Kits for cantilever gates with a passage width of up to 4.5 m, with a 70x70x4 mm C-profile
Discounted kits for building a cantilever gate with a clear opening of up to 4.5 m and a 70 × 70 × 4 mm C-profile. Choose from versions with a guide rail, without a guide rail, or as a complete kit with a drive.
TOP Kit for building a cantilever sliding gate with a passage width of 4.5 m
C-profile 6m
Trolleys with 5 bearings, end stop, socket, guide, end cap
In stock Details
TOP Kit for building a cantilever sliding gate up to 4.5 m with NICE Robus RBS operator
C-profile 6 m
trolleys with 5 bearings, run-on guide, pocket, guide, end cap
drive, toothed rack
In stock Details
Kit for building a cantilever sliding gate with a passage width of 4.5 m, with a galvanized C-profile
6 m C-profile – galvanized
5-bearing roller carriages, end stop, socket, guide, end cap
In stock Details
TOP Kit for building a cantilever sliding gate up to 4.5 m, galvanized C-profile and NICE Robus RBS operator
6 m C-profile – galvanized
carriages with 5 bearings, ramp, pocket, guide, end cap
drive, toothed rack
In stock Details
Kit for building a cantilever sliding gate with a clear opening width of up to 4.5 m
C-profile 6 m
trolleys with 5 bearings, guide ramp, pocket, end cap
In stock Details
Kit for building a cantilever sliding gate with a passage width of 4.5 m, with a galvanized C-profile
6 m C-profile – galvanized
Carriages with 5 bearings, ramp, socket, end cap
In stock Details
