Product availability: | replaced | This product is no longer manufactured, but fortunately it has been replaced by a newer model. |
|---|
Description of NICE Robus Hi-Speed RB500 HS (F) gate operator kit for gates up to 500 kg/7 m
Available replacement!
The kit with a fast operator for NICE Robus Hi-Speed RB500 HS (F) sliding gates has been replaced by a kit with a newer operator model, NICE Robus Hi-Speed RBS600 HS (F).
NICE Robus Hi-Speed RB500 HS gate operator is designed for fast movement of sliding gates up to 500 kg and a clear opening width up to 7 m. Gate speed up to 26.4 m/min.
It has an electromechanical stop switch. The operator is non-reversible.
| The kit includes: | NICE-RB500-HS-F | |||
|---|---|---|---|---|
 |
1 × | NICE Robus Hi-Speed RB500 HS | NICE-RB500-HS | |
|
The NICE Robus RB500-HS electromechanical gate operator, with a built-in RBA3/HS control unit, is designed for fast gate opening and can operate a gate weighing up to 400 kg with a leaf length of up to 7 m. |
Details  |
|||
 |
1 × | NICE MYGO4 remote control | NICE-MYGO4 | |
|
Four-button remote control for automatic remote gate opening. It can control four devices, or send four different commands to a single device. Compatible with all NICE operators using O-Code rolling-code technology (the 72-bit code allows 4.7 quadrillion combinations, making it virtually impossible to misuse) and an LED indicator for the transmitted signal. |
Details |
|||
 |
1 × | Pair of NICE Era Photocell EPMB photocells | NICE-EPMB | |
|
Safety photocells are installed on either side of the clear opening. They create an infrared beam that, when interrupted by a vehicle or pedestrian, for example, sends a signal to the operator to stop the gate or prevent it from opening. |
Details |
|||
 |
4 × | Gear rack with metal reinforcement |
LZ-1-1 | |
|
A sliding gate with a rack fixed to it is driven by the operator's pinion via a rack-and-pinion mechanism. |
Details |
|||
 |
1 × | NICE ELDC LED warning light with antenna |
NICE-ELDC | |
|
NICE LED flashing ELDC warning light made of impact-resistant polycarbonate, with a built-in antenna to extend the remote control range (up to 150 m). |
Details |
|||
 |
1 × | NICE OXIBD receiver | NICE-OXIBD | |
|
Receiver for radio signals from remote controls. |
Details |
|||
 |
2 × | Release key | ||
|
In the event of a power failure, it disengages the operator's drive gear so the gate can be moved manually by pushing or pulling. |
||||
 |
1 × | NICE Robus RB500-HS installation manual | ||
|
Installation manual for successful installation, with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
|
|||
 |
2 × | End stop (left + right) | ||
|
The operator's limit switch stops are mounted on the gear rack and define the gate's travel length. |
||||
| 1 × | Installation accessories | |||
|
Operator installation components, height-adjustment screws, mounting plate, anchor covers and stops for the operator sensor. |
||||
Operator technical specifications NICE ROBUS RB-500-HS
| Power supply | (Vac 50 Hz) | 230 |
|---|---|---|
| Power consumption | (VA) | 450 |
| Protection rating | (IP) | 44 |
| Operating cycles | (cycles/hour) | 20 |
| Speed | (m/s) | 0.4 |
| Max. torque | (Nm) | 18 |
| Max. gate weight | (kg) | 500 |
| Operating temperature | (°C) | -20 to +50 |
| Insulation class | 1 | |
| Module of the gear rack | 4 |
For more information about the drive, visit the page for the drive itself NICE ROBUS 500HS.
Manuals and documents for download
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
