NICE Toona 5016P drive kit for a single-leaf gate with higher load capacity, one leaf up to 5 m/800 kg, with accessories
TOP| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
in stock
€938.76 including VAT
| Weight |
|---|
| 13 kg |
Description of NICE Toona 5016P drive kit for a single-leaf gate with higher load capacity, one leaf up to 5 m/800 kg, with accessories
Drive kit NICE Toona 5 TO5016P is designed for automating swing gates with heavier loads, up to a leaf length of 5 m and a weight of 800kg. The operator is based on 230V and features an electromechanical limit switch for both opening and closing (on both sides, the end position is determined by a switch directly on the arm). The operator is non-reversible. Operators Toona are currently at the forefront of swing gate automation in both residential and industrial settings. Download the manual ».
| Set NICE-TO5016P-BE1 contains: | ||||
|---|---|---|---|---|
|
1 × | NICE Toona TO5016P gate operator | NICE-TO5016P | |
|
NICE Toona TO5016P electromechanical gate operator for heavier loads, supporting gate leaves weighing up to 800 kg and measuring up to 5 m in length.
|
Details 
|
|||
|
1 × | NICE MC800 Control Unit | NICE-MC800 | |
|
The control unit in a designer enclosure, which contains the MCA5 control board to which the drives and accessories are connected, is part of the automation system. |
Details
|
|||
|
1 × | NICE MYGO4 - four-channel remote control | NICE-MYGO4 | |
|
NICE MYGO4 - four-channel remote control, rolling code, 433.92 MHz |
Details
|
|||
|
1 × | NICE OXIBD remote control receiver | NICE-OXIBD | |
|
Radio signal receiver for remote controls. Supports two-way communication with selected remote control models. Range of up to 200m with an antenna. |
Details
|
|||
|
1 × | NICE EPM photocells with conventional wiring | NICE-EPM | |
|
NICE EPM outdoor safety photocells are installed opposite each other across the gate opening, or at any point where there is a risk of the gate hitting an obstacle. |
Details
|
|||
|
1 × | NICE ELAC LED beacon with antenna | NICE-ELAC | |
|
NICE LED flashing warning light ELAC, made of impact-resistant polycarbonate, with a built-in antenna for increased remote-control range (up to 150 m). |
Details
|
|||
|
1 × | Installation Manual |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
2 pcs. release keys
Mounting accessories
APPLICATION RANGE
For a gate leaf weighing up to 800kg and measuring up to 5m, according to the following application chart:
TECHNICAL SPECIFICATIONS
| Power supply | 230V |
|---|---|
| Current draw | 1,5A |
| Power | 340W |
| Speed | 0,013m/s |
| Force | 3200N |
| Cycles/hour* | 54 |
| Protection rating | IP44 |
| Operating temperature | -20°C to +50°C |
| Dimensions | 965x115x105mm |
| Weight | 7kg |
* under optimal installation conditions
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
