CAIS Kit for building a cantilever sliding gate up to 6.5 m, KIT DEMO MBE 23 with NICE Robus RBS600 operator, Fe
NEW| Product availability: | In stock | We normally dispatch goods within 24 hours. |
|---|
In stock
€1,635.68 including VAT
| Weight |
|---|
| 134 kg |
Description of CAIS Kit for building a cantilever sliding gate up to 6.5 m, KIT DEMO MBE 23 with NICE Robus RBS600 operator, Fe
KIT DEMO MBE 23 component set for building a cantilever sliding gate with a clear opening width of up to 6.5 m/625kg. All components except the C-profile are galvanized.
| Set SADA-RBS600-CAIS-DEMO-MBE-23 contains: | ||||
|---|---|---|---|---|
|
1 × | C-profile 95x86x5mm with holes for bolting, Fe, 6m | CAIS-STAGE-MB-6 | |
|
A C-channel bolted to the bottom of the gate, which allows the gate to run on carriages anchored in a concrete foundation. Unfinished, raw steel.
|
Details 
|
|||
|
1 × | C-profile 95x86x5mm with holes for bolting, Fe, 3m | CAIS-STAGE-MB-3 | |
|
Guide C-profile screwed to the bottom of the gate, allowing it to run on carriages anchored in the concrete foundation. Unfinished, raw steel.
|
Details
|
|||
|
2 × | Trolley with 8 bearing rollers | CAIS-SPEED-ME | |
|
Galvanized steel trolley with 8 metal wheels. |
Details
|
|||
|
1 × | Lower guide ramp – for C-profile 95x86x5 | CAIS-RUN-M | |
|
The bottom guide ramp for a sliding gate slides into the C-profile and is secured to it with a clamping plate. The ramp engages with the bottom stop to take the weight off the gate when it is closed. |
Details
|
|||
|
1 × | Lower end stop for C-profile 95x86x5 | CAIS-LAST-M | |
|
Run-off pocket mounted at the bottom of the gate stop post. Relieves the compressive and tensile forces acting on the roller carriages when the gate is closed. |
Details
|
|||
|
1 × | 95x86x5 C-profile cap | CAIS-PILOT-MN | |
|
The end cap for a sliding gate C-profile is fitted at the start and, if required, at the end of the guide C-profile. It slides into the C-profile and is secured to it with a clamping plate. |
Details
|
|||
|
1 × | C-profile cover 95x86x5 with mounting to the guide rail | CAIS-PILOT-MR | |
|
The CAIS PILOT MR end cap for the sliding gate C-profile is installed at the beginning of the guide C-profile. The end cap is attached to the CAIS RUN M gate stop. |
Details
|
|||
|
1 × | Top guide with two rollers for sliding gates | CAIS-FRM2 | |
|
Gate guide for vertical stabilization of the gate in the transverse direction. |
Details
|
|||
|
6 m | Rack with metal reinforcement | LZ-1-1 | |
|
A sliding gate with a fixed rack is moved by the drive gear via a rack-and-pinion mechanism. |
Details
|
|||
|
1 × | NICE MYGO4 - four-channel remote control | NICE-MYGO4 | |
|
NICE MYGO4 - four-channel remote control, rolling code, 433.92 MHz |
Details
|
|||
|
1 × | NICE EPMB - Era Photocell Medium - photocells with BlueBUS connection | NICE-EPMB | |
|
Safety photocells are installed on either side of the opening. They create an infrared beam which, when interrupted by a car or pedestrian, for example, sends a signal to the drive to stop the gate or prevent it from opening. |
Details
|
|||
|
1 × | NICE ELDC LED Beacon with Antenna | NICE-ELDC | |
|
NICE LED ELDC flashing warning light made of impact-resistant polycarbonate with a built-in antenna for greater remote-control range (up to 150 m). |
Details
|
|||
|
1 × | NICE Robus RBS600 standalone drive | NICE-RBS600-A | |
|
NICE Robus RBS600 gate operator for gates with a leaf weight of up to 600 kg and a leaf length of 8 m. The operator includes a built-in NICE MCU1R30 control unit with an integrated receiver.
|
Details
|
|||
|
1 × | Installation manual for the cantilever gate kit |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
|
|
1 × | Installation Manual for the Nice Robus RBS Operator |
Download
|
|
|
Installation manual with illustrated wiring diagrams and instructions for programming and pairing remote controls. |
||||
Set of screws and rivet nuts for mounting
2x Inductive Switch
You may want to purchase an additional BiDi-WiFi module (optional accessory). It allows you to control the gate from your mobile phone via MyNice and use MyNice Pro to program the drive and change its supported advanced settings.
Benefits and features of the CAIS-DEMO-MBE-23 kit
- Easy to install thanks to well-thought-out details, and quick installation thanks to screwing the C-profile to the structure, eliminating the need to weld the C-profile.
- Mounting screws and rivet nuts are included for securing the C-profile to the structure through the holes in the C-profile, which are spaced at least 400mm apart.
- The untreated raw-steel C-profile, with a serial number and 100% tested with the trolleys, is exceptionally precise.
- High-quality trolley bearings. The centers of the trolley wheels are drilled, not laser-cut.
- Tested from -37°C to +50°C
- German steel. Japanese robots. Made in the Czech Republic.
Example of the CAIS-DEMO-MBE-23 kit's suitability for building a cantilever sliding gate
The kit is suitable for a clear opening width of up to 6.5 m and a total gate weight of 625 kg. The following drawing shows dimensions for illustrative clear opening widths, together with recommended structural profiles. The table below shows the dimensions for each clear opening width of a cantilever sliding gate.
Cross-section of the gate with trolleys and guide
Original manufacturer code: CAIS KIT DEMO MBE 23 1710072
How can I order this item?
Choose the option that suits you:
- order online: use the buy button to add the goods to your shopping cart (you will find the buy button here in the product variants table).
- order by email: place your order at [email protected]
