NICE MCU1 – control unit for the new generation of NICE Robus RBS and Spider800 operators
| Product availability: | within 3 days | We usually ship the goods within 3 days. |
|---|
within 3 days
€258.53 including VAT
| Weight |
|---|
| 0,50 kg |
Description of NICE MCU1 – control unit for the new generation of NICE Robus RBS and Spider800 operators
New-generation control unit NICE MCU1 for drives NICE Robus RBS400, NICE Robus RBS600, NICE SPIDER800.
The control unit includes a built-in two-way receiver for operating the drive using remote controls.
The new control unit lets you operate the gate and check its current status remotely using a mobile app. The IBT4N connector is used for this purpose; a Wi-Fi device can be connected to it NICE IT4WIFI or programmer NICE OVIEW.
How to reset the MCU1 control unit
1. Press and hold the CLOSE and OPEN buttons simultaneously until the programming LEDs “L1 to L8” light up (after approximately 3 seconds).
2. Release the buttons.
3. The operation was successful if the programming LEDs “L1” to “L8” flash rapidly for 3 seconds.
This procedure can also be used to clear all errors stored in the memory. This procedure does not delete the radio codes stored in the radio receivers (built-in and/or external).
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
